2012 Ford Focus Titanium Hatchback 4-door 2.0l on 2040-cars

Auto blog

The Ford that won't let you speed

The new Ford S-Max introduces a technology called Intelligent Speed Limiter, a cruise control setting that can read speed limit signs and automatically keep the car at the maximum posted speed even when that speed changes. The driver activates it by pressing a button on the steering wheel, the S-Max does the rest, and the minivan will inform the driver if it exceeds the limit for some reason, for instance, when going downhill. Slowing down, like when crossing from a 40 mile-per-hour zone to a 30-mph zone, is handled by fuel flow, not by the brakes - the car simply cuts engine power. It works anywhere from 20 mph to 120 mph, yet as with every other cruise control it's totally driver controlled; pressing the accelerator will override the system at any time. The aim is to help drivers avoid tickets, not take over the car. You can only get it on the UK S-Max for now. There's a video above that explains it and press release below with more information. Could this spell the end for speeding tickets? March 23, 2015 -- Breaking the speed limit is not something we always do on purpose. All the same, it can be costly in terms of fines, and driving bans, as well as playing a significant role in many road accidents. In the U.K. alone, in 2013, more than 15,000 drivers received fines of GBP100 or more for speeding. We are now launching Intelligent Speed Limiter, a technology that could help prevent drivers from unintentionally exceeding speed limits. The system monitors road signs with a camera mounted on the windscreen, and slows the vehicle as required. As the speed limit rises, the system allows the driver to accelerate up to the set speed – providing it does not exceed the new limit. "Drivers are not always conscious of speeding and sometimes only becoming aware they were going too fast when they receive a fine in the mail or are pulled over by law enforcement," said Stefan Kappes, active safety supervisor, Ford of Europe. "Intelligent Speed Limiter can remove one of the stresses of driving, helping ensure customers remain within the legal speed limit." Further new technologies available for the new S-MAX include the Pedestrian Detection system that will reduce the severity of some collisions involving vehicles and pedestrians, or help drivers avoid some impacts altogether. The versatile people-mover also is equipped to help out at junctions where it is difficult to see.

Ford will add lots of carbon fiber to new vehicles

With BMW receiving a bunch of positive press for its usage of carbon fiber to build its i3 and i8 plug-in vehicles, Ford is jumping into that game as well. The US automaker has reached a manufacturing agreement with Dow Chemical to speed up the use of that material in Blue Oval vehicles. Carbon fiber usage will cut weight from Ford's new products, boosting fuel efficiency as a result. Ford will work with DowAksa, a 50/50 joint venture between Dow Chemical and Turkey-based Aksa Akrilik Kimya Sanayii A.S, on a manufacturing partnership. The goal is to speed up technology research to make it cheaper to make cars and trucks with carbon fiber materials. Ford's light-weighting efforts received a boost of sorts this week when its aluminum-body 2015 F-150 was awarded a five-star Overall Vehicle Score in the National Highway Traffic Safety Administration's testing, making this year's version the safest to date. The new body construction cut 700 pounds from the truck's curb weight. Take a look at Ford's press release about DowAksa below. FORD, DOWAKSA TO JOINTLY DEVELOP CARBON FIBER FOR HIGH-VOLUME AUTOMOTIVE LIGHT-WEIGHTING APPLICATIONS Ford and DowAksa formalize agreement to advance the adoption of cost-effective carbon fiber components through technology validation and proof of concept to reduce vehicle weight and increase fuel efficiency without sacrificing strength Agreement provides pathway for a high-volume manufacturing partnership New joint development agreement accelerates joint research announced in January in partnership under new U.S. composites manufacturing institute Ford and DowAksa today signed a joint development agreement (JDA) to formally advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter for greater fuel efficiency, performance and capability. The agreement, between Ford Motor Company, Ford Global Technologies and DowAksa – a 50/50 joint venture between The Dow Chemical Company and Aksa Akrilik Kimya Sanayii A.S – will combine DowAksa's feedstock capacity, carbon fiber conversion and downstream intermediates production capabilities with Ford's expertise in design, engineering and high-volume manufacturing. The goal is to produce materials that make cost-effective carbon fiber composite parts that are much lighter than steel but meet automotive strength requirements.

Weekly Recap: Marchionne's Manifesto again calls for industry consolidation

Sergio Marchionne isn't taking no for an answer. Despite public rebuffs from General Motors and Ford, the leader of Fiat Chrysler Automobiles continues to push for consolidation within the auto industry. His latest assertion came Wednesday when he said a combination of FCA with another automaker could net savings of $5 billion or more annually. No, this isn't about selling his company, he claimed, it's about cutting costs. Put simply, the auto industry wastes money, Marchionne said during FCA's earnings conference call. Companies invest billions to develop basic components that all cars use, but many consumers don't care how they work or recognize the differences. "About half of this is really relevant in terms of positioning the car in the marketplace," he said. "The other half, in our view, is stuff which is neither visible to the consumer nor is it relevant to the consumer." In 2014, top automakers spent more than $100 million on product development, FCA estimated. Marchionne said consolidation could save up to $1 billion on powertrains alone, noting that almost every automaker offers four- and six-cylinder engines. Not everyone has to make their own, he contended. "The consumer could not give a flying leap whose engines we are using because they are irrelevant to the buying decision." That's pretty provocative for enthusiasts, but less so for average consumers. Still, there are major differences in power and efficiency ratings, even among similar engines. Skeptics could argue consolidation would also weaken competition and reduce choices for car buyers. Marchionne stressed his presentation, curiously entitled Confessions of a Capital Junkie, wouldn't require closing factories or dealerships. It's not his final "big deal" as CEO, intent to sell FCA, or a way to elevate his company up the automotive food chain. He claims he wants to fundamentally change the industry and its habit for burning cash. "The horrible part about this, and the thing that I find most offensive, is that the capital consumption rate is duplicative," he said. "It doesn't deliver real value to the consumer and it is in its purest form, economic waste." Other News & Notes Ford Profits dip in first quarter Ford profits fell $65 million to $924 million in the first quarter, hampered by slight dips in revenue and sales.