Full Custom-built Roadster, Removable Hardtop, 4 Wheel Disc, 350 Ci!!! on 2040-cars

Auto blog

Hybrid, electric campers take center stage at Germany's motorhome trade show

Car companies from all over the automotive spectrum will make international headlines next week by presenting hybrid and electric cars at the biennial Frankfurt auto show. Camper van and motorhome manufacturers got a head start on the rest of the industry by presenting their green solutions at the Dusseldorf Caravan Salon. The show confirms electrification is present in the leisure segment, too. German camper experts Dethleffs introduced a plug-in hybrid, pop-top camper based on the full-size Ford Transit van. Called Globevan e.Hybrid, it relies on a 126-horsepower drivetrain built around a turbocharged, 1.0-liter EcoBoost three-cylinder engine. The system can power the camper on electricity alone for up to 31 miles. Adventurers who leave with a full tank and a full charge enjoy 310 miles of driving range, which is an impressive figure for the camper van segment. Charging the battery pack takes 5.5 hours when using a regular household outlet, according to the manufacturer, or three hours when hooking it up to a quick-charging station. Globevan production is tentatively scheduled to begin in 2020, and pricing starts at 75,000 euros, a sum that represents approximately $83,000. EFA-S took electrification a step further. Starting with a Fiat Ducato, a van known as the Ram Promaster in the United States, it yanked out the turbodiesel engine and replaced it with a 140-kilowatt electric motor fed by an 86-kilowatt-hour lithium-ion battery pack. The company pegs the camper's driving range at up to 186 miles, a relatively low figure which hardly reflects how most vacationers use their van. The pack takes four hours to charge, Auto Motor und Sport learned. While sustainable, zero-emissions tourism is difficult to argue against, the Ducato-based camper suffers from two serious setbacks. First, the battery pack makes it so heavy that it can't be driven with a regular license. It's considered a heavy commercial vehicle. Second, its 160,000-euro (about $177,000) price tag makes it twice as expensive as a diesel-burning model, and puts it in the same price range as much bigger, more powerful, and more luxurious models. EFA-S will nonetheless move forward with production in 2020, though it plans to build no more than 30 units. The caravan Salon is not only about hybrids and electric cars, however.

2015 Ford Mustang renders reveal look of the real thing

This is, according to the pony-car obsessed kids over at Mustang6G.com, the closest, most accurate rendering of the new, 2015 Ford Mustang to date. Artis Chazcron used a combination of Ford CAD images and information from assorted spy shots to assemble a fairly handsome car, albeit one that conforms to the tired cliché of being more evolutionary than revolutionary.
Now, it's very important to note that these are still speculative renders, and that they only represent the base car - that could explain the lack of the Mustang's vestigial side scoops, along with other, newer styling cues that Mustang6G seems to think will arrive on production models. Those items include a new, double-bubble roof, although the Mustang aficionados claim that even if it were present, it'd barely be visible from these angles.
The front end is pretty spot on, compared to what we've seen from earlier spy shots, while the tail, with its interesting light design is something new. The louvered taillights look quite different from the current version, obviously, though Mustang has gone the whimsical route with taillights before. Also, note the new rear diffuser uses an integrated reverse light and rear foglight, the latter of which is required for sale in Europe.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.