2004 Gmc Sierra Z71 4x4 on 2040-cars

Auto blog

2019 GMC Sierra AT4 First Drive Review | Off-road overkill

The road ahead is dirt with a rut here and a rock there. Brush keeps a respectable distance on the right side, the edge on the left gradually falls away into the valley below. The grade is nothing your treadmill couldn't duplicate and traction is pretty good. Honestly, a couple in their Subaru Crosstrek could pop up here for a picnic. The 2019 GMC Sierra AT4 we're driving is therefore complete overkill. But at least it looks the part as it trudges up this uncharacteristically verdant mountain with San Diego in the distance to the north and Mexico to the south. Its special, dechromed AT4 grille has a purposeful appearance, but tastefully lacks the show-off machismo of Ford and Ram's off-roading models. The red tow hooks are a nice touch and the dark-accented 20-inch wheels wrapped in all-terrain rubber are just the right size beneath a suspension that is raised an extra 2 inches from every other Sierra. That would be one of the key elements that differentiates the AT4 as the Sierra's off-roading model – GMC's answer to the Chevy Silverado's Trail Boss trims. In fact, their mechanical enhancements are identical. Besides the 2-inch lift, the suspension features off-road-tuned Rancho monotube shocks. There's also a locking rear differential, a two-speed transfer case, skid plates and those tow hooks. The 5.3-liter V8 with Dynamic Fuel Management is similarly standard, but unlike the Silverado Trail Boss, the Sierra AT4 offers the 6.2-liter V8 good for 420 horsepower and 460 pound-feet of torque as a roughly $2,500 option. That's the engine we have and it delivers the expected punch, complete with a satisfyingly snarling exhaust note. However, as observed in back-to-back drives with these two available engines during the Silverado launch, the 6.2 certainly isn't necessary. The 5.3-liter is seriously capable and the bigger engine is largely for those who want to have the biggest number possible emblazoned on the fender. It's overkill, which in this particular environment, is fitting. Besides the available engine upgrade, the AT4 also goes beyond its Trail Boss counterpart by dipping into the Sierra Denali's tool box. Its MultiPro tailgate is standard equipment, allowing for six different configurations, the most notable of which include a means of more easily reaching into the bed and a drop-down step that eases entry into the bed. GMC's considerable touting of that last element is rife with hypocrisy given GM advertisements that mocked Ford's similar feature.

Next-gen GMC Canyon spied with big screen and heavy camo

The next generation of midsize GM pickups is well on its way to being ready, and these new spy shots give us an early look at the new interior inside the GMC Canyon. To our delight, the new Canyon interior doesn’t even remotely resemble the current truck. The relationship between the refreshed SierraÂ’s new interior and what we can see in these Canyon spy shots is impossible to ignore. While itÂ’s not an exact replica of, or a shrunken version of, the CanyonÂ’s screen hardware looks similar to the SierraÂ’s. We can see the volume knob sprouting out of the top left corner, and the whole screen is surrounded by shiny black plastic. The software itÂ’s running is GMÂ’s new Android Automotive-based infotainment that weÂ’ve already sampled in the 2022 Yukon. Just like in that vehicle, we can see that Google Maps is the native navigation system, and it features similar shortcuts on the left-hand side of the screen. Below the screen, the next-gen Canyon features all of its climate controls. The model weÂ’re looking at here must be an upmarket trim, because itÂ’s featuring heated and cooled seats. Another indication that this model could be a Denali (or other higher trim) is the small piece of wood trim on the door that is mostly shrouded by camouflage. We canÂ’t make it out all that well, but any amount of wood trim in a midsize pickup means luxury.  ItÂ’s difficult to make out whatÂ’s going on with the steering wheel, though we can see what appear to be silver switches flanked by flat black buttons. The instrument cluster is similarly difficult to see, but if the little glimpse of a “125 miles to empty” readout is any indication, it could very well be a totally digital cluster. WeÂ’ll need to wait to fully confirm that thought, though. When it comes to the exterior, there isnÂ’t a whole lot to see under the heavy camouflage. We have a reasonable look at the grille behind the mesh, and the front LED lighting signature is partially visible, too. WeÂ’ll note that there isnÂ’t much of a front bumper on this test truck, which is giving it the appearance of being an off-road capable pickup — itÂ’s just nowhere near as extreme as the Canyon prototype we spied last year sporting a ZR2-style suspension.  Big wheels fitted to this tester gives more credence to it possibly being a Denali. The rear is perhaps even more covered up than the front, making it even more difficult to see what GM is hiding.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.