2014 Gmc Sierra 1500 Slt on 2040-cars

Auto blog

2024 GMC Sierra HD unveiled with new design and more powerful turbodiesel V8

The 2024 Chevrolet Silverado HD made its debut in September 2022, so it was only a matter of time before the GMC Sierra HD received a similar round of updates. Unveiled online, the truck gains a new-look design and a more powerful turbodiesel V8, among other changes. GMC developed the Sierra HD primarily for towing and hauling so the most significant changes are found under the hood. The available 6.6-liter turbodiesel Duramax V8 engine now develops 470 horsepower at 2,800 rpm and 975 pound-feet of torque at 1,600 rpm, figures that represent increases of 25 and 65, respectively, over the 2023 model and that match the 2024 Silverado HD's. GMC notes it increased low-end torque by about 25% by fitting a new turbocharger. The V8 spins the rear or the four wheels via a 10-speed automatic transmission.  On the gasoline side of the spectrum, the 6.6-liter V8's output stays flat at 401 horsepower and 464 pound-feet of torque. It's now bolted to a 10-speed automatic transmission, and replacing the 2023 truck's six-speed lets the engine run closer to its peak power for longer periods. Here again, rear-wheel-drive comes standard and a part-time four-wheel-drive system is available across the entire line-up. Properly equipped, the 2024 Sierra 2500 HD Crew Cab can tow up to 21,900 pounds. The standard 2500 HD's towing capacity checks in at 22,500 pounds (a 4,000-pound improvement), and the 3500 HD is capable of towing up to 36,000 pounds — that's nearly 13 Subaru BRZs. Buyers have a dizzying selection of trim levels and body styles to choose from. The range includes Regular, Extended, and Crew cabs as well as seven trim levels called Pro, SLE, SLT, AT4, AT4X, Denali, and Denali Ultimate, respectively. The AT4X variant will not be available at launch, and the Denali Ultimate is new for the 2024 model year. Additionally, 3500 HD models can be ordered with dual rear wheels. What the truck looks like depends on the trim level. Broadly speaking, designers drew a more angular front end with a new-look grille, sharper-looking lights, and a redesigned bumper. New wheels are part of the update as well; the 3500 HD dually gets 18-inch polished aluminum wheels, and 22-inch units are optional on single-rear-wheel trucks. Finally, the color palette grows with six optional shades called Titanium Rush Metallic, Sterling Metallic, Volcanic Red Tintcoat, Redwood Metallic, Meteorite Metallic, and Downpour Metallic, respectively.

2014 Chevrolet Silverado tows in new configurator, microsite

Judging by your continued enthusiastic response to configurator notices, dear reader, you enjoy speccing out new cars as much as we do. Better still, there tends to be even more ways to personalize, configure and bloat theoretical MSRPs on full-size trucks as there are with more ordinary passenger cars. In addition to trim level, engine and transmission choices, truck buyers usually have to specify items like cab configuration, bed length, number of driven axles, tow packages, gear ratios and all sorts of bits and bobs.
That's why we're pleased to see the DIY specification utility for the 2014 Chevrolet Silverado come alive so soon after this week's Detroit Auto Show debut. While the configurator lacks pricing (General Motors hasn't announced numbers yet) and full options, you can still spec out your half-ton rig, and even print it out or email it to your friends. Beyond the configurator, the new model-specific site is pretty cool, too, with various videos and closer looks at the truck's new features.
The new Chevrolet pickup range won't be on dealer lots until sometime this summer, so whether you're a building contractor, an avid sportsman or just a guy or gal that loves full-size trucks, you might want to check out the link below to keep your appetite whetted. If you're more of a Sierra fan, well, it looks like you're going to have to wait a while - GMC hasn't updated its site yet.

2019 GMC Sierra Denali MultiPro tailgate and CarbonPro bed explained

When the 2019 Chevy Silverado debuted at the Detroit Auto Show in January, GM's Mark Reuss promised that the new 2019 GMC Sierra would have some significantly different styling and features than its corporate sibling. Previously, the Sierra has been little more than a Silverado with new front and rear fascias and some extra chrome inside and out. Well, Reuss was right. In addition to new sheetmetal, the Sierra exclusively gets the slick MultiPro tailgate and CarbonPro carbon-fiber bed box The tailgate really is trick. At the debut, GMC had multiple demonstrations, with engineers walking us through all six different configurations. Like all Sierra tailgates, the MultiPro version uses an aluminum skin to reduce weight. It's easy to tell which tailgate is which, as the MultiPro has a distinct cutout in the middle where it can fold down or extend. It can be used to extend the bed, drop to allow easier access, provide a sort of workbench, or be used as a step to help get into the bed. Yes, there's even a handle. Ford who? The step itself can support up to 375 pounds, 75 pounds more than Ford's similar tailgate step. This tailgate really is unique to the Sierra and is standard on SLT and Denali models. That said, the power-operated tailgate from the Silverado won't be coming to the GMC. Chevy gets its own exclusive, too. The Sierra's other big exclusive is the carbon-fiber reinforced plastic bed box. CFRP replaces steel inside the bed though not on the fenders. The bed uses four pieces; one for the bottom, one in the back and two along the sides. This isn't a CFRP. There is no steel hiding underneath these panels. Just take a peek underneath. The bed is a composite that uses 1-inch carbon-fiber threads, not a weave. Sheets of CFRP are molded and quenched — a process where the plastic coagulates and solidifies, locking in the carbon fiber — in just 60 seconds. That allows GMC's supplier to crank out these much more quickly. The finish looks like black fiberglass, though an engineer said that this wasn't the final production version. The final model will have different textures in order to improve grip and keep things from sliding around. GMC is touting the material's dent and corrosion resistance, though it remains to be seen how well it holds up to cracking. A video at the reveal showed people going after it with hammers and cinder blocks, but in-person demonstrations weren't available.