1940 Ford Other on 2040-cars

Auto blog

A cool boost to turbocharger performance

Since the advent of the forced-induction engine, we have been looking for ways to get every drop of performance we can. There are many approaches to getting additional power using better intercooling, water injection, or even adding nitrous oxide. One take on a short instant burst of power is being researched by Mahle and involves providing supercooled air to an engine, which allows it to burn a leaner fuel mixture and produce more power. The supercooling idea is not new and was examined by Ford in 1993 on the Mustang Mach III concept car, then brought up again in 2003 with the SVT F-150 Lightning concept. Ford called its system the SuperCooler; it was designed to work with any turbocharged or supercharged engine equipped with a water-to-air intercooler. The system on the Lightning concept used a small tank of antifreeze that was hooked up to the truck air conditioning compressor. The air conditioning compressor cooled the antifreeze down to about 30 degrees. The other side of the tank was hooked up to the air-to-water intercooler, which usually had a temperature over 100 degrees. Once the antifreeze was circulated from the tank into the intercooler, it would lower the intercooler temperature and provide for a cooler, denser air charge into the engine; the result was around 50 extra horsepower for a burst of about 30 seconds to a minute, depending on the size of the tank. The system for the Lightning was to be offered as a $750 option and would have been targeted towards drag racers and the like, as it could be used for a run down the drag strip and then re-cooled by the time the truck was back in line. The system was fairly non-intrusive – it only weighed about 25 pounds and did not require a new compressor or intercooler. But as with many concepts, it was ultimately scrapped. The technology was always stuck in the back of my mind, but with larger and more powerful engines being produced it could not find its place. With the advent of new fuel economy standards, we have seen small-displacement turbocharged engines pop up and they seem like the perfect candidate for this type of technology. Ford's EcoBoost 1.0-liter three-cylinder turbocharged engine, as used in the Fiesta and Focus, is one such candidate for this technology. It would add a negligent amount of weight but could provide a boost of 10 to 20 horsepower when needed, like merging onto the highway or catching up to traffic.

US Ford Focus RS to be imported from Europe

Rumors about the forthcoming Ford Focus RS are flourishing into what sounds like a very impressive new hot hatch. The latest scuttlebutt gives the first indication about when we might see a few of these fast Focuses on roads here in the US.
Unnamed insiders reportedly confirmed to The Truth About Cars that Ford plans to launch the Focus RS in the US in 2016. However, getting one might not be so easy - the boosted powertrain means the car would likely need to be imported from Europe. That's likely going to keep the total number available in the US rather low. The sources estimate a price tag that's a bit more expensive than the top Focus ST3, which starts around $28,500, plus $825 destination.
It seems that a pretty potent package comes for all of that cash, though. The Focus RS reportedly uses a 2.3-liter turbocharged four-cylinder making between 325 and 350 horsepower, with a torque-vectoring all-wheel drive system to get that muscle to the road. The test mules also wear more aggressive front and rear fascias, dual exhaust tips, larger brakes and sticky tires. It sounds like a great formula on top of the already enjoyable Focus ST.

Ford launches pair of recalls affecting fullsize sedans and Transit Connect van

Ford has announced a pair of pretty significant recalls affecting the 2010-2013 Ford Taurus and Police Interceptor, as well as their platform-mate, the Lincoln MKS. A separate recall covers the 2014 Transit Connect. The fullsize sedans include 205,000 vehicles built at Chicago Assembly over a variety of timeframes, ranging between December 1, 2009 and November 30, 2012. The vehicles, 194,889 of which were sold in the United States, have an issue with the spring controls on the interior door handles that could cause the door to open in a side-impact crash. The Transit Connect recall, meanwhile, includes 16,100 vans built between November 6, 2013 and September 20,2014 at the company's Valencia, Spain factory. In these vehicles, the seatbelt fasteners may not have been tightened properly, which could cause them to loosen over time, a condition that's obviously bad news in the event of a crash. Ford says it is not aware of any accidents, injuries or crashes in either recall. Owners will, of course, be notified and asked to report in for inspections and if necessary, free replacements. Scroll down for the full press release from Ford, which includes the complete breakdown of dates during which the affected sedans were built in Chicago. JAN 28, 2015 | DEARBORN, MICH. FORD ISSUES TWO SAFETY RECALLS Ford is issuing two safety recalls. No accidents or injuries are attributed to either of these conditions. Details are as follows: Ford issues safety recall for certain 2010-2013 Ford Taurus, Lincoln MKS and Ford Police Interceptor sedans for interior door handle issue Ford is issuing a safety recall for approximately 205,000 2010-2013 Ford Taurus, Lincoln MKS and Ford Police Interceptor sedans due to an issue with the spring that controls the interior door handles. If the spring is unseated, the door may become unlatched in a side-impact crash, increasing the risk of injury. Ford is not aware of any accidents or injuries related to this condition. Affected vehicles include certain 2010-2013 Ford Taurus vehicles built Dec. 1, 2009 to July 31, 2010 and Feb. 1, 2011 to Nov. 30, 2012 at Chicago Assembly Plant; certain 2010-2013 Lincoln MKS vehicles built June 2, 2011 to Oct. 31, 2011 at Chicago Assembly Plant; and certain 2010-2013 Ford Police Interceptor sedans built Dec. 1, 2009 to July 31, 2010 and Feb. 1, 2011 to Nov. 30, 2012 at Chicago Assembly Plant.