on 2040-cars

Auto blog

2015 Ford Mustang prototype spotted on the street

Our trusty spy photographers have snapped the first photos of the 2015 Ford Mustang prototype out on public streets. With nearly every square inch of the machine covered in heavy camouflage, it's difficult to discern details, but we can see smallish horizontal headlamps at work in the coupe's nose. Ford has made it clear that modern lighting technology will allow the company to get away from large, expensive headlamp arrays in the near future, and the 2015 Mustang may very well be the first of the automaker's products to bow with the new tech. The philosophy was first displayed on the very attractive Evos Concept.
The extensive cladding doesn't extend all the way to the prototype's rockers in the instance, giving us a look at the heavily-sculpted sills. Overall, this test car looks considerably smaller than the current generation Mustang, and elements like a short front overhang and beefy dual-piston calipers give us plenty of hope for the future model. Of course, reports that the 2015 Mustang will bow with an independent rear suspension and EcoBoost power certainly don't hurt our feelings, either.

Ford car-camo artist works his craft on Australia's new Falcon XR8

Ford is among the kings of concealment when it comes to test cars. On one recent Mustang SVT mule, the automaker went to the extreme of putting baffles over the exhausts to hide how many there were. Sounds like a lot of work, right? In a new video, the Blue Oval has decided to take fans behind the scenes to show them what it takes to camouflage a prototype. In this case the subject was the recently unveiled 2014 Falcon XR8 for Australia.
Ford's prototype build coordinator Down Under has the very appropriate name of Neil Trickey, and it's his job to obfuscate the important bits of test cars to keep them out of spy shooters' camera lenses. Trickey calls his job a "dark art," and he shows off some of the tricks of his trade in the video. It turns out that the fabric we often see on mules is a type of lycra, but his team isn't above getting out a can of spray paint to conceal parts, too.
Scroll down to watch a video about a man who you probably wish could be a little worse at his job.

Ford cleans up painting process with cameras

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.