2016 Ford Explorer Interceptor on 2040-cars

Auto blog

Aluminum lightweighting does, in fact, save fuel

When the best-selling US truck sheds the equivalent weight of three football fullbacks by shifting to aluminum, folks start paying attention. Oak Ridge National Laboratory took a closer look at whether the reduced fuel consumption from a lighter aluminum body makes up for the fact that producing aluminum is far more energy intensive than steel. And the results of the study are pretty encouraging. In a nutshell, the energy needed to produce a vehicle's raw materials accounts for about 10 percent of a typical vehicle's carbon footprint during its total lifecycle, and that number is up from six percent because of advancements in fuel economy (fuel use is down to about 68 percent of total emissions from about 75 percent). Still, even with that higher material-extraction share, the fuel-efficiency gains from aluminum compared to steel will offset the additional vehicle-extraction energy in just 12,000 miles of driving, according to the study. That means that, from an environmental standpoint, aluminum vehicles are playing with the house's money after just one year on the road. Aluminum-sheet construction got topical real quickly earlier this year when Ford said the 2015 F-150 pickup truck would go to a 93-percent aluminum body construction. In addition to aluminum being less corrosive than steel, that change caused the F-150 to shed 700 pounds from its curb weight. And it looks like the Explorer and Expedition SUVs may go on an aluminum diet next. Take a look at SAE International's synopsis of the Oak Ridge Lab's study below. Life Cycle Energy and Environmental Assessment of Aluminum-Intensive Vehicle Design Advanced lightweight materials are increasingly being incorporated into new vehicle designs by automakers to enhance performance and assist in complying with increasing requirements of corporate average fuel economy standards. To assess the primary energy and carbon dioxide equivalent (CO2e) implications of vehicle designs utilizing these materials, this study examines the potential life cycle impacts of two lightweight material alternative vehicle designs, i.e., steel and aluminum of a typical passenger vehicle operated today in North America. LCA for three common alternative lightweight vehicle designs are evaluated: current production ("Baseline"), an advanced high strength steel and aluminum design ("LWSV"), and an aluminum-intensive design (AIV).

Ford cuts F-150 fuel use through CNG-capable fleet sales, EcoBoost

The possibility of $1-a-gallon fuel would make a lot of US governmental entities sit up and take notice. The state of Oklahoma and the city of Dallas are making that happen. Those two entities are buying up a bunch of Ford F-150 pickups retrofitted to run on compressed natural gas (CNG), all in the name of cost savings and emissions reduction. Oklahoma is buying 256 of the F-150s, while Dallas is buying another 65. The trucks, which cost between $6,000 and $9,500 to retrofit (on top of the original price), can run on either CNG or liquefied petroleum gas (LPG). And while that's a substantial hit, conversion costs are typically paid back in three years thanks to lower refueling costs. CNG prices are as low as $1.07 a gallon in parts of Oklahoma. How much lower? The national average price for CNG is about a buck and a half less than the $3.67 average per-gallon cost of gasoline. And CNG prices are as low as $1.07 a gallon in parts of Oklahoma, where CNG is plentiful. CNG also cuts tailpipe greenhouse gas emissions by about 20 percent compared with gasoline, while the retrofitted trucks can go as far as 450 miles from their CNG tanks in addition to the 300-mile range from their conventional tanks. That's useful in a bit state like Texas. This week, the US Energy Department trumpeted a $5.9-billion loan program that Ford accessed to upgrade its factories for production of its EcoBoost engines, noting that Ford has sold a half-million F-150 trucks with EcoBoost engines. Those trucks have collectively cut fuel use by almost 57 million gallons of gas during the past three-plus years. Check out Ford's press release on the F-150 purchases below and the Energy Department's statement about its loan program here. OKLAHOMA, DALLAS ORDER 300-PLUS CNG-CAPABLE FORD F-150 PICKUPS AS DEMAND GROWS FOR ALTERNATIVE FUEL OPTION The state of Oklahoma and its agencies to buy 256 Ford F-150 trucks prepped to run on compressed natural gas; Dallas orders 65 for its fleet 2014 F-150 available with gaseous-fuel prep option on 3.7-liter V6 engine; can run on CNG or liquefied petroleum gas (also called propane autogas) By summer, Ford will offer eight vehicles that can run on clean-burning, affordable CNG; the company is on track to sell more than 15,000 such vehicles in 2014 The state of Oklahoma, its agencies and the city of Dallas have ordered a total of 321 Ford F-150 pickups that can run on compressed natural gas.

2020 Ford Explorer, Lincoln Aviator reportedly facing numerous QC issues

A lengthy report in the Detroit Free Press delves into a range of quality control issues confronting the 2020 Ford Explorer and its luxury platform sibling, the 2020 Lincoln Aviator. Freep says it's been following the issue for two months, tapping various unnamed sources for information on the automaker's unorthodox route to resolution. Seems the problem is Explorers and Aviators leaving the production line at the Chicago Assembly Plant with flaws in areas like the chassis, transmission and suspension, said vehicles trucked to Ford's Flat Rock Assembly Plant (FRAP) outside of Detroit for repair. The estimates range from 10,000 to 18,000 vehicles affected, numbers so high that Ford has sought help from Roush Engineering in nearby Allen Park, and brought workers and managers from other plants in the Midwest to FRAP to get vehicles repaired and shipped to dealers. Ford hasn't shared the nature of the problems with anyone outside the company, including dealers and customers. Freep's sources are said to include workers who have provided photos of certain vehicles and of tents used to house parts at the FRAP repair site. The Explorer chassis allegedly has an unidentified problem that engineers are using X-rays to diagnose, and the transmission is having problems sensing when it's in park or going into park. Both the Explorer and Aviator have come off the line with HVAC units that only blow hot air. And the Aviator's height-adjustable suspension enters failure mode for unknown reasons. These come on top of quotidian mishaps common to every new vehicle, but that are meant to be sorted in pre-production, like missing emblems and trim pieces. They also come on top of a recall in early August issued for the Explorer and Aviator concerning the instrument cluster and parking brake, and another at the end of August over rear seatbacks that could collapse in a crash. An automaker spokesperson told Freep, "Making updates to preproduction models based on all-new platforms as they roll off the assembly line – is standard industry practice." Except these aren't pre-production, these are early production vehicles that paying customers and dealers are waiting for, and some of the affected vehicles have been pulled off dealer lots. Dealers say they are fine waiting for the trucks to get sorted out, and they'd rather have Ford fix the problems before the SUVs go to customers.