Ford E350, page #44

Auto blog

Detroit 3 and UAW set for showdown over tiered wages

This week, thousands of United Auto Workers will converge on Cobo Center in Detroit for the Special Convention on Collective Bargaining, an every-four-year event that lets members tell UAW leaders what the negotiating priorities should be during contract negotiations. This is where a lot of sand and a lot of lines start coming together in preparation for contract negotiations between the UAW and the Detroit 3 automakers, which will happen later this year. Number one on the UAW agenda is the end of the two-tier wage system created in 2007 to help the automakers get through bankruptcy; veteran workers are paid the Tier 1 rate of around $29.00 per hour, new hires are paid the Tier 2 rate of between $15 and $20 and get about half the benefits of Tier 1. Tier 2 hiring has been an undoubted success for the automakers, allowing them to keep factories in the US and hire more workers. By agreement, it is capped at a certain percentage of each automaker's workforce, and while the union's ultimate position is to get rid of the dual-scale system entirely; one leader said Ford could easily afford the $335 million it would take to convert all its workers to Tier 1 out of its $6.9 billion in 2014 North American profit, and General Motors could do the same out of the $5 billion it is handing to investors through the (admittedly forced) share buyback. Other delegates say that at the very least they'd be happy with enforcement of the current caps in the new contract. The automakers, conversely, would welcome expansion of the Tier 2 ranks. Including benefits, import automakers pay workers "in the high $40 range" per hour, according to an analyst, while Ford and GM pay about $59 in wages and benefits per hour. More Tier 2 workers on the rolls would let those two companies get labor cost parity with the competition. Fiat-Chrysler pays wages closer to the imports because of special exceptions in its UAW contract that allow unlimited Tier 2 hiring; those exceptions will end on September 14 and bring FCA into line with the other domestics, unless the new contract maintains them. FCA CEO Sergio Marchionne is opposed to the two-tier system, having called it "almost offensive." One analyst says the UAW might win a sizable pay raise for Tier 2 and a small increase for Tier 1, but the keystone issue will be how the hiring matrix can help the automakers keep overall wages in line with the imports.

Inside the Ford GT's interior

Ford has crafted a simple yet high-tech interior for the GT supercar, which has been on display at auto shows around the world this year. The instrument panel has a two-tier design with a floating wing. There are soft-touch materials and carbon fiber, which also is used for the passenger cell. Still, the GT's interior has been shrouded in more mystery than the rest of the car. To cast some light on the GT's cabin, we caught up with Ford design vice president Moray Callum, who explained the ins and outs of the future icon's interior. Put simply, "there's not a lot of excess materials," Callum said. But what is there is pretty cool. In case you haven't heard, Ford plans to launch the GT in 2016. It will run a mid-mounted twin-turbo EcoBoost V6 paired with a seven-speed dual-clutch gearbox and make extensive use of carbon fiber for the body structure. Related Video:

2015 Saleen 302 Black Label Mustang unveiled with 730 horsepower

The last time Saleen made these pages it was to report that the firm was out of money. However, just before that announcement, the tuning specialist told us about the three Saleen 302 Mustangs it was developing at three levels - White Label, Yellow Label and Black Label, with those latter two trims to put out 640 horsepower and 565 pound-feet of torque. Well, the Black Label is here - don't let the California Sunset paint fool you - and it's more powerful than planned, with 730 hp and 600 lb-ft blasted out of a 5.0-liter Coyote V8 hooked up to a twin-screw supercharger. Saleen says it's the most powerful, refined, and advanced Mustang it has ever built. Keeping all that power on the road is the increase in downforce that comes from a body that's been extended one inch in front and two inches in the back, and the wing suspended over the decklid. The stock suspension is refitted with Saleen S4 springs, shocks, swaybars and bushings, and the 20-inch wheels on 275-section rubber hide 15-inch dimpled rotors. The interior gets the requisite frills in leather and contrasting stitches, as well as new gauges and badging. It'll take $73,214 to open the door, but just $2,015 to put down a deposit. For more info, check out the press release below. Related Video: 2015 Saleen 302 Black Label Mustang March 15, 2015 -- Earlier this year, Saleen Automotive released their 2015 White and Yellow Label 302 Mustangs to much fanfare. To round out their fleet, Saleen pulled out all the stops and developed one of the best Mustangs to date. This car is set to change the way pony cars are looked at from here on out. At a one-of-a-kind event in Downtown LA, Saleen raised the curtain on the latest pony car out of their Corona, CA headquarters. "Since I started building cars in 1984 my goal has always been to go above and beyond where anybody has been before", said Steve Saleen. "This will by far be the most refined and advanced Mustang we have built to date." With over 30 years of experience in both racing and manufacturing vehicles, it was only a matter of time before Saleen built a Mustang as comprehensive and technologically advanced as the 2015 302 Black Label. Power Saleen combined the reliability and potency of the 5.0L Coyote motor with a twin-screw supercharger. The pair produces the most power from a production Mustang yet at 730 horsepower and 600 lb-ft of torque on 91 octane gas.

Recharge Wrap-up: Daimler spending big for fuel cells, Ford Go!Drive experiment advances

Ford's Go!Drive experiment is entering its beta phase in London. The project, which is one of the automaker's global smart mobility experiments, uses a mobile app for on-demand carsharing of Ford Focus Electric and Ford Fiesta vehicles. The beta phase involves increasing the number of available vehicles from 20 to 50, and collecting new data from users. The program offers one-way rentals and guaranteed parking, with no membership fees and a cost of 26 cents per minute. Ford hopes to get 2,000 drivers involved in the program. Read more at Green Car Congress. Daimler will invest billions of dollars to upgrade the Mercedes-Benz Unterturkheim plant over the next few years. This year alone, it plans to spend $1.06 billion. The company expects cost savings "in the range of hundreds of millions of euros until 2020," while maintaining its workforce of 18,700 employees and adding 150 vocational training positions. The upgrades will allow the plant to become a center for building more efficient engines, hybrid powertrains and fuel cell systems. "Alternative drive systems are an important element of our future mobility," says Mercedes-Benz's Markus Schafer. "Their share of automotive production is set to steadily rise over the next few years, complementing our highly efficient engines within the portfolio. This is what we have laid the groundwork for today." Read more at Reuters, or in the press release below. The Department of Energy is providing $20 million in funding for the development of more efficient high speed industrial motors and drives. Ditching old motors and gearboxes for ones that use integrated power electronics could help decrease the energy consumption of the industrial sector, which currently uses more than 25 percent of the electricity generated in the US. The projects being funded will reduce losses and decrease the size of drive systems used in industries like petroleum refining and natural gas, which could affect the lifecycle efficiency of transportation fuels. Read more at Energy.gov.

Ford secures Microsoft for software updates

Ford is dropping Microsoft later this year as its infotainment partner when the Blue Oval switches to the BlackBerry QNX operating system for Sync 3 (pictured above). However, the two companies aren't severing ties completely, because the Redmond, WA, outfit is taking responsibility for Sync 3's wireless updates. Don Butler, Ford Director of Connected Vehicles and Services, announced the deal during a speech, according to Automotive News. "We've obviously had a good, long relationship with Microsoft," he said. "Microsoft understands the automotive environment and the kinds of experiences that we'd like to enable." The ability for Sync 3 to accept Wifi updates was announced as a major feature the new infotainment system, but this was the first mention of how that has been handled. Ford will host the files on Microsoft's Azure Cloud servers, according to Automotive News. Owners will need to give permission to check for new software, and they'll be notified after an improvement's installation. Dealers will install Wifi transmitters to keep vehicles on the lot up to date, as well. Sync 3 is set to replace the much-maligned MyFord Touch later in 2015 on some 2016 model year vehicles, and by next year it should be available throughout the Ford and Lincoln lineups. In addition to the wireless updates, the new system also promises a simplified interface, better voice recognition and faster response times. Ford Motor Company is preparing for vehicle ownership and user experiences of the future with the creation of a global cloud based Ford Service Delivery Network enabling new ways for consumers to interact with cars. Teaming up with Microsoft, Ford will expand connected services for customers around the world using the globally scalable and reliable Azure Cloud infrastructure. Ford and Lincoln owners will benefit from the convenience of new connectivity services keeping them better informed and in control of their vehicle at all times with the expanded availability of features like scheduled remote start, vehicle finder, and vehicle status (fuel or charge level, tire pressure). Building the Ford Service Delivery Network (SDN) on the Microsoft Azure platform enables a common platform for Ford to bring new features and services to market faster, quickly scale up for global implementation, and remain flexible for the future. Starting later this year, the Service Delivery Network will first enable over-the-air software updates for SYNC 3.

Watch Vaughn Gittin Jr. hit the ice in his 2015 Mustang RTR

There's more than one way to get a car to drift. You can set up a purpose-built drift car. Or you can put a car on a slick surface. But in this case, Vaughn Gittin Jr. has done both. In this latest video, the driftmeister extraordinaire reveals the new livery for his 2015 Ford Mustang RTR, and put it on a frozen track, flanked by snow banks. It's the perfect place to drift any car, and this custom pony car could very well be the perfect drifter. Call it a match made in heaven. A cold, frozen-over slice of heaven where rear-drive muscle cars put on one heck of a show. Gittin, for those unfamiliar, is one of the drifting scene's foremost showmen, and like Ken Block or Tanner Foust, he competes primarily in Blue Oval machinery. Vaughn will be challenging the Formula Drift series once again in the Mustang RTR, but whether the sideways-driving championship is coming to a circuit near you or not, you can scope out a piece of the action right here.

Livestream: Ricardo Innovation & Sustainability Symposium 2015

Making decisions on how to invest billions of dollars in future technology is scary even if you're developing something as simple as a smartphone. But when you've got to invest that money in something as complex as a car – one that might drive itself, or operate just on electricity, or even possibly be crash-proof – that task becomes daunting. Today, at 9:00AM, a slate of auto industry leaders are gathering at automotive supplier Ricardo to celebrate the company's 100-year anniversary by looking toward the future. Moderated by Autoblog Editor-in-Chief Sharon Carty, the panel will talk about Ford's vision for the future, look at battery development, environmental issues, and may even debate the future of flying cars. Maybe. If you're interested in following along, take a look at the livestream. Government/Legal Green Ford Technology Emerging Technologies Videos ricardo Sakti3

Want to buy a brand-new 1964 Ford Mustang? [w/video]

Even in its current iteration, the Ford Mustang is not without its share of heritage design cues. But if it's a more classic look of the first-gen pony car you're after, combined with modern levels of equipment, Revology just might have the answer. The Orlando-based company makes what you might call "continuation" Mustangs, using replica steel bodies made by Dynacorn and licensed by Ford to give it that classic look, but with modern technology. Under the skin you'll find a 5.0-liter fuel-injected V8 with 265 horsepower and either a five-speed manual or four-speed automatic transmission, but the powertrain is just the start. It's also got a MacPherson strut suspension, disc brakes, power steering and a cabin equipped with such modern accoutrements as power door locks and seats, keyless entry, intermittent wipers, even Bluetooth connectivity. And it's all covered by a one-year, unlimited-milage warranty, plus five-year corrosion protection and three-year powertrain warranty. Of course none of that comes cheap, as a turnkey Revology Mustang will set you back at least $119,500, in the buyer's choice of fastback or convertible body-styles. The first example was unveiled at the Amelia Island Concours d'Elegance this past weekend, with the first customer examples set for delivery next year. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery Revology Mustang View 17 Photos News Source: Revology Cars via Carscoops Ford Convertible Coupe Classics replica continuation revology

Bring back the Bronco! Trademarks we hope are actually (someday) future car names

Trademark filings are the tea leaves of the auto industry. Read them carefully – and interpret them correctly – and you might be previewing an automaker's future product plans. Yes, they're routinely filed to maintain the rights to an iconic name. And sometimes they're only for toys and clothing. But not always. Sometimes, the truth is right in front of us. The trademark is required because a company actually wants to use the name on a new car. With that in mind, here's a list of intriguing trademark filings we want to see go from paperwork to production reality. Trademark: Bronco Company: Ford Previous Use: The Bronco was a long-running SUV that lived from 1966-1996. It's one of America's original SUVs and was responsible for the increased popularity of the segment. Still, it's best known as O.J. Simpson's would-be getaway car. We think: The Bronco was an icon. Everyone seems to want a Wrangler-fighter – Ford used to have a good one. Enough time has passed that the O.J. police chase isn't the immediate image conjured by the Bronco anymore. Even if we're doing a wish list in no particular order, the Bronco still finds its way to the top. For now (unfortunately), it's just federal paperwork. Rumors on this one can get especially heated. The official word from a Ford spokesman is: "Companies renew trademark filings to maintain ownership and control of the mark, even if it is not currently used. Ford values the iconic Bronco name and history." Trademarks: Aviator, AV8R Company: Ford Previous Use: The Aviator was one of the shortest-run Lincolns ever, lasting for the 2003-2005 model years. It never found the sales success of the Ford Explorer, with which it shared a platform. We Think: The Aviator name no longer fits with Lincoln's naming nomenclature. Too bad, it's better than any other name Lincoln currently uses, save for its former big brother, the Navigator. Perhaps we're barking up the wrong tree, though. Ford has made several customized, aviation themed-Mustangs in the past, including one called the Mustang AV8R in 2008, which had cues from the US Air Force's F-22 Raptor fighter jet. It sold for $500,000 at auction, and the glass roof – which is reminiscent of a fighter jet cockpit – helped Ford popularize the feature. Trademark: EcoBeast Company: Ford Previous Use: None by major carmakers.

Daily Driver: 2015 Ford Flex

The Ford Flex has been around. It's not T-Rex or even Model T old, but still; it's been hauling people and stuff since 2008 without a major redesign. That's quite a long time in the car world. Sales have been sliding the last couple of years, and the Flex is now considered a niche player in the crossover-centric US auto market. But that doesn't mean it's still not a pretty good vehicle for its purpose: If you need to haul people and stuff, there are few better choices. Some even think it's a guilty pleasure. I spent a winter afternoon tooling around suburban Detroit in a handsomely equipped Flex Limited. We're talking the 3.5-liter EcoBoosted V6 with 365 horsepower and all-wheel drive. Inside, there were big comfy seats, lots of leather, acres of storage space and even a built-in refrigerator. The drive ended up being surprisingly fun. If there's such a thing as a hot-rod minivan, this is it. I also got noticed. The Flex's boxy design has aged well. It's still polarizing, but there aren't many contemporary vehicles that look like a Flex. So if you've ever seen a Flex on the road, and thought: "Man, that thing is big. I wonder what it's like to drive that?" Now's your chance to find out.