2014 Ford Focus Se on 2040-cars

Auto blog

Ford Fiesta RS with 250 horsepower mooted

We know Ford is unveiling a new Focus RS on February 3, and it's heavily rumored to arrive brandishing an all-wheel-drive powertrain and as much as 350 horsepower. The folks at Ford Performance have also promised they are working on at least 12 models through 2020, and that still leaves a lot of time to get additional exciting vehicles out the door. One of those could be an RS version of the Fiesta, according to Evo. An RS take on the latest Fiesta would obviously need substantial boosts in both power and handling ability to warrant the work over the current top Fiesta ST (pictured above), which is already one of our favorite cars. Evo speculates that the 1.6-liter turbocharged four-cylinder could be tuned further, possibly up to about 250 horsepower, and the high-performance hatch might even take some inspiration from the Fiesta WRC rally car with an all-wheel drive system. An unnamed Ford spokesperson remained cagey about the chances for the pint-sized hot hatch to Evo, though. "We can't say anything at this moment, but we have promised to produce 12 performance models in the coming years. We'll leave it for you to decide whether that includes a Fiesta at this moment," the source said to the magazine. Evo doesn't expect a launch across the pond until at least 2017, if it actually happens. Of course, there's the lingering question of whether such a niche project would work in the US. In Europe, the Fiesta RS would challenge similarly diminutive speedsters like the Volkswagen Polo R and Audi S1, but true competitors of an equivalent size here would be much more scarce. In fact with 250 hp, the hotter Fiesta could provide unwelcome competition within Blue Oval showrooms for the Focus ST. Featured Gallery 2014 Ford Fiesta ST View 47 Photos News Source: EvoImage Credit: Ford Ford Hatchback Performance ford performance ford fiesta rs

2015 Ford Mustang EcoBoost already hitting 12-second quarters

The arrival of a new Ford Mustang means many things to many people, but not least of them is drag racers. The pony car has always been a mainstay of the drag strip, and the Ford Racing team aims to carry that reputation forward with this latest generation. So it cooked up a few basic modifications on three new 'Stangs and headed to the strips at US 131 and Milan Dragway to see what they could coax out of 'em.
Impressively, the 5.0-liter V8 Mustang GT with a few modifications (but no forced induction) managed to clock a quarter-mile time of 11.77 seconds. Another Mustang GT fitted with a supercharger clocked a blistering 10.97 seconds. But just as intriguing was the modified EcoBoost model that, with only four cylinders and 2.3 liters of displacement, still passed the gates in just 12.56 seconds - nearly half a second better than expected. This with modification limited to a new subframe, half-shaft, drive shaft loops, exhaust, engine calibration, slicks, roll cage and bucket seat. Well done, boys.

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.