2014 Navigation Leather Heated Sunroof Rear Camera Lifetime Warranty on 2040-cars

Auto blog

Ford trademarking 'Mach 1,' possibly for Mustang

A legendary name might be accompanying the redesigned, 2015 Mustang when it finally makes its world debut - Mach 1. Stumbled upon by the team at Ford Authority, the Mach 1 title was found in a trademark filing with the US Patent and Trademark Office, and would revive a name last used on the fourth-generation, 2003 Mustang.
While the the 2003 vintage was well and good, the Mach 1 is really remembered for a three-year run from 1969 to 1971 - it's best to just forget the emissions-choked 1972 to 1978 Mach 1s - when power output ranged from a modest 250 horsepower with the two-barrel, 351-cubic-inch Windsor V8 to "375 hp" (actual output was rumored to be well north of 400 horsepower) with the righteous, 429-cubic-inch Super Cobra Jet V8.
What does the title hold for the sixth-generation Mustang? It's tough to say. The fanatics at Ford Authority seem to think Mach 1 could take the place of the Shelby GT500 at the top of the Mustang hierarchy, which sounds like a valid argument. At the same time, we could see the SVT Cobra moniker returning for the flagship model, and the Mach 1 doing battle with the Chevrolet Camaro Z/28 (unless the Boss 302 were to return). Confounding things is the historical precedent - the Mach 1 was responsible for the death of the Mustang GT in 1969, so it might make sense as a volume performance model.

2015 Ford F-150's aluminum body not expected to hurt resale value

A cloud of skepticism has hung over the 2015 Ford F-150 since even before it went on sale. The issue had nothing to do with the truck's capabilities but instead over reservations about the switch to aluminum body panels. The change helped shed about 700 pounds off the scales, but the lighter metal also came with the potential for higher repair costs. Edmunds even recently whacked its pickup with a hammer just to find out how much it would cost. However, this might not be a problem, because the latest calculations indicate resale value for the new F-150 is on the rise. The residual experts at ALG estimate that the 2015 F-150 is going to hold 58 percent of its value over the next three years, versus 52 percent for the 2014 model, according to Bloomberg. That figure also gives the Ford the highest forecasted resale value among American fullsize pickups. The 2015 Toyota Tundra leads the segment by holding 63 percent. Meanwhile, the 2015 Chevrolet Silverado and GMC Sierra both come in with 51 percent, and the Ram 1500 holds 46 percent. Finally, the 2015 Nissan Titan comes in at 42 percent. The researchers believe that the improvement in fuel economy for the 2015 F-150 at up to 26 miles per gallon highway offsets higher body repair costs. "We are giving credit for the aluminum construction in the fuel efficiency we're seeing," Eric Lyman, ALG vice president of industry insights, said to Bloomberg. "We are not putting in a negative adjustment for concerns around repair costs or durability associated with aluminum." Ford has long-been preparing for the switch to aluminum. The company purposefully designed the body sections to make repairs easier, and it also partially subsidized dealers' investments for new equipment to do the work. Related Video:

Ford director says company has big efficiency plans, but no dedicated EV

The annual autofest known as the North American International Auto Show previews a plethora of exciting new products that we'll see and drive later in the year, from tiny urban commuters to family sedans and crossovers to hard-working big pickups and SUVs. It's also a once-a-year cornucopia of auto executives and leaders from around the world. "There will be some really fun stuff that you'll hear about in the future" - Ford's Kevin Layden So, in-between dozens of cool new-product unveilings on rotating stages during the two press days preceding the public show, we auto scribes grab what planned and impromptu interviews we can. Sessions with top industry leaders can be hard to get, but I was able to score a seat in a group session with then-General Motors North America president (now executive VP of global product development) Mark Reuss, and I also managed brief one-on-ones with a trio of vehicle electrification leaders, one each from Ford, BMW and GM, and what they said then remains relevant now. First up is Kevin Layden, Ford's Director of Electrified Powertrain Engineering. ABG: Where will Ford go beyond its current Focus EV and hybrids, and will there be a Ford EV and/or hybrid on its own energy-optimized platform one day. KL: We don't want to do a dedicated electric vehicle with all the development costs borne by a niche product. At the Michigan Assembly plant right now we're building the Focus electric, PHEV and EcoBoost on the same assembly line. Also the C-Max, with both a hybrid and an Energi plug-in, and we use that same power pack in the Fusion Hybrid and Energi. We want to be, "The power of choice" [a Ford marketing slogan], so having that choice for customers is very important. And if I want to sell the Fusion, Focus and C-Max globally, we can use these power packs wherever it makes sense. So as we go forward, you'll see us proliferating the power packs we have today. Then the question is, what do we do next? There will be some really fun stuff that you'll hear about in the future. ABG: Is the efficiency difference between a dedicated ultra-efficient vehicle platform and a shared multi-use platform getting smaller as all platforms get more efficient? KL: Exactly. Were going through aero studies now on wheels and tires and hood sealers on base vehicles. We have full aerodynamic wind tunnel studies going on with the base Focus and C-Max, so all of that [aerodynamic improvement] will be there for EVs.