2013 Ford Focus Se on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

GM, Ford, Chrysler halt some Michigan operations over natural gas shortage

WASHINGTON - General Motors said late on Wednesday it will temporarily suspend operations at 11 Michigan plants and its Warren Tech Center after a utility made an emergency appeal to users to conserve natural gas during extreme winter cold. Fiat Chrysler Automobiles also said it had canceled a shift on Thursday at both its Warren Truck and Sterling Heights Assembly plants and was considering whether it would need to cancel additional shifts. GM said it had been asked by Consumers Energy, a unit of CMS Energy Corp, to suspend operations to allow the utility to manage supply issues after extreme cold temperatures and a fire at a compressor station. It said workers were told not to report for the shifts at its Orion Assembly, Flint Assembly, Lansing Delta Township Assembly and Lansing Grand River Assembly plants, as well as other stamping and transmission plants on Wednesday evening and early Thursday. GM said it was still assessing when employees could return to work. Workers at its Warren Tech Center were also told to stay home on Thursday. In a video message posted on Facebook, CMS Energy Chief Executive Patricia Poppe said large companies, including Fiat Chrysler, Ford Motor Co and GM, had agreed to "interrupt" production schedules through Friday to tackle the issue prompted by a fire at a Michigan facility and the record-breaking cold. Poppe said the usage cuts by large businesses were not enough, and urged 1.8 million Michigan customers to turn down thermostats as much as they could to cut natural gas use in order to protect critical facilities like hospitals and nursing homes. "I need you to take action right now," she said. Ford said it had also taken steps to reduce energy use at its four Michigan plants supplied by Consumers Energy, but added the situation remained fluid. A spokeswoman said it had reduced heating levels at Livonia Transmission and Van Dyke Transmission, stopped heat treatment processes at Sterling Axle and shut down the paint process at Michigan Assembly. Consumers Energy sent an alert to mobile phones in Michigan asking residents to reduce natural gas use.

Watch how Ford torture-tested the 2015 F-150

The Ford F-150 has been the best-selling truck in the United States for the past 37 years, and the best-selling vehicle outright for the past 32. That's quite a legacy, and thus, it's no surprise that Ford worked super-duper-extra hard on creating the all-new, aluminum-bodied 2015 F-150 that debuted at the Detroit Auto Show earlier this year.
During an event at the company's headquarters in Dearborn, MI this week, we were able to see all of the ways that Ford endurance tests, not just the new F-150, but all of its vehicles. From examining things like light exposure to interior materials and paint finishes, to making sure that corrosion absolutely does not happen when steel components come in contact with aluminum panels in the new truck. The goal: ensure that the new F-150 is nothing short of "Built Ford Tough."
But that's only a small part of the story. Of course, the new F-150 has to be able to withstand whatever a pickup buyer might throw at it - and truck buyers arguably demand the most from their vehicles. So in an effort to convey just what the new F-150 had to go through before being given the final go-ahead, Ford has released a series of videos, showing how its new halo truck was indeed torture tested.