2013 Ford Focus Se Hatchback Salvage on 2040-cars

Auto blog

Ford evaluating new Fiesta RS?

Word coming in from across the pond has it that Ford is working on developing the business case to create a new Fiesta RS. The development is encouraged by the extremely positive reception the existing Fiesta ST has garnered to date, and the emergence of the above-pictured Fiesta RS WRC rally car, but it'll take more than goodwill to make a more extreme version a reality.
According to Auto Express, a new roadgoing Fiesta RS would almost certainly be based closely on the ST version, albeit with some vital differences. Its 1.6-liter turbo four would be increased from 180 horsepower to somewhere around 230 hp, and that powertrain would be accompanied by lightweight alloys inside blistered wheel arches, a stripped-out interior and possibly lightweight bodywork.
The vehicle's approval would reportedly require a strong business case in Europe, and not just in the UK where Ford hot hatches traditionally enjoy a strong following. It's unclear whether the Fiesta RS would potentially make the transatlantic voyage to American showrooms, but between it and the larger Focus RS, hopefully the Blue Oval wouldn't leave its home market out of the action altogether.

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

IIHS Crash-tests Expose American Muscle Cars' Weaknesses | Autoblog Minute

Turns out American muscle cars aren?t that strong according to IIHS crash tests. The Insurance Institute for Highway Safety put three iconic American sports cars through a range of performance crash tests. Chevrolet Dodge Ford Autoblog Minute Videos Original Video crash test camaro challenger