1977 Gmc 3/4ton Pickup Truck, Not Running, No Reserve Has 454 V8 on 2040-cars

Auto blog

GM taps Honeywell's Quality Control System for Ultium battery plant

The Chevrolet Bolt recall has been so frustrating for General Motors that the automaker made an unexpected show of public hopelessness in saying it was "not confident" that LG — which produces the Bolt's batteries — could produce batteries without defects. Even though the remark came before investigation teams founds the source of the Bolt battery issue, it was even more strange considering GM and LG are still in bed together, the two having invested more than $2.3 billion in a 2.8-million-square-foot plant to make GM's Ultium batteries in Lordstown, Ohio. Now that GM has even more motivation to keep its Ultium batteries free of scandal, GM has tapped Honeywell for that company's Quality Control System at the Lordstown facility. The Honeywell QCS will monitor four of the production lines at the facility using "high-precision scanners and basis weight sensors." One of the parameters measured will be electrode coat weight, a key stat in battery performance. Another measurement and control company wrote, "Improving the electrode coating process is a significant part of the equation to delivering better quality and better performing cells – and coating uniformity is seen more and more as a critical requirement." Honeywell says it has more than 20 years of experience with lithium-ion technology, and the firm is already found throughout the green economy. A GM spokesman made sure to say that "the awarding of the Ultium contract to Honeywell has nothing to do with the Bolt recall." Yet in the Honeywell press release, a company director spoke words that could have come straight from GM, with, "Given the opportunity at hand, battery manufacturers such as Ultium Cells must be able to bring new solutions to market with confidence." The new Lordstown facility is scheduled to open in the first quarter of next year. It will employ more than 1,100 workers building the prime movers for coming EVs like the new Hummer and the Cadillaq Lyriq. Ideally, before then, GM will have found and fixed all of the Bolts with issues, and can begin its Ultium era under sunny skies. The automaker started accepting LG batteries again last week, the new batteries should begin reaching dealers around the same time Bolt production resumes on October 11. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Green GMC Safety Technology Electric

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.