1998 Ford Taurus Lx Sedan 4-door 3.0l on 2040-cars

Auto blog

Tier 1 suppliers call GM the worst OEM to work with

Among automakers with a big US presence, General Motors is the worst to work for, according to a new survey from Tier 1 automotive suppliers, conducted by Planning Perspectives, Inc.
The Detroit-based manufacturer, which has been under fire following the ignition switch recall and its accompanying scandal, finished behind six other automakers with big US manufacturing operations. Suppliers had issues with trust and communications, as well as intellectual property protection. GM was also the least likely to allow suppliers to raise their prices in the face of unexpected increases in material cost, all of which contributed to 55 percent of suppliers saying their relationship with GM was "poor to very poor."
GM's cross-town competitors didn't fare much better. Chrysler finished in fifth place, ahead of GM and behind Dearborn-based Ford, which was passed for third place this year by Nissan. Toyota took the top marks, while Honda captured second place.

Ford shows off V8-powered Ranger headed to Dakar Rally

Avert your eyes now if you're jealous that the global version of the Ford Ranger is not offered in the US. Ford's midsize pickup is being tuned up to take on the 2014 Dakar Rally, and the result is a truck that is probably even cooler than any F-150 SVT Raptor we've ever seen in the States. Ford is actually building two versions of the truck for Dakar, which will run from January 5 through January 18, covering more than 5,000 miles from Argentina to Chile.
Starting with a fully composite body and a 5.0-liter V8 plucked from a Mustang, nearly every aspect of the trucks have been purpose built to take on the grueling race. This includes things like the six-speed sequential gearbox, liquid-cooled rear brakes and the 132-gallon fuel tank. As proof that Dakar is more about endurance than speed, the engines used in these race trucks will be limited to around 350 horsepower and 413 pound-feet of torque, and will max out at a top speed of just 105 miles per hour. Scroll down for Ford's official press release offering more information about the trucks and teams being prepped for Dakar.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.