1971 Ford Early Bronco Frame Off Restoration Modified 4x4 V8 on 2040-cars

Auto blog

Woman trades 1914 Model T in for 2013 Corvette

We're sure that dealers must see all sorts of interesting trade ins, but this one may take the cake. Red River Chevrolet in Bossier City, Louisiana, recently had a customer come in with an odd request. Tina Boyter wanted to trade in three vehicles on a brand-new 2013 Chevy Corvette. Among the hardware was 1980 Corvette, a 1978 Cadillac Eldorado and a 1914 Ford Model T. While the '80 Corvette had been her personal car for years, the '78 Eldorado had belonged to Boyter's mother before she traded up to a Lincoln. The big Caddy had just 10,290 miles on the clock when it was traded in.
And the Model T? Boyter says the car was built as a racer by Ford, and that it had been a show winner for years when it belonged to her father. But, after spending the last 16 years in a museum with its fluids drained, Boyter decided it was time to shed some of the past. She walked into the dealer, laid eyes on a white 2LT Corvette with a red interior and offered to trade all three of the vehicles in on the sports car.
Why not wait for the C7? "I fell in love with that one when I walked in the door," She said. We can't fault her there.

Ford and Lincoln recall roundup: Explorer, F-350 Super Duty, Aviator

Ford and Lincoln released information on a flurry of recalls this morning. There are three in total, and they span different models and separate issues. Those models include the 2013-17 Ford Explorer, 2020-21 Lincoln Aviator and 2020-21 Ford F-350 Super Duty. We’ll organize these three in order of most cars recalled. 2013-17 Ford Explorer This recall includes a substantial 774,696 vehicles, of which 676,152 are in North America. Why? Ford says these vehicles “may experience a seized cross-axis ball joint that may cause a fractured rear suspension toe link.” The diminished steering control that would follow could increase the likelihood of a crash, Ford states. Only vehicles that spent time in high corrosion states should be affected, Ford says. That means places that lay salt down, experience cold weather and high humidity. Owners of these vehicles will need to take their car into the dealership, where it will be inspected to determine if it needs work. If so, Ford will replace the cross-axis ball joint/knuckle, then replace the toe links with a newly-designed part. Notifications to owners of these vehicles are scheduled to be sent out the week of August 23.  WeÂ’ll note that Ford is reporting six “allegations of injury” related to this issue. For those who donÂ’t live in the high-corrosion states/their car was never registered in those states, Ford is offering a customer satisfaction program in case you were interested in having the work done anyway. 2020-21 Lincoln Aviator Lincoln is pulling back 40,995 new Aviators due to an improperly secured battery cable wire harness. This recall applies to gasoline-only versions of the Aviator, so Grand Touring PHEV buyers neednÂ’t worry. The wire harness may contact the AC compressor pulley due to it being secured improperly. Ford says that over time, the pulley could rub through the wire harnessÂ’ insulation, resulting in a short circuit and ultimately a fire. However, Ford is not currently aware of any injuries or fires related to this concern as of now. When you bring your car in, the dealer will inspect all the parts to determine what needs to be done. Fixes range from a basic tie strap to keep the harness away from the pulley (if it hasnÂ’t made contact yet), to replacement of the wire harness and AC belt if the contact has caused damage. Owners should expect to be notified the week of July 30 if their Aviator is involved in the recall.

2017 Ford F-150 Raptor desert testing heats up

In case there was any doubt, Ford is taking the development of the second-generation SVT Raptor very, very seriously. The Blue Oval recently completed over 1,000 miles of testing in the boiling heat of the American southwest. Apparently, that mileage was accrued over a 66-mile route designed to mimic the torturous terrain encountered by racers in the Baja 1,000 off-road race. The prototypes, which were built from a mix of existing and next-gen Raptor components, were tested with "fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches." Ford claims the new truck managed to run the circuit 25-percent faster than the current F-150 SVT Raptor, averaging 50 miles per hour while going as fast as 100 mph in stretches. That said, Dearborn didn't release any dedicated times, so it's unclear just how quickly the 66-mile stage was completed. We do know that durability was a big part of the testing. Ford claims each lap was completed by what sounds like a pretty significant jump, with the trucks ascending a steep ramp onto a two-foot plateau and then completing a step-down to level ground. We have to take Ford at its word here, though. "Steep" can mean any number of things, and we've no idea just how fast the trucks were hitting the ramp or how much air they got. Hopefully, the jumps were aggressive enough to prevent future frame issues. Still, Ford boasting about how rough the Raptor's testing is can be taken as a positive sign for fans of the next-generation of SVT's rugged pickup. NEW F-150 RAPTOR WRAPS UP INITIAL DESERT DURABILITY TESTING DEARBORN, Mich., July 7, 2015 – The 2017 F-150 Raptor – Ford's toughest, smartest, most capable off-road truck ever – recently completed more than 1,000 miles of testing in the southwestern United States. Over 1,028 miles of desert trail designed to parallel the Baja race course in Mexico, the 66-mile route featured a wide range of surfaces including fast sandy washes, deep-rutted silt beds, steep climbs in deep sand, and slow meticulous crawls through tight trenches. The truck topped speeds of 100 mph in places, slowing to 10 mph in others, for an average speed of approximately 50 mph. The 2017 Raptor is 25 percent faster than the current truck based on lap times. At the end of each lap, the new Raptor completed a tabletop jump consisting of a steep ramp up to a two-foot plateau, then a step-off back to level ground.