Fwd 4dr Denali New Suv Automatic Gasoline 3.6l V6 Cyl Iridium Met on 2040-cars

Auto blog

Pics Aplenty: Meet the 2014 Chevrolet Silverado and GMC Sierra [w/poll]

Today was a pretty big day for General Motors, debuting the all-new Chevrolet Silverado and GMC Sierra light-duty pickup trucks ahead of their official showcase at the 2013 Detroit Auto Show. And now that the dust has settled at GM's big reveal event, we've had a chance to snap dozens of photos of the new pickup pair from every angle.
We already told you the important bits earlier today (click here in case you missed it), but let's recap. Under the hood are three new engines - a 4.3-liter V6, 5.3-liter V8 and 6.2-liter V8 (you know, a version of the small-block that'll also be found under the hood of the C7 Corvette), all mated to six-speed automatic transmissions. The 2014 model year marks the return of the Z71 off-road package with Rancho shocks, front tow hooks and beefier underbody protection. Inside, there's a host of new technology and a greater focus on better quality and refinement.
Some of the nitty-gritty specifics (like engine output numbers and fuel economy) have yet to be revealed, and since we haven't driven the finished products yet, it's hard to say how these trucks will fare against rivals like the Ram 1500 and Ford F-150. For now, we can only judge these two books by their covers, and while we do like the designs of the new trucks, we Autoblog staffers are torn on exactly which one looks best.

2019 GMC Sierra Denali Drivers' Notes Review | Half measures

Associate Editor Reese Counts: This truck feels a full generation behind the competition. It's a half measure that feels more like a mid-cycle refresh than a whole new truck. There are a few high points: the 6.2-liter V8 is great (if thirsty) and the bed is wider than anything else in the class. The tailgate, too, is nifty, though some might write it off as a novelty. I also dig the tech, particularly the infotainment system and heads-up display. Ram might brag about its giant touchscreen, but I think I actually prefer the GMC's user interface. The rest can be summed up with a series of shoulder shrugs. The Sierra finally looks different than a Silverado, but I wouldn't call it handsome. The interior is spacious, but I'd knock the design and materials in a $45,000 truck, much less one approaching $70,000. It's not Toyota Tundra levels of terrible, it's just plain, cheap, and not nearly as space efficient as the Ram. It feels like GM's not even trying to move the needle with this truck. The more time I spend behind the wheel, the less I like it. Assistant Editor Zac Palmer: I got to spend a lot of seat time in this 2019 GMC Sierra Denali, and I came away generally unenthused by GM's most luxurious truck. We harp a lot about how expensive pickup trucks are these days, and this one's near $70,000 price tag is just the same. When you step inside a similarly-specced Ram, it feels like it's worth its price. When I step out of a Silverado and into a more expensive Sierra, I want to feel like it's money well spent. This Sierra Denali does not. Beyond the leather seats and a few small pieces of wood trim, it's hard, black plastic galore. What makes it all the more frustrating is that GM has most of the tech and features it needs (solid infotainment, 360-degree camera, wireless phone charging and the rear camera mirror is genuinely awesome). The presentation just comes off as dated from the start. It's a shame, because I have a strange affinity for how this truck looks from the curb. The sharp angles, brash styling and "tough truck" attitude is appealing to me. I like stomping on the gas and letting the 6.2-liter torque monster under the hood loose. But man do you pay the price for using that engine. Over a few hundred miles of driving I ended at a dismal 15 mpg reading on the trip computer — the saddest part of this was knowing these were mostly highway miles.

Chevy's 6.6-liter Duramax is pretty much all new

To say there's a heated battle in heavy-duty pickups is an understatement, with Chevrolet, Ford, and Ram constantly trading blows of increased torque, horsepower, and towing capacity. The latest salvo is the revised, more powerful turbo diesel 6.6-liter Duramax V8 in the 2017 Chevy Silverado. It has 910 pound-feet of torque, an increase of 145, putting it nearly level with the Ford Super Duty. Here's a closer look at where those gains come from. How exactly did Chevrolet add all that torque plus 48 horsepower? The automaker essentially took a fine-tooth comb to the entire engine. Chevy says it changed 90 percent of the V8, and the cumulative effect of those small changes adds up to big increases. As you might guess, the turbocharger is updated. The larger unit features electric actuation of the variable nozzle turbine (VNT), and what Chevy calls a double axle cartridge mechanism that separates the VNT moving parts from the housing. That helps with heat performance as well, with a claim that the exhaust side of the turbo can run continuously up to 1,436 degrees Fahrenheit. Helping that cause are six exhaust gaskets made of Inconel - an nickel alloy that contains chromium and iron – and upgraded stainless steel for the exhaust manifold. Despite having the same cast iron cylinder block, albeit with some minor enhancements, the engine has new cylinder heads, pistons, piston pins, connecting rods, and crankshaft, which have all been upgraded to handle 20 percent higher cylinder pressures. Alongside the increase in pressure, Chevrolet also increased the cylinder head's structure with a honeycomb design. The pattern features high-strength aluminum with dual layer water jackets that not only improve strength, but also optimize water flow for better cooling. For 2017, the cylinder head also benefits from integrated plenum that aids the engine in getting more air under heavy loads. The cylinder head isn't the only component to get a minor update, as the pistons have a larger diameter pin for improved oil flow. The same detailed improvements has been bestowed to the humble connecting rods (second in our hearts only to the inanimate carbon rod). The new design has the bolts oriented roughly 45-degrees to the rod instead of parallel. The angle split design, as it's called allows for easier passage through the cylinder.