2012 Ford Edge Limited One Owner Very Clean Excellent Condition Contact Gordon on 2040-cars

Auto blog

Shelby GT350R offers first mass-produced carbon fiber wheels

In the world of race engineering, reducing total weight is good, but reducing unsprung weight is flippin' fantastic. That's the reason Ford is pushing the envelope in terms of technology for the Shelby GT350R's wheels. Joining the likes of Koenigsegg in the offering, Ford has teamed with Australian outfit Carbon Revolution to produce the CF rollers en masse for the first time. Destined for the hubs of the new Shelby GT350R, the new hoops weigh just 18 pounds each, versus the 33-lbs weight of a similar aluminum wheel. On top of slashing up to 60 pounds in unsprung weight, there's such a reduction in rotational inertia – 40 percent, versus aluminum wheels – that Ford actually has to recalibrate the magnetic ride control system and springs. Thanks to, we're guessing, scenes of crashed Formula One cars disintegrating and spewing shards of carbon fiber all over the track, Ford seems quite keen to do away with the idea that CF is strong, but brittle. The company conducted extensive shock testing, ramming a wheel into a curb at speed. According to the Blue Oval, the lightweight wheel allowed the suspension to respond so quickly that the impact was "greatly diminished," causing the tester to run the experiment again, thinking there'd been a mistake. After recording brake rotor temperatures of 900 degrees Celsius (over 1,650 degrees Fahrenheit, or well past the point that aluminum or magnesium would melt) during testing, Ford and Carbon Revolution actually redesigned the wheels to "a thermal standard more suitable for motorsports," by adding an "incredibly thin, nearly diamond-hard coating that reliably shields the resin from heat." The same process was used to protect engine turbine blades on the Space Shuttle. While the work by Ford and Carbon Revolution should make GT350R customers excited, the work being done here could have serious implications for performance cars in the future. That's the real takeaway here, and is something that should leave fans of all performance vehicles excited.

Ford recalling select Taurus, Explorer and Lincoln MKS models over fuel tanks

Ford is recalling certain 2012 Taurus, 2013 Explorer and 2012 Lincoln MKS models over fuel tank concerns. According to the National Highway Traffic Safety Administration, vehicles built between July 19, 2011 and March 15, 2012 may have been built with fuel tanks that have a "marginally sealed seam" on the side. Those seams may not provide the strength necessary to protect the tank from rupture during a collision. They may also leak. The recall covers a total of 3,037 vehicles. NHTSA says that leaked fuel, in the presence of an ignition source, could easily cause a fire.
Dealers will inspect the tanks and replace them as need be free of charge. Owners can expect to be notified once the campaign begins on or around April 22, 2013. You can read the full NHTSA recall notice below for more information.

Ford upgrade kit takes Focus ST to 275 hp and 296 lb-ft

If you drive a 2015 Ford Focus ST but are already jealous of the 345-horsepower 2016 Focus RS that's on the horizon, Ford Performance has a new upgrade kit that could be a great compromise. Developed by the Blue Oval experts at Mountune, the MP275 setup takes the hot hatch's output to 275 hp and 296 pound-feet of torque when running on 93-octane fuel. Those are gains of 23 hp and 26 lb-ft, respectively. Providing much of the kit's extra oomph is a recalibrated ECU with more aggressive engine mapping. The company claims that the upgrade also improves throttle response, and it keeps the Focus ST 50-state emissions legal. In addition, customers get a Mountune high-flow intercooler, a new air intake, and all of the necessary hardware to mount the components in the engine bay. For those concerned about reliability, when an authorized Ford Performance technician installs the parts, the Focus maintains the factory warranty. The MP275 kit currently retails for $1,900 on the Ford Performance website. For added protection during harsh weather, customers can also get an end cap for the cone air filter for $15. Related Video: Ford Performance Upgrade Kit for 2015 Focus ST Boosts Output to 275 Horsepower, 296 Lb.-Ft. Torque • Ford Performance mountune Focus ST kit for 2015 optimizes performance without sacrificing reliability • Sold through Ford Performance Parts, the kit maintains the base car's factory-backed three-year/36,000-mile warranty • Package adds 23 horsepower and 26 lb.-ft. of torque DEARBORN, Mich., Aug. 18, 2015 – Focus ST customers can get more performance out of their vehicle thanks to a new kit from Ford. And on that front, the new Focus ST mountune upgrade kit delivers in spades. The idea of a street-legal, reliable, largely stock 2.0-liter four-cylinder engine making nearly 300 lb.-ft. of torque might have seemed ludicrous 10 years ago, but the components of the MP275 Focus ST performance upgrade not only combine to produce up to 296 lb.-ft. of torque with 93-octane fuel, they are designed for maximum reliability as well. "The 2015 Focus ST MP275 upgrade is the latest addition to Ford Performance's vast Focus and Fiesta performance catalog that gives enthusiasts the components they need to take their car to the next level," said Adam Gair, product manager, Ford Performance.