2011 Gmc Acadia Fwd 4dr Denali, Loaded, Navigation, Leather, Sunroof. on 2040-cars

Auto blog

Should heavy-duty pickup trucks have window stickers with fuel mileage estimates?

If you were to stroll into your nearest Chevrolet, Ford, GMC, Nissan, or Ram dealership, you'd find a bunch of pickup trucks. Most of those would have proper window stickers labeled with things like base prices, options prices, location of manufacture, and, crucially, fuel economy estimates. But you'd also run across a number of heavy-duty trucks with no such fuel mileage data from the Environmental Protection Agency. The EPA doesn't require automakers to publish the valuable miles-per-gallon measurement for vehicles with gross weight ratings that exceed 8,500 pounds. That makes it difficult for consumers to compare behemoths powered by turbocharged diesel engines – between one another, and between smaller, gasoline-fueled trucks. Consumer Reports doesn't think it should be this way, and it's spearheading an effort (PDF link) to get the government to require manufacturers to publish fuel economy estimates. In its own testing, CR found that heavy-duty pickups powered by Ford's Power Stroke, GM's Duramax, and FCA's Cummins diesel engines (which doesn't include the Ram's EcoDiesel) get worse fuel mileage than their lighter-duty gas-powered siblings. We're not so sure HD-truck buyers are unaware of this fact – big diesels don't really come into their own until big loads are placed in their beds or attached to their trailer hitches. Under heavy workloads, the diesel trucks will almost certainly return greater efficiency than a similar gas-powered truck. What's more, HD trucks with lumbering diesels in general make the driver feel more confident while towing due to greater torque at low engine RPM than gas trucks. They also offer greater max-weight limits. Still, we agree EPA fuel mileage estimates should be offered for heavy-duty pickups. And we think the comparisons provided by Consumer Reports might be interesting to potential buyers. Click here to see the results of CR's tests, and let us know what you think using the poll below. Related Video: Featured Gallery 2017 Ford F-Series Super Duty: First Drive View 22 Photos News Source: Consumer Reports Government/Legal Green Read This Chevrolet Ford GMC Nissan RAM Fuel Efficiency Truck Commercial Vehicles Diesel Vehicles poll gmc sierra hd chevy silverado hd

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

2019 GMC Sierra CarbonPro Edition pricing starts above $65,000

GMC is hard at work building carbon fiber beds for its CarbonPro trucks, so it's fitting that the company has finally released pricing for the 2019 GMC Sierra CarbonPro Edition. It's not cheap by any measure. The most "affordable" for 2019 is the AT4 version starting at $66,635. It's also available in Denali trim, and that version starts at $70,020. Both represent an increase of $8,000 to $9,000 more over the base AT4 and Denali models. That may seem like a lot to go from a steel bed to a carbon fiber one, but you're getting more than the bed for that money. GMC also includes unique badging, a Bluetooth bed speaker, rear-camera mirror, surround vision cameras, automatic emergency braking, lane-keep assist, automatic headlights, power side steps, a sunroof, trailer tire pressure monitoring and a color heads-up display to both models. The AT4 specifically gets a Bose sound system, navigation, parking sensors and a cat-back exhaust, too. The Denali adds unique 22-inch wheels. Both only come with the 6.2-liter V8 and 10-speed automatic. To equip a regular GMC Sierra AT4 similarly to the CarbonPro Edition, the price comes out to $64,110. The Denali comparably equipped to the CarbonPro is $67,940. So the bed itself is about $2,000 to $3,000. The 2019 GMC Sierra CarbonPro Edition trucks should be reaching dealers very soon. They will soon be supplanted by the 2020 version, which will add the new 3.0-liter diesel inline-six as an engine option. The AT4 CarbonPro will get some extra black accents for 2020, too.