2002 Ford F-150 Long Bed on 2040-cars

Auto blog

Want a V8 on the cheap? Buy a work truck

In case you didn't notice, V8 cars have gotten pretty expensive. If you want a modern muscle car like the Dodge Challenger R/T, Ford Mustang GT, or Chevy Camaro SS, you'll need between $34,000 and $38,000 for a stripped out example of one. The cheapest of those is the Challenger, and the priciest is the Camaro. These are also the cheapest V8 cars the companies offer. But if you absolutely have to have a V8 for less, there is an option, work trucks. As it turns out, all of the Big Three offer their most basic work trucks with V8s. And because they're so basic, they're pretty affordable, especially when sticking with the standard two-wheel drive. A Ram 1500 Tradesman with a V8 can be had for as little as $29,840, which is a little more than $4,000 less than a Challenger R/T. For a bit more at $30,275, you can have a Chevy Silverado W/T, almost $8,000 less than a Camaro SS. The most expensive is the V8 Ford F-150 starts at a starting price of $30,670, which is a bit over $5,000 less than the Mustang. Of course you'll be in an ultra bare bones vehicle with few comforts, and the price will go up if you add stuff, but we're bargain hunting here, and sacrifices are sometimes necessary. Besides, what you lose in comfort, you gain in loads of cargo space and towing (try to look at the bright side). Also, as a side note, all three trucks are available with optional electronic locking rear differentials. At the discounted price of these trucks, you still get a heaping helping of power. The most potent of the trio is the Ram 1500 Tradesman with 395 horsepower and 410 pound-feet of torque generated by a 5.7-liter V8. Compared with the Challenger R/T, the Ram is up by 20 horsepower and they're tied for torque. The value proposition is even more stark between the two vehicles when looking at the price per horsepower. Each pony in the Ram costs $75.54, while the Challenger charges you $90.91. The Challenger is also more expensive per horsepower than its close competitors. The F-150's 5.0-liter V8 is just barely behind the Ram with 395 horsepower and 400 pound-feet of torque. That's still more power than the Challenger, and it matches the torque of the 2017 Mustang GT. On the down side, it still would be down 20 horsepower on that same 2017 Mustang, and it's behind by 60 horsepower and 20 pound-feet on the new 2018 Mustang GT. The F-150 also just edges out the Mustang in the dollar per horsepower measure.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.

2015 Ford F-150 to get up to 26 miles per gallon

The 2015 Ford F-150 is one of the most important US vehicle debuts in years, be it in the pickup segment or the entire marketplace. While we've already known about the truck's engine lineup, its payload ratings and we've even learned a bit about how it drives, the truck's EPA-estimated fuel economy ratings have remained a mystery. The wait is finally over. Ford has announced numbers that put the latest F-150 as the mileage leader among gasoline-powered, full-size pickups in the US, with its new 2.7-liter EcoBoost V6 topping the charts. Starting with the entry-level naturally aspirated 3.5-liter V6, the rear-wheel-drive F-150 is rated at 18-miles-per-gallon city, 25-mpg highway and 20-mpg combined. Opting for four-wheel drive drops those numbers slightly to 17/23/19. If fuel economy is your absolute priority, then upgrading to the 2.7-liter EcoBoost V6 is the hot ticket. It improves things further to 19/26/22 in rear-wheel drive trim or 18/23/20 with four-wheel drive. The carryover naturally aspirated 5.0-liter V8 is rated at 15/22/18 as a 4X2 or 15/21/17 as a 4X4. Finally, the flagship 3.5-liter EcoBoost V6 tops the range in available torque and offers buyers 17/24/20 ratings with rear-wheel drive or 17/23/19 with four-wheel drive. "We are delivering with the toughest, smartest and most capable F-150 ever – and now the highest EPA-estimated fuel economy ratings of any full-size gas-powered pickup in America," said Raj Nair, Ford group vice president, Global Product Development, in the company's announcement. Depending on engine and drivetrain configuration, Ford contends that the 2.7-liter EcoBoost's top rating puts fuel economy up between 5 and 29 percent over the current generation, thanks in large part to the truck's lighter aluminum construction. Obviously, these are EPA estimates, and your mileage may vary – ours has. Recently, Autoblog team members have had real difficulty even approximating government mpg estimates on many EcoBoost models, including the new F-150. Scroll down to read Ford's full announcement, including comparisons to rival models.