2011 Ford F-350 Fx4 on 2040-cars

Auto blog

2015 Ford Mustang EcoBoost flogged and analyzed by Ignition

Aside from the way it looks and perhaps its independent rear suspension, the biggest bit of news on the 2015 Mustang may be the inclusion of its 2.3-liter, turbocharged four-cylinder engine. That blown mill marks the first time since the Mustang SVO of the '80s that a turbo has been fitted under the engine of Ford's pony car.
The Mustang EcoBoost is the subject of the latest episode of Ignition from Motor Trend, giving us a great look at the technical, nitty-gritty side of the turbocharged coupe. Covering it from bow to stern, host Carlos Lago walks us through the boosted Ford before taking to the track for some driving impressions, with particular praise given to the low-end grunt of the 2.3-liter mill.
Check out the full video and then let us know which 2015 Mustang has your interest piqued the most - the EcoBoost four, the 5.0L V8 or the entry-level V6.

NHTSA closes Ford F-150 EcoBoost acceleration probe

Typically when we report on the findings of an investigation from the National Highway Traffic Safety Administration, it's because the government body has discovered a safety issue and prescribed a recall. In this case, however, NHTSA has closed an investigation into a reported performance deficit without ever getting to the recall stage.
The issue revolves around the Ford F-150 - specifically those equipped with the 3.5-liter EcoBoost engine - of which some 360,000 were built in the 2011, 2012 and 2013 model years. After receiving an initial 95 complaints, NHTSA opened an investigation last May - almost a year ago - into the reported issue of reduced engine power under hard acceleration. The agency has since received a total of 525 such complaints, and Ford itself reported receiving over 4,000.
Together, NHTSA and Ford determined that the problem resulted from cylinders misfiring, an issue itself stemming from water getting into the charge air cooler (CAC) mated to the turbochargers. In particularly humid or rainy conditions, water was found to get into the CAC, causing some of the cylinders to misfire, which in turn triggered the ECU to disable those cylinders in order to protect the catalytic converter from damage.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.