Ford COE BANDIT, page #19

Auto blog

2020 Ford Escape plug-in vs. Toyota RAV4 Prime, Mitsubishi Outlander PHEV: How they compare on paper

This year is when the entry-level plug-in crossover market really starts to heat up. Both Ford and Toyota have new models in the 2020 Ford Escape and the 2021 Toyota RAV4 Prime. They join the segment veteran Mitsubishi Outlander PHEV, which has been available in the U.S. since the 2018 model year. And of course that means it's time to look at how the numbers add up while we wait for our chance to drive the new competitors. You can find a chart with all the details immediately below, followed by more detailed analysis. Powertrain One of the key factors for any hybrid, particularly plug-in models, is how little fuel they use. Overall, the Ford Escape is the winner with 100 mpg-e, the fuel economy equivalency for the vehicle when assessing it with a full battery. The Toyota is close behind with 94 mpg-e. We're expecting the Escape to also be a bit more efficient when running only on gas, as it reportedly gets 41 mpg. The RAV4 will likely get 40 mpg, or possibly slightly less, since the non-plug-in RAV4 Hybrid achieves 40 mpg combined. Running solely on electric power, though, the RAV4 edges out the Escape with 42 miles of range versus 37. Behind both of them is the Mitsubishi with just 22 miles of range, 25 mpg on gasoline only, and 74 mpg-e with a full battery. One unique feature the Mitsubishi claims is DC fast charging capability, meaning 80% of its electric range can be restored in just 25 minutes, possibly allowing for more electric use depending on where you're driving it. While fuel economy is a priority for hybrids, customers won't want to compromise on other features. The Toyota is easily the least compromising, as it returns impressive range and efficiency while also providing a whopping 302 horsepower and all-wheel drive. The Mitsubishi also has all-wheel drive, but a comparatively paltry 190 horsepower. The Ford produces slightly more power at 200, but is front-wheel-drive only. While low in comparison to the RAV4 Prime, the Mitsubishi and Ford have very competitive output to many comparably-sized conventional crossovers with base engines, such as the Honda CR-V, Chevy Equinox and others. Size and space Naturally one of the reasons for buying a crossover is for its practical shape for comfortable hauling of people and stuff. In this regard, all three crossovers are very close. The Escape wins out with legroom, the Toyota with shoulder room. Headroom is split between the Toyota and Mitsubishi.

There's an impending shortage of new trucks in America's heartland

URBANDALE, Iowa — Jerry Bill is worried the novel coronavirus could hurt business at the Des Moines auto dealership he runs, but not because of a shortage of buyers for the big Ram pickups on his lot. "Our biggest issue will be if we don't get more inventory," said Bill, general sales manager of Stew Hansen Chrysler Dodge Jeep Ram, which sells around 2,700 new vehicles a year in Urbandale, a suburb of Iowa's capital Des Moines. After a drop in sales in April when consumers stayed home, Bill expects pickup truck sales to end May similar to where they were a year earlier. And if demand remains strong, Bill said he will run out of popular models in June. Fiat Chrysler began slowly restarting Ram truck assembly lines on Monday after a two-month shutdown. The U.S. economy contracted in the first quarter at its sharpest pace since the Great Recession of 2007-2009 because of lockdown measures aimed at slowing the spread of the coronavirus. Economists warn the second quarter will be much worse. Still, far from the lockdowns of states like New York, Michigan or Ohio, dealerships like Stew Hansen have provided FCA and Detroit rivals General Motors and Ford a rare bright spot: strong sales of pickup trucks in America's heartland. Overall U.S. sales of cars and light trucks crashed to the weakest pace in 50 years last month. But sales of big Detroit brand pickups, particularly in southern and western states less affected by the outbreak, significantly outperformed the market, industry executives and analysts said. Pickup trucks are one of the most profitable automotive segments in the world. They account for a huge portion of the Detroit automakers' profits and formed a huge lure for Peugeot, which expects to merge with FCA by early 2021. The pressure is now on to boost pickup truck production and send vehicles to dealers in parts of the country with dwindling supplies. That is particularly true for GM, which is running short of certain truck models after losing 40 days of production to a strike last fall. "If you don't have what someone wants, they can choose to go to another brand," said Cox Automotive analyst Michelle Krebs. 'Easiest swap ever' Detroit automakers in March rolled out large discounts — such as interest-free loans for seven years — to keep vehicles rolling off dealer lots.

Watch as U.S. auto industry springs back to life after lockdown

WARREN, Michigan — The Detroit Three automakers and their suppliers began restarting assembly lines on Monday after a two-month coronavirus lockdown in a slow revival of a sector that employs nearly 1 million people in the United States. On a chilly and damp Monday morning, hundreds of workers at Fiat Chrysler Automobile's (FCA) truck plant in Warren, Michigan, began lining up before 4 a.m. to start the 5 a.m. shift. Signs overhead read: "Let's restart." "I'm a little nervous," said Larry Smith, 53, of New Baltimore, who works on wheel alignment away from the assembly line. "They made all the precautions (and) they've done everything they can to prepare us ... I'm trusting in God." Detroit automakers on Monday said there were no issues with absenteeism as the plants opened. FCA reopened four U.S. assembly plants on Monday, including Warren Truck, on a single shift, as well as four parts plants. The reopening of car plants will be a closely watched test of whether workers across a range of U.S. industries can return to factories in large numbers without a resurgence of infections. General Motors Co, Ford Motor Co and FCA have all been preparing for weeks to reopen their North American factories in a push to restart work in an industry that accounts for about 6% of U.S. economic activity. Investors welcomed the gradual restart, sending GM's shares up more than 9% on Monday. FCA shares rose 7.3%, while Ford's were up 6.7%. Auto companies have redesigned assembly lines and retrained workers in an effort to avoid coronavirus outbreaks that could derail production again. Workers entering factories on Monday were checked by temperature monitors. Face masks or shields are standard protective equipment. Jobs such as installing seat belts that used to require two or more workers to get close together inside a vehicle have been redesigned to keep people a safe distance apart. Plastic screens have been installed along assembly lines to separate workers leaning in to the engine compartments of vehicles. Break areas have been reconfigured to keep workers six feet apart. The Detroit automakers have collaborated with each other and with the United Auto Workers to develop common coronavirus safety practices. Other automakers in the United States are adopting similar safety measures.

All eyes on Detroit as automakers prepare for slow, careful reopening of plants

DETROIT — The U.S. factories that make Fords, Chevys and Jeeps are coming back to life this week as workers install new safety equipment and wake up machines ahead of the high-stakes restart the Detroit automakers plan to launch on Monday. Ford, General Motors and Fiat Chrysler Automobiles all plan to reopen North American factories on May 18. The reopening of the U.S. auto sector will be a closely watched test of whether workers across a range of industries can return to factories in large numbers without a resurgence of COVID-19 infections. How well the automakers do will be significant for the U.S. economy, as nearly 1 million workers are employed in the sector. Executives at Ford and GM said separately this week the companies have not recorded any cases of COVID-19 transmission in plants outside the United States since adopting new safety protocols. Those procedures include mandatory face masks, separation of workers on assembly lines, frequent cleaning of work areas and requirements that workers pass through temperature monitors and report any symptoms before entering a plant. The Detroit Three have taken unprecedented steps to share information about coronavirus safety practices and develop a common set of workplace standards for their restarts, working with the United Auto Workers union, executives said. "We thought it was critical that we did it together," Ford manufacturing and labor chief Gary Johnson told Reuters. "We've never done this as an industry." The Detroit automakers will restart U.S. plants without regular testing of workers, because they do not have access to sufficient testing capacity, executives and UAW officials said. They will test workers who report COVID-19 symptoms or have fevers discovered by temperature scanners installed at factory entrances. "We have to continue to push for this testing," United Auto Workers union Vice President Cindy Estrada told Reuters on Wednesday. "Unless we have testing weekly to keep sick people out of the plant there is always a risk." Adopting new safety practices is just part of the work the companies must do to reopen after an extraordinary shutdown that has lasted two months.   Wave zero At Ford, workers going in to ready factories are part of what Chief Operating Officer Jim Farley calls "wave zero." The work of wave zero employees "is really important for success of the startup," he said in an interview.

The 1965 Ford Mustang could have looked a lot different

The 1965 Ford Mustang is unquestionably an automotive design icon, and nearly every generation of Mustang has some connection to that original car. Because it's such a universally-known vehicle, we were amazed to see all the different designs that were being considered. Head of Ford's archives Ted Ryan recently shared photos of design proposals for the original Mustang on Twitter that he and Jamie Myler found, and we reached out to them to find out more. As Ryan initially noted, the photos were taken on August 19, 1962, and they are proposals for the Ford Mustang. Apparently Ford had committed to doing a Falcon-based youth-oriented car at this point, and it did have plans to launch the car in 1964 for the 1965 model year. But after having little success with early design proposals, the company asked all of its design studios — the Advanced Studio, Lincoln-Mercury Studio and Ford Studio — to submit proposals. With only about two years before the planned launch, Ford was understandably short on time, and it's believed that the studios only had a month to create and present these designs. Lincoln-Mercury design proposal View 8 Photos The majority of the designs, a total of five, came from the Advanced Studio, and part of this was because they already had a couple of concept designs in reserve it could present. Two other models representing three design possibilities came from Lincoln-Mercury, and just one model with two options came from Ford. The Advanced Studio proposals are shown in the gallery at the very top of this article, and the Lincoln-Mercury and Ford proposals are in the gallery directly above this paragraph. The Advanced Studio's most radical design is the one that was clearly related to the Mustang I concept that would be shown later that year with huge wraparound rear glass, turbine-inspired bumpers and enormous side scoops. The other proposals from the studio were more conservative, featuring simple lines, grilles reminiscent of the Falcon, and one even borrowing the jet-thruster-style taillights made famous on the Thunderbird. Lincoln-Mercury had some impressively bold designs, particularly its fastback that had buttresses to extend the shape all the way to the tail. This car had two different side trim possibilities. The other Lincoln-Mercury design was toned down a bit, but had two interesting possibilities for side detailing, as well as some crisp, low-profile tail fins.

Michigan Gov. Gretchen Whitmer says manufacturing can reopen May 11

Michigan Governor Gretchen Whitmer on Thursday said the state's factories can reopen next Monday, May 11, removing one of the last major obstacles to North American automakers bringing thousands of laid-off employees back to work amid the coronavirus pandemic. While reopening the manufacturing sector, Whitmer also extended her state's stay-at-home order by about two weeks to May 28, citing a desire to avoid a second wave of COVID-19, the respiratory illness caused by the novel coronavirus. “WeÂ’re not out of the woods yet, but this is an important step forward," Whitmer said in a statement. "As we continue to phase in sectors of our economy, I will keep working around the clock to ensure our businesses adopt best practices to protect workers." This week, General Motors and Fiat Chrysler Automobiles said they were targeting resuming vehicle production in North America on May 18, but suppliers would need time to prepare ahead for that date. Ford has not said what date it is targeting. The governor previously extended the state's coronavirus stay-at-home order through May 15, but had lifted restrictions for some businesses. Neighboring Ohio had allowed manufacturing to resume this past Monday, putting pressure on Whitmer to follow suit. Michigan's shutdown had stymied efforts by the Detroit Three and rival automakers to restart vehicle assembly anywhere in the United States, because so many critical parts suppliers are based in the state. Automakers and their suppliers already have begun gearing up for a possible resumption of work at their U.S. plants, but needed the official go-ahead from Whitmer. Industry officials had been pressing Whitmer to allow suppliers to reopen starting May 11 so the automakers could resume operations on their target date. They also wanted the green light so they can press Mexico to open its auto sector as suppliers there are also critical for the industry restart. The automakers' plans were tacitly approved on Tuesday by the United Auto Workers union, which represents the Detroit automakers' hourly U.S. plant workers. The union had previously said early May was "too soon and too risky" to restart manufacturing. Under Whitmer's new order, factories must adopt measures to protect workers, including daily entry screening, no-touch temperature screening as soon as possible and use of protective gear like face masks. Automakers have already rolled out such policies.

Chevy, GMC and Ram dealers are worried they'll run out of new pickups

One of the unexpected side effects of the ongoing coronavirus pandemic is a shortage of pickups at Chevrolet, GMC and Ram dealers. Supplies are running out, and the factories that build these trucks remain closed. Stores across the nation began increasing incentives in March, when the first stay-at-home orders were issued, in a bid to continue luring buyers into showrooms. They also launched online sales channels, or expanded their existing digital business. Sales nonetheless plummeted in April 2020, but in-demand vehicles, like the Ram 1500 and the Chevrolet Silverado, are still selling relatively well thanks in part to the aforementioned incentives. Pickups outsold sedans for the first time in April 2020, according to The Detroit News, by 17,000 units. The problem is that General Motors, Fiat Chrysler Automobiles (FCA), and Ford temporarily closed their factories in March. "The pipeline is very dry," said Mike Maroone, the CEO of a large dealership group named Maroone USA, in an interview with Automotive News. He told the publication his Chevrolet stores are sitting on a 30-day supply of the Silverado, which is one of America's best-selling vehicles. "That is a problem for us," he concluded. Coronavirus-related lockdowns and factory closures compound problems already faced by dealerships who represent General Motors-owned brands. They entered 2020 with a thinner inventory than a year earlier due to the 40-day United Auto Workers (UAW) strike that paralyzed the company late in 2019, and the 0%, 84-month offers announced in March have sapped supply. Ram wasn't affected by a strike, but it has relied heavily on generous incentives to move trucks off lots. Ford, on the other hand, limited incentives to 2019 models. Inventory levels differ greatly from region to region. The national average for the Silverado stood at an 82-day supply in March 2020, down from 120 in March 2019. Ram stores had a 114-day supply of the 1500 (compared to 134 a year earlier), while Ford bucked that trend with a 111-day supply versus 84 in 2019. Don't panic if you're in the market for a truck; we're not facing a complete drought. Automotive News added that America's light-duty pickup inventory could fall to 400,000 units by the end of May, and drop further to 260,000 units in June. For context, there were about 700,000 light-duty trucks in stock in May and June of 2019. That's unquestionably a sharp drop, but there will still be over a quarter of a million trucks to choose from.

Ford applies to trademark term 'Lincoln eGlide'

There's an epilogue to Ford's recent announcement that it's giving up on a battery-electric Lincoln co-developed with Rivian. The MachEClub forum discovered that just a week ago, Ford applied with the U.S. Patent and Trademark Office to trademark the term "Lincoln eGlide." The goods and services category details use for "Motor vehicles, namely, passenger automobiles, sport utility vehicles, electric vehicles and structural parts and fittings; electric vehicles, namely, passenger automobiles, sport utility vehicles, and structural parts and fittings." Living in an age where a small "e" is shorthand for "electric," and Ford having specified electric vehicles in the patent, the go-to guess is that this is for an electric vehicle. The inclusion of non-electric motor vehicles injects a little fuzziness. Tesla's trademark on the Model S specifies "electric automobiles" only, whereas Rivian's trademark for the R1T seeks coverage for "land vehicles" and just about every part found in or on a land vehicle.   Since Ford must have known about the end of the Rivian effort when it applied for the trademark, we suppose Lincoln has got some kind of eGlide coming no matter what. Lincoln refers to the theme of its latest cabin designs, as in the Aviator and Corsair, "Quiet Flight," and the road-scanning adaptive suspension on the Lincoln Aviator is called "Air Glide," neither term being trademarked. This leads our suspicions to eGlide becoming a vehicle component that could potentially serve a model with any powertrain, not necessarily battery-electric only, and eGlide won't be the name of the Lincoln EV that Ford says is still on the way. Another clue is that Ford included the word "Lincoln" in the term. Trademarked vehicle names such as Aviator and Corsair don't include the make, but services for vehicles do, such as the trademarks for Lincoln Connect and Lincoln Co-Pilot 360. We'll admit that a little bit of hope informs this line of thinking as well. Ford having done Lincoln the fabulous service of giving Lincolns terrific names, we'd be aghast if the Corsair and Navigator had to share showroom space with an eGlide. We've no choice but to wait for a retail product to provide answers. In the meantime, if we could just get to the bottom of this "Fastor Charge" trademark, and what's this bit about "Vandemonium?"   Related Video:        

GM, Ford and Fiat Chrysler set target date for restarting production

The parking lot stands empty at Fiat Chrysler's sprawling Belvidere, Ill., assembly plant. / Getty Images   General Motors, Ford and Fiat Chrysler Automobiles are targeting May 18 to resume some production at their U.S. factories after shutting down plants in March due to the coronavirus outbreak, the Wall Street Journal reported. Executives from the companies in recent days tentatively settled on the timeline following talks with United Auto Workers (UAW) leaders and Michigan Gov. Gretchen Whitmer's office, the Journal said on Monday, citing people familiar with the plans. The head of the UAW union last week warned it was "too soon and too risky" to reopen auto plants and Michigan's economy in early May, citing risks to workers. The companies are working with the union on drawing up safety protocols for reducing exposure risk for workers, but haven't finalized those terms yet, according to the WSJ report. GM, Ford, Fiat Chrysler and UAW did not immediately respond to Reuters requests for comment.   Plants/Manufacturing Chrysler Fiat Ford GM coronavirus

UAW warns automakers: Restarting U.S. plants is 'too soon and too risky'

WASHINGTON/WARREN, Mich. — The head of the United Auto Workers union on Thursday said it was "too soon and too risky" to reopen auto plants and Michigan's economy in early May, citing insufficient scientific data and coronavirus testing to assure workplaces are safe. The warning from UAW President Rory Gamble on Thursday afternoon came as General Motors Co , Ford Motor Co and Toyota Motor Corp took new steps toward reopening North American vehicle manufacturing operations in an environment where consumer demand is uncertain and worker safety paramount. The union has said that 24 of its members have died from Covid-19, though it was unclear whether they might have become infected in the workplace. Unionized Detroit automakers and non-union German and Asian automakers have been preparing to restart U.S. vehicle making operations by early May. Companies have shifted reopening dates amid uncertainty about government stay-at-home orders. Gamble's statement appeared to derail plans by the Detroit Three to start bringing UAW workers back to vehicle manufacturing jobs on May 4. The longer the automakers cannot produce profitable U.S.-made trucks and sport utility vehicles, the longer they burn cash. The UAW leader's statement was also aimed at Michigan Gov. Gretchen Whitmer, who has come under pressure from conservative groups and President Donald Trump to ease coronavirus stay-at-home restrictions. "At this point in time, the UAW does not believe the scientific data is conclusive that it is safe to have our members back in the workplace. We have not done enough testing to really understand the threat our members face," Gamble said. "We strongly suggest to our companies in all sectors that an early May date is too soon and too risky to our members, their families and their communities." Gamble said the union was "happy with the auto companiesÂ’ response and cooperation on working through the health and safety protocols we will need in the workplace when it is appropriate to restart." Earlier Thursday, GM began notifying front line managers to come back to work next week to get trained on new safety protocols designed to prevent the spread of the novel coronavirus as workers return to plants.