2008 Ford F-250 on 2040-cars

Auto blog

Ford recalling 12,300 2015 F-150 pickups

Ford is recalling 12,300 of its new 2015 F-150 pickup trucks in North America. According to the automaker, an upper l-shaft may have been riveted improperly on these trucks, which can cause it to separate. If that happens, drivers may lose steering control without warning. Yikes. The affected trucks were built at Ford's Kansas City Assembly Plant between March 21 and 25, as well as the Dearborn Truck Plant between March 21 and 30. There are 12,328 total trucks included in this recall – 8,963 in the United States, 3,348 in Canada, and 17 in Mexico. Only 5,606 of the trucks are in customers' hands, the rest have yet to be sold. Ford is not aware of any accidents or injuries related to this problem, but knows of one incident where steering control was lost, and believes it to be related to this issue. Scroll down for Ford's official statement. Related Video: FORD ISSUES SAFETY RECALL FOR CERTAIN 2015 FORD F-150 VEHICLES IN NORTH AMERICA FOR UPPER I-SHAFT RIVET ISSUE Ford Motor Company is issuing a safety recall for approximately 12,300 2015-model Ford F-150 vehicles in North America for an upper I-shaft that might have been riveted improperly, potentially causing it to separate. If that happens, it could result in the loss of steering control without warning, increasing the risk of a crash. Ford is not aware of any accidents or injuries, but is aware of one report of loss of steering believed to be related to this condition. Affected vehicles include certain 2015 F-150 vehicles built at Kansas City Assembly Plant from March 19, 2015 to March 21, 2015 and certain 2015 F-150 vehicles built at Dearborn Truck Plant from March 21, 2015 to March 30, 2015. There are 12,328 vehicles that might be affected in North America, including 8,963 in the United States and federalized territories, 3,348 in Canada and 17 in Mexico. Of those, 6,722 vehicles are unsold, meaning 5,606 vehicles are in customer's hands. Dealers will inspect the upper I-shaft assembly and replace it if necessary at no cost to the customer.

Weekly Recap: Toyota propels hydrogen fuel cells

Toyota is serious about hydrogen fuel cells, and it wants the auto industry to follow suit. The Japanese automaker said this week it's releasing 5,680 fuel cell patents from around the world, including technologies used on its upcoming sedan, the 2016 Mirai. The move is unusual, but not unprecedented, as Tesla similarly released its electric vehicle patents last year. The idea for Tesla, and now for Toyota, is to spur development of alternative propulsion. "By eliminating traditional corporate boundaries, we can speed the development of new technologies and move into the future of mobility more quickly, effectively and economically," said Bob Carter, Toyota Motor Sales senior vice president of automotive operations, in a statement. Toyota's fuel cell patents will be free to use through 2020, though patents related to producing and selling hydrogen will remain open forever. Toyota said it would like companies that use its patents to share their own hydrogen patents, but won't require it. "What Toyota's doing is really a logical move, and really a good move for the industry," Devin Lindsay, principal powertrain analyst with IHS Automotive, told Autoblog. The announcement was made at the Consumer Electronics Show in Las Vegas. It comes as Toyota prepares to launch the hydrogen-powered Mirai in a limited number late this year in California. The launch will be extended to the Northeastern United States next year. Toyota also has announced plans to support networks of fueling stations in each region to try to smooth consumer adoption. The Mirai has a 300-mile range on a tank of hydrogen, and it takes about five minutes to refill. Fuel cells have been receiving increased attention recently, and Audi and Volkswagen debuted hydrogen-powered cars at the 2014 Los Angeles Auto Show. Honda, another proponent of the technology, also showed its updated FCV concept in November in Japan. The company, however, has delayed its fuel cell sedan a year until 2016. Like Toyota, Honda says its hydrogen-powered car will have a range of 300 miles or more. Meanwhile, Hyundai currently offers leases for fuel-cell powered Tucsons, which have a 265-mile range, in Southern California. Despite the optimism some automakers have for fuel cells, the technology still faces barriers. A lack of filling stations has long held it back, and many consumers are not familiar with the potential benefits.

Ford and Lincoln recall about 170,000 vehicles over defective rear-view camera

Ford and Lincoln have jointly issued a safety recall that includes nearly 170,000 vans and SUVs built between the 2018 and 2023 model years. The vehicles included in the campaign are equipped with a rear-view camera whose image can cut out while the driver is backing up. Assigned recall number 23V-598 by the National Highway Traffic Safety Administration (NHTSA), the campaign includes the following cars: 7,649 units of the 2020-2023 Aviator fitted with the standard rear-view camera and built from October 19, 2019, to August 17, 2023. 70,600 units of the 2018-2021 Navigator fitted with the 360-degree camera and built from March 16, 2017, to December 23, 2021. 66,740 units of the 2022-2023 Transit fitted with either camera system and built from February 26, 2021, to August 17, 2023. 24,468 units of the 2021 Bronco fitted with the 360-degree camera and built from September 23, 2020, to December 22, 2021. Ford explains that the defect is present in all of the 169,277 vehicles included in the campaign. While these are different cars equipped with different technology, they all suffer from the same problem. The company explains that "customers may intermittently experience either a rear camera blue image or a full blue or black image on the SYNC [infotainment system] screen when the vehicle is placed in reverse, or when the 360-degree view is selected and available." It adds that losing the camera's image while backing up increases the risk of the crash. The cause of the problem varies from model to model. Ford has narrowed it down to the camera hardware, the wiring retention, and the Image Processing Module - V (IPMB) software. It adds that "fretting corrosion causes tin oxide formation on the internal camera connector due to [a] thermally-induced micro-movement between the tin-plated contact surfaces," and that the rate of tin oxide accumulation depends on factors such as the temperature and the humidity. It has also traced some of these issues to a problem during the manufacturing process. Ford will begin notifying owners of affected vehicles by mail on October 2. When parts are available, owners will be asked to bring their van or SUV to an authorized dealer so that a technician can replace the rear-view camera. Transit models included in the campaign will also receive a software update. Owners who have already paid to fix the problem can claim a reimbursement until June 30, 2024. This isn't Ford's first rear-view camera-related recall.