2003 Ford Excursion Eddie Bauer Lifted 7.3l Diesel 4x4 Clean $699 Ship on 2040-cars

Auto blog

2015 Ford Mustang gets pricing, configurator and less weight than expected

It's here; it's finally here. No more speculating or looking at dealer order guides, the configurator for the 2015 Ford Mustang is finally online. That means you should put down whatever you're doing and build your new 'Stang. Weight data for the new model has also leaked out, and while there is an increase, it's less than previously rumored.
The basic V6 coupe carries a base price of $23,600, plus an additional $825 destination charge for all models. Upgrading to the 2.3-liter Ecoboost costs $25,170, and the Ecoboost Premium is $29,170. If you need a V8 in your life, the Mustang GT is $32,100 or $36,100 with the Premium package. That puts the starting price up about $1,000 over the previous generation for the V6, but the turbocharged four-cylinder starts about $1,400 less than the V6 Premium, which is no longer available. Prices for both V8 models jumped about $1,000, as well.
If you need the convertible Mustang, the V6 starts at $29,100, excluding destination, $1,590 more than last year. The Ecoboost Premium 'vert is $34,670, and the GT droptop is $41,600.

Project Ugly Horse: Part VI

Solid axle? What solid axle?
I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation.
This should not have gone this easily. Having a long and checkered history of simple projects punctuated by much wailing and gnashing of knuckles, I was fully prepared to embark on a seven-day journey down a rabbit hole of broken bolts, internet hearsay and consternation when I finally decided to lay hands on the '89 Mustang with the goal of relieving the car of its stock rear axle. Instead, it took less than a full morning's worth of work to carve the old 7.5-inch solid axle from its moorings and mock up something, well, different.

2014 Ford Transit unveiled in Chassis Cab and Cutaway versions

As a leader in commercial vehicles here in the US, we knew Ford wouldn't take too long to show off the chassis cab and cutaway versions of its 2014 Ford Transit van. Set to go on sale this fall, Ford already revealed the full-body version of the Transit, and now it has pulled the cover off exposed-frame models just in time to to compete against the all-new Ram Promaster.
The term "chassis cab" refers to models with a fully enclosed cabin used for box vans or rental trucks, while cutaway models leave the cabin open behind the B-pillars for a pass-through on vehicles such as Class C motorhomes or ambulances. Both will offer three wheelbase options (138, 156 and 178 inches), the choice of single or dually rear axles, and plenty of upfitter-friendly touches including a pre-wired body harness and multiple body mount locations.
The new design will also help make upfitting a little easier since the fuel filler is now built into the cab (just behind the driver's door). Those integrated fuel filler necks will serve to feed either a 3.7-liter V6, a 3.5-liter EcoBoost V6, or a 3.2-liter Power Stroke diesel. Transit chassis cab and cutaways will wear varying Gross vehicle weight ratings from 9,000 pounds to 10,360 pounds depending on spec.