2007 Gmc 2500 Reg Cab Duramax 4x4 on 2040-cars

Auto blog

GMC moved the headlights down on the 2024 Sierra EV to prevent glare

There are a lot of things that are different between the 2024 GMC Sierra EV’s design and the gasoline Sierra pickup, but one we noticed right away was the headlight placement. On GMÂ’s full-size gasoline trucks, the headlights are about as far up the front fascia as they can be. In the Sierra EV, theyÂ’re positioned significantly further down and into the lower bumper below the grille. Why are we highlighting this particular aspect of the design? Well, unless you only ever drive massive, high-riding trucks, youÂ’re probably very accustomed to being frequently blinded by them on the road these days. In describing the Sierra EVÂ’s headlight placement, designers told us they intentionally put the lights further down to improve matters. We pulled Phil Kucera, a GMC design manager, aside to ask him about the change. “It tends to be a better spot where itÂ’s not glaring in other peopleÂ’s eyes, right, the lower you get,” Kucera says. Beyond blinding others, putting the headlights lower on the face of the truck improves headlight performance for the driver, too. “Typically the lower the better, because thatÂ’s where theyÂ’re going to be on the road, so thereÂ’s less to reflect off of in fog or rain,” Kucera explained. “If you get them up at a certain height, theyÂ’re going to be reflecting certain things like snow, rain or things like that in your eyes.” 2024 GMC Sierra EV Denali Edition 1 View 13 Photos Of course, youÂ’ll notice on the Sierra EV that the daytime running lights (DRLs) are still big and bold in the upper part of the front end. These lights are around for decor, though, and act as pieces of design rather than a functional way to see at night. In other words, theyÂ’re lights, but theyÂ’re not going to dazzle oncoming traffic or cause glare for the driver like a headlight pointed down the road will.  Moving those lights further down in the front should hopefully be a net positive for other drivers coming across the Sierra EV and for drivers of the truck themselves. How the lights are aimed plays just as much a role in how other drivers perceive oncoming lights, though, so weÂ’ll have to wait and see the real-world performance on this one.  WeÂ’ll also note that moving the actual headlights further down the front end doesnÂ’t take anything away from the design of the Sierra EV. It still features a strong, upright stance that the world is accustomed to seeing from new trucks these days. ItÂ’s no surprise, but GM agrees.

2021 GMC Canyon trims overhauled, SL and SLT disappear

Until this year, the GMC Canyon has offered six trims in two drivetrains: SL, a base model simply called Canyon, SLE, All Terrain, SLT, and Denali, with all but the SL available in either 2WD or 4WD. GM Authority credits "dealer sources" for news that the 2021 Canyon has had its trim steps overhauled. According to the chart in the report, the SL and SLT are no more, the base Canyon gets replaced by a trim called Elevation Standard, and SLE turns into Elevation. We already know that All Terrain has given way to AT4, while Denali remains in the top spot. Trim content doesn't change with the names, but there's no equivalent for the SLT trim in terms of spec. The GMC site lists the 2020 SLE and SLT on the same page, and a shopper must burrow into the spec comparison page to figure out the differences. The SLT only comes with the 3.6-liter V6 and eight-speed transmission, and makes features like remote start, climate control, heated mirrors, heated seats, hitch guidance, and a spare tire standard equipment. It also chromes the exterior door handles, and offers a Cocoa/Dune leather interior that can't be had on the SLE. It's possible the SLT's $4,700 premium over the SLE led more buyers to start with the SLE and add the engine and options they wanted.   We have a number of questions that we'll need to wait for GMC's official announcement to answer. The 2020 Canyon offers an Elevation Edition package for $650 that adds a black grille with body-colored surround, and 18-inch Satin Graphite wheels in all-terrain rubber. There's also a California Elevation Special Edition for $1,195 with all-weather floor liners, assist steps, and mud flaps. They could be optioned on the SLE but not the SLT. With the addition of two Elevation trims, we'll find out if the packages get renamed or go away. Separately, CarBuzz spotted a 2021 GM Fleet Order Guide that mentions a leveling kit option, LPO Code SQS, for the Canyon and the Chevrolet Colorado. We noted the inclusion of a leveling kit in the coming Canyon AT4 Off-Road Performance Package. According to the order guide, the option can be ordered only for the Canyon AT4 trim, but it's not clear if that's an a la carte choice or if buyers must order the Off-Road Performance Package. On the Chevy, the rake-removal equipment can be had with the Colorado 4x2 Z71 or the 4x4 Work Truck, LT, and Z71. Related Video:

GM recalling over 243,000 crossovers over possible seat belt defect

2010 Buick Enclave - Click above for high-res image gallery
The summer of 2010's recall hit parade continues unabated today, with General Motors having just announced that it is asking 243,403 owners of its 2009-2010 Lambda crossovers to bring their three-row haulers in for inspection. The culprit? Second-row seat belts in select Buick Enclave, Chevrolet Traverse, GMC Acadia, and Saturn Outlook CUVs have "failed to perform properly in a crash."
According to GM, a second-row seat-side trim piece is to blame, as it can impede the upward rotation of the buckle after the seat is folded flat. As a result, if the buckle makes contact with the seat frame, cosmetic damage can occur, potentially requiring additional force to operate the buckle properly. So far, no great shakes, but in the process of applying that additional force, the occupant may push the buckle cover down to the strap, potentially revealing and depressing the red release button. As a result of this, the belt may not latch, or in certain cases, it may actually appear to be latched when, in fact, it isn't.