1967 Ford Mustang Fastback on 2040-cars
Phoenix, Arizona, United States
Starting with a '70 block, installed a 347 ci stroker steel crank with Eagle H-Beam rods and low, 8:1 Forged
pistons. It has a complete Trickflow top end with O-ringed Aluminum heads, intake, and cam (no, I do not have all
the specs). I have run this motor with several intake combinations and settled on the Trick Flow box style intake
for looks and top end power. I have not dynoed it with the current setup, but previous setups delivered 503 rwhp
with equal amount of boost. It also has full length headers with Spintech side exit mufflers. The fuel system is
upraded from the Stainless tank to the billet fuel rails to handle much more power.
Speaking of boost, it has a Vortech V-2 Supercharger set to pump about 7 lbs of boost. I have a pulley to run 13
lbs, and the motor is built for it, but it has never been installed.
It is running a Ford AOD (automatic overdrive) transmission built by Level 10 Transmissions in New Jersey. It has
all the beefed up internals and chromoly output shaft to handle over 600hp. It works fantastic.
Backing up all that is of course the 9" rear end with 3.73 gears.
This setup will deliver mid-11 second quarter mile times.
Custom Pro-car seats with back seat upholstered to match
Nice new black carpet and perfect headliner/door panels
All black
Roll bar with 4-point harnesses
Shelby wood steering wheel.
Full center console
Very nice Pioneer sound system with CD, Bluetooth, custom sub box with 2-10" Rockford Fosgate subs in the trunk
along with amps to power all the speakers.
Ford Mustang for Sale
1965 shelby ac cobra backdraft racing black out(US $18,850.00)
1973 ford mustang mach 1(US $11,700.00)
1969 ford mustang 428 cobra jet(US $12,025.00)
Ford: mustang 25th anniversary(US $16,600.00)
Ford: mustang base(US $19,600.00)
Ford: mustang(US $19,000.00)
Auto Services in Arizona
Vince`s Automotive Repair ★★★★★
Ultimate Imports ★★★★★
Tire & Auto Service Center ★★★★★
The Ding Doctor ★★★★★
Team Ramco ★★★★★
Stockton Hill Tire ★★★★★
Auto blog
Trump did talk to Bill Ford, but the Kentucky plant was never moving to Mexico
Fri, Nov 18 2016President-elect Donald J. Trump has been butting heads with Ford for a while now. A lot of it seems to stem from misunderstanding or misrepresenting facts about how the automaker currently does business and its plans for the future. After a sit-down with executive chairman Bill Ford Jr., the misunderstandings continue, but Trump has apparently convinced the company to make some changes. During his campaign, Trump claimed that Ford was going to fire US workers and move manufacturing to Mexico. That wasn't the case – yes, Ford planned to transfer Focus and C-Max production from Wayne, Michigan, to Cuautitlan, Mexico, but no, that wouldn't mean anyone losing their job. The Wayne plant will continue to operate, and likely busier than before, as it will be the home of the new Bronco and Ranger. So Ford CEO Mark Fields responded with the facts, and then chairman Bill Ford Jr. sat down with Trump over the summer. Things apparently weren't resolved to Trump's satisfaction, so he and Bill Ford spoke on the phone yesterday as he claims in this tweet: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Let's pick that apart. First off, it's not a Lincoln plant, per se – the Louisville Assembly Plant currently builds the Ford Escape and Lincoln MKC, two small crossovers that share a platform. Ford was considering moving MKC production out of Kentucky to Mexico, but it would not have resulted in many lost jobs if any – the union had already agreed to moving the MKC in 2015 negotiations, and taking production of the slow-selling Lincoln out of the plant would open up capacity for more Fords. Be that as it may, Ford has decided not to move MKC production out of the plant, either for political reasons of placation or because it didn't make the greatest deal of business sense, maybe a combination of the two. That means Trump isn't really saving any American jobs in the short term. If anything, this move could keep Ford supply-constrained and result in reduced sales, which in turn brings the company less money and affects the bottom line and all employees. But that's speculation, so we won't tweet it. There is of course the possibility that Ford will be convinced, either by sheer will or by a more attractive trade situation, to invest in increased US production, which could bear fruit later on. We are told by Ford that the two men did in fact speak yesterday.
2015 Ford F-150 [w/videos]
Thu, 02 Oct 2014To learn more about the all-new 2015 F-150 and get an early read on its potential hero-or-zero status, we flew to the heart of full-size pickup truck country, San Antonio, TX, to spend a day driving, towing and playing in the mud with an assortment of Ford's innovative new trucks.
First, a caveat - while we feel we have a reasonably good handle on the new F-150 after attending this first-drive event, we are far from ready to pass definitive judgment on the success of this radically new rig. Our time in the various models was lamentably limited and we felt rushed. With so much at stake and with so much to talk about and experience, we had zero alone time with the vehicle - there were Ford folks shadowing us at every moment.
And we still don't know everything there is to know about the trucks, as Ford is withholding some of its most crucial numbers, including curb weight data and anticipated EPA fuel economy figures. We don't even have a firm on-sale date. All of this information is typically disclosed - or at least officially estimated - at the time of a new vehicle's first drive. This limits the scope of the judgments we feel comfortable making based on our first encounter.
Ford forced to recall Escape over fire risk yet again
Tue, 26 Nov 2013Recalls happen. Automakers hope they won't, but they do. And that's alright, for the most part, because cars are designed (and to a large degree still made) by humans, and humans make mistakes. So we forgive them, as long as the problem is resolved. Only in the case of the Ford Escape, the problem seems to keep coming back.
That's why Ford is calling in the Escape yet again due to fire concerns. The issue revolves around problematic fuel lines in 9,469 units manufactured between October 5, 2011, and July 11, 2012, all of which use the 1.6-liter EcoBoost inline four-cylinder engine.
As you yourself may recall, the Escape was subject to a string of recalls last year that resulted in a $17 million fine. One of them was over this very same issue, which Ford apparently didn't rectify the first time around. Let's hope this time is the last time.


