2010 Xlt Used 3l V6 24v Automatic Fwd Suv Premium on 2040-cars

Auto blog

Landau yachts: The history of Lincoln's Designer Series

The Lincoln Designer Series was introduced in 1976, at the end of the imposing Mark IV Continental generation. Four big-name fashion designers of the era – all-American country clubber Bill Blass, psychedelic Italian pattern-maestro Emilio Pucci, venerable French jewelry-maker Cartier, and a la mode French fashionista Hubert de Givenchy – were asked to slather their elegance on LincolnÂ’s personal luxury coupe. This experiment was a wild success. According to documents uncovered in the Lincoln archives – with the incomparable guidance of official brand historian Ted Ryan – the Designer series “accounted for more than 27% of Mark IV sales” shortly after its introduction. It was such a runaway hit, that it continued on throughout the even larger Mark V generation (incidentally, the longest coupe ever produced by Ford Motor Company), and didnÂ’t really peter out on these big two-doors until the early 1990s.   But the true history of the series well predates the era of opera windows, crushed velour and wire wheel covers. “If you take a step back even further, when Ford purchased Lincoln in 1922, Edsel Ford was put in charge of the company. But more than that, he helped establish the first design studio at Ford,” said Ryan. The basic Model T didnÂ’t take much design. Lincoln was different. Edsel is famed for his quote. “Father wanted to make the most popular car, I wanted to make the best.” The specific genesis of the Designer Series, however, came along as a result of a long-term personal connection with the marqueÂ’s first chairman. “Edsel Ford had a relationship with Cartier, and correspondence going throughout the 1920s and '30s,” Ryan said. “His personal cards and stationery were always ordered from Cartier.” This enduring link wasnÂ’t formalized until the late 1960s. “I found in product development files, in 1967, that Ford had gone to Cartier for a special 1970 Cartier Continental coupe,” Ryan said. According to internal documents, this package would include unique interior leather/cloth/vinyl surfaces and trim, modified dials, and a Cartier jewelry box, as well as golden plating on the steering wheel ornament, dial face ornaments, keys, C-pillar ornaments, door monograms, and dashboard plaque. “Think of that. A car that never was, that could have been,” Ryan said, wistfully. Some Cartier magic did get glossed on Lincolns in the late 1960s.

New Ford Police Interceptor tech protects cops' backsides

It was only a matter of time before law enforcement agencies would realize the potential of driver-assist technology for use in their Ford Police Interceptors, and, now that they have, those back-up cameras and radar systems won't be used just for parking, but for security, as well.
The surveillance mode system works when the camera or radar detects movement from behind the vehicle, and if it does when it's activated, an alarm will alert the officer inside the car, the driver's side window will roll up and the doors will lock, protecting the officer from an unwanted intrusion. The officer, of course, has the option to turn surveillance mode off, mainly in urban areas where pedestrians would constantly set the alarm off, and it can only be activated when the police car is in park.
Randy Freiburger, Ford's police and ambulance fleet supervisor, came up with the patent-pending idea when researching the needs of police officers and riding along with them, during which time he realized officers would be safer with an extra set of eyes watching the area behind their cars, especially at night or when they're completing paperwork, using the in-car computer or handling a radar gun. "Unfortunately, there are people with bad intentions who sneak up on police officers," he says.

Plug In 2014: ALTe ready to join Ford's EQVM to convert, sell F-150 PHEV [w/video]

It's been a while since we've checked in with ALTe and its plans to convert big work vehicles like the Ford F-150 into plug-in hybrids. So, when we saw a demonstration vehicle sitting outside the San Jose Convention Center at the Plug In 2014 Conference last week, we had to get a closer look. When we did, we realized that it's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. It's been quite some time since we've been in a Ride & Drive vehicle that was all beat to heck. The reason for the well-worn F-150 with 30,000 miles on it is that ALTe has been showing off its extended-range EV technology to lots of people all around the country, and Kyle Maki has been the man on the scene more often than not. "This one, I've taken all over the country," he told AutoblogGreen. "I've wore out that seat, I think. The only reason this one wasn't driven here was because we were in Charlotte [NC] last week and I didn't want to take a chance and not make it in time for this event." In other words, ALTe is out there, ginning up excitement for the idea of a plug-in hybrid Ford with an electric range of up to 40 miles and which can then continue on gas for another 360 miles at around about 25 miles per gallon. ALTe wants to not only convert new vehicles but it also offers retrofits for fleets that are happy with their current fleet. The company offers converted versions of the Ford E350 and E450 utility vehicles now but the near-mythical F-150 PHEV is still "coming soon." Yes, orders are now being accepted, but you will be forgiven if you think this is all happening on a slow time scale. There are simply a lot of things to do before ALTe can sell the truck. ALTe is currently attempting to join Ford's EQVM program, which is the electric version of the standard Qualified Vehicle Modifiers program. The QVM program requires coachbuilders to "be successfully evaluated by Ford Motor Company on criteria such as engineering, the manufacturing process, quality control, and adherence to Ford and Lincoln Divisions guidelines." Qualified applicants must also meet all applicable Federal Motor Vehicle Safety Standards, conform to Ford/Lincoln conversion guidelines and agree to be inspected annually as well as have a "commitment to continuous improvement." Maki has a simpler explanation. "It basically means you're a preferred supplier, a Tier 1, if you will," he said.