23 Ford T Bucket on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Ford rakes in record $2.5b profit during Q1 of 2016

Fears that the auto industry is due for a downturn may be fading. Ford posted record profits in the first quarter of 2016, the company announced Thursday. Chief financial officer Bob Shanks said Ford enjoyed its best quarterly performance in history, generating operating profits of $3.8 billion and a record profit margin of 9.8 percent. Overall, the company's $2.5 billion profit in the quarter more than doubled from the 2015 quarterly results. "The first quarter was an absolutely terrific start to the year, an all-time record for the company, with very strong performance across the business," said chief executive officer Mark Fields. "We're excited about our future and confident in our ability to deliver long-term growth and profitability as we expand our business model to be both an auto and a mobility company." During the quarter, Ford announced the creation of Ford Smart Mobility, a new subsidiary that would vet future mobility projects in the realm of car-sharing, fractional ownership and autonomous deployment. The company also kicked off a billion-dollar makeover of its Dearborn, Michigan campus and headquarters. The company's after-tax earnings of $0.68 per share trumped Wall Street's expectations, and were significantly up from $0.39 per share a year ago. The results were buoyed by the company's fourth consecutive quarter of growth in Europe, which comes after a long period of stagnant sales. Ford's earnings results come amid reports that April car sales are on pace to jump 4 percent year over year, which would make it the best-selling April in history. Kelley Blue Book projects that car sales will reach 1.51 million this month, placing the industry on track for 17.5 million vehicles sold in 2016. Even as SUV and crossover sales drive the market, analysts say Nissan and Honda are positioned to benefit from renewed interest in mid-size cars. "Following a disappointing March, we expect sales to get back on track in April with SAAR in the mid-17 million range," said Tim Fleming, analyst for Kelley Blue Book. "Increased fleet sales and rising incentive spending among automakers remain the factors to watch, but the retail demand appears to be holding steady, signaling the industry's strong run isn't over quite yet." Related Video: Image Credit: Getty Earnings/Financials Ford Lincoln 5g Connectivity mobility auto industry financial

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.