2014 Ford F150 Fx4 on 2040-cars

Auto blog

Ford recalls 591,177 vehicles in four separate campaigns

Ford is issuing recalls for a total of 591,177 vehicles worldwide, in four separate campaigns. The announcement comes just days after the discovery of door-latch problems in 390,000 of the automaker's cars. The largest of these new recalls covers 518,313 examples of the Ford Fusion and Lincoln MKZ from the 2013-2015 model years, plus the 2015 Edge. Of these, 487,301 of are in the US and 31,012 are in Canada. For vehicles in cold-weather areas, the bolts that hold the steering gear motor can corrode and fracture. If this happens, it could cause the power steering to fail, but manual control would be retained. There are no reported accidents or injuries from this problem. To fix things, dealers will replace the bolts and seal them. The next campaign covers 50,157 examples of the 2014 Focus, Edge, Escape, and Transit Connect, plus the Fiesta from 2014 and 2015. Of these, 45,505 are in the US, 4,618 in Canada, and 34 in Mexico. All of them exhibit a problem with the fuel pump where the nickel plating can cause the part to seize and the engine to stall, if this occurs. (All of which sounds like recent problems with Nissan and BMW models.) According to Ford, there is one allegation of an accident from this problem. Dealers will replace the fuel delivery module to fix the problem. Ford is also recalling 22,616 units of the 2015 Lincoln MKZ because when the headlights are on, the parking lamps are brighter than they are allowed to be. The light could affect the vision of other drivers. This campaign includes 21,435 of them in the US, 1,066 in Canada and 115 in Mexico. There are no accidents or injuries from the issue, but Ford is updating the software to dim the lights on these sedans. Finally, Ford has a safety campaign for 91 examples of the 2015 F-150 because an underbody heat shield might not be properly installed or not present at all, which can be a fire risk. There are no reports of any actual accidents or fires, though. The affected pickups will have the parts replaced or added, as necessary after a dealer inspection. To see the specific build dates for the models affected by each of these campaigns, you can read about them in the press release below. Related Video: FORD ISSUES FOUR SAFETY RECALLS IN NORTH AMERICA Ford Motor Company is issuing four safety recalls in North America. One accident and no injuries are attributed to these conditions.

MotorWeek finds nice things to say about the 1993 Ford Probe

This latest in MotorWeek's series of Retro Reviews continues its recent trend of remembering the massive glut of sports coupes that hit the market in the '90s. While vehicles like the Mitsubishi 3000GT, Mazda RX-7, and Ford Mustang all enjoy solid reputations down to this day, the 1993 Ford Probe, well... doesn't. As you'll soon see, though, the show's opinion suggests the coupe's second generation isn't really all that bad. Turns out they just weren't particularly sporty. Ford and Mazda developed the Probe together, and the Japanese company supplied both the base 115-horsepower 2.0-liter four-cylinder and the 164-hp 2.5-liter V6 in the GT trim. The original's pseudo-angular look gave way to a much smoother shape for the second generation. Of course, pop-up headlights remained, which were a design hallmark for many of this era's sports coupes. After driving it, MotorWeek proclaims the Probe is "a winner" and considers the handling a "delight." That's not a big surprise, considering that in those days, a car had to be really bad not to get a decent review from Television's Original Automotive Magazine. However, the show hints at some of the reasons the coupe isn't so well remembered today. Even the GT reportedly suffers from soft springs and lots of understeer, which sounds like exactly the opposite anyone hoping to drive the coupe enthusiastically would want. To sum it all up, we're sure you're just as happy as we are that Ford went back on its initial plan to shelve the Mustang in favor of the front-drive Probe. Related Video:

Now you can 3D print your favorite new Ford

Ford is letting people build their own cars, offering digital files so people can print 3D versions of their favorite models. This is way cooler than any old Matchbox or Hot Wheels toy. Ford this week started offering printable files for the F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST. Folks can order the 3D models in 1:32 scale in plastic (that'd make the mighty large pickup truck about eight inches long) but the digital files let users tweak the scale to the their liking. Once people have the digital files, they can print out their own miniature versions of the cars, made out of soft plastics, sandstone, and even some metals. Ford says it expects demand for such files to grow as sales numbers for desktop 3D printers surges to 1 million units in 2018. That's up from about 44,000 last year. Ford already offers digital files for its company logo, the 1.0-liter engine block, and two older Mustang models. But these new models take this to a totally different scale. Check out Ford's press release below. PRINT YOUR FAVORITE FORD VEHICLE AT HOME: FORD FIRST AUTOMAKER TO OPEN ONE-STOP 3D SHOP ONLINE - Consumers can now download digital images and 3D-printable files of Ford vehicles at the first-ever automaker-licensed, one-stop 3D shop online - The Ford 3D Store offers printable files of F-150 Raptor, Shelby GT350R, Focus ST and Fiesta ST; more models will become available later - Online store is powered by TurboSquid.com, the leader in providing automotive digital imaging and 3D-printable files Want to 3D-print a Shelby GT350R at home? Or would you prefer to simply purchase an F-150 Raptor 3D digital image for a presentation? How about both? Ford fans can now download digital images for Ford vehicles at the first-ever, automaker-authorized one-stop online store for 3D-printable vehicle files. The Ford 3D Store, 3d.ford.com, allows customers to use advanced technology to make their own models of Ford vehicles of the size and material they desire, or simply opt to purchase a 3D digital file from a growing library of more than 1,000 Ford images. "3D printing at home is a growing trend, and it makes sense for us to offer our customers a chance to make their own 3D Ford models," said Mark Bentley, licensing manager, Ford Global Brand Licensing.