2007 Gmc Sierra 1500 Classic Wt Standard Cab Pickup 2-door 5.3l on 2040-cars

Auto blog

2021 GMC Canyon gets AT4 trim and a 'more upmarket' Denali

The AT4 train continues at GMC, with the 2021 Canyon AT4 climbing to altitude in Vail, Colorado, to announce its arrival. The off-road package, teased during the Sierra HD launch last year and already rolled out on the Sierra and Acadia, replaces the Canyon All Terrain trim. The rectangular grille goes away, the new rig picking up a larger, Sierra-like grille with a dark chrome surround and vertically-oriented fog lights. And because nothing says off-road badass like red recovery hooks, of course there's a pair peeking out from under the tweaked lower bumper. Otherwise, all the All Terrain kit carries over, like the tuned suspension with Advanced Hill Descent Control, transfer case skid plate, automatic locking rear differential, and 31-inch Goodyear Wrangler DuraTrac® tires on 17-inch aluminum wheels. Inside, the headrests are embroidered with AT4 logos, and Kalahari stitching is exclusive to this trim. GMC also announced a more polished Denali trim, without providing any photos. The coming pickup adopts a grille with a "more sculpted and layered pattern," plus five-inch chrome assist steps, and 20-inch Diamond Cut aluminum wheels that we'll assume come in a different pattern than the current 20-inch Diamond Cut aluminum wheels. The cabin goes upscale with open-pore ash wood trim and aluminum trim, a new Cocoa/Dark Atmosphere color theme, and unique stitching. Both the AT4 and Denali offer the same two engine choices. There's either the 3.6-liter V6 throwing out 308 horsepower and 275 pound-feet of torque, shifting through an eight-speed automatic, or the 2.8-liter Duramax diesel producing 181 hp and 369 lb-ft, shifting through a six-speed auto. The 2021 trucks will be available later this year, pricing to be announced closer to the on-sale date. The 2020 Canyon All Terrain starts at $37,695, the 2020 Canyon Denali starts at $41,595. Featured Gallery 2021 GMC Canyon AT4 View 11 Photos Related Gallery 2021 GMC Canyon AT4 View 11 Photos GMC Truck Luxury Off-Road Vehicles

Next-gen GMC Canyon spied with big screen and heavy camo

The next generation of midsize GM pickups is well on its way to being ready, and these new spy shots give us an early look at the new interior inside the GMC Canyon. To our delight, the new Canyon interior doesn’t even remotely resemble the current truck. The relationship between the refreshed SierraÂ’s new interior and what we can see in these Canyon spy shots is impossible to ignore. While itÂ’s not an exact replica of, or a shrunken version of, the CanyonÂ’s screen hardware looks similar to the SierraÂ’s. We can see the volume knob sprouting out of the top left corner, and the whole screen is surrounded by shiny black plastic. The software itÂ’s running is GMÂ’s new Android Automotive-based infotainment that weÂ’ve already sampled in the 2022 Yukon. Just like in that vehicle, we can see that Google Maps is the native navigation system, and it features similar shortcuts on the left-hand side of the screen. Below the screen, the next-gen Canyon features all of its climate controls. The model weÂ’re looking at here must be an upmarket trim, because itÂ’s featuring heated and cooled seats. Another indication that this model could be a Denali (or other higher trim) is the small piece of wood trim on the door that is mostly shrouded by camouflage. We canÂ’t make it out all that well, but any amount of wood trim in a midsize pickup means luxury.  ItÂ’s difficult to make out whatÂ’s going on with the steering wheel, though we can see what appear to be silver switches flanked by flat black buttons. The instrument cluster is similarly difficult to see, but if the little glimpse of a “125 miles to empty” readout is any indication, it could very well be a totally digital cluster. WeÂ’ll need to wait to fully confirm that thought, though. When it comes to the exterior, there isnÂ’t a whole lot to see under the heavy camouflage. We have a reasonable look at the grille behind the mesh, and the front LED lighting signature is partially visible, too. WeÂ’ll note that there isnÂ’t much of a front bumper on this test truck, which is giving it the appearance of being an off-road capable pickup — itÂ’s just nowhere near as extreme as the Canyon prototype we spied last year sporting a ZR2-style suspension.  Big wheels fitted to this tester gives more credence to it possibly being a Denali. The rear is perhaps even more covered up than the front, making it even more difficult to see what GM is hiding.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.