1967 Ford Bronco Classic Fully Restored 4wd 302 V8 Amazing Condition Show 'n Go! on 2040-cars

Auto blog

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

Ford debuts Fusion NASCAR racer that edges closer to stock [w/video]

The sixth-generation NASCAR Sprint Cup racecar, which will make its competition debut at the 2013 Daytona 500 this weekend, marks the closest thing to a "stock car" that the sport has seen in more than 20 years. No longer using just stickers to distinguish the different brands, the image above shows the lengths NASCAR and automakers went in order to create a racecar design that more closely resembles the individual cars they represent.
Ford, one of the more open and vocal OEMs regarding the Gen6 car's development, is giving us a closer look at its racing version of the Fusion with a pretty revealing side-by-side comparison with last years' racer (click above for an expanded view). Aside from the more realistic front end and production-like body lines, the overall shape, dimensions and proportions have also been designed to give the racecar a more stock appearance. Most of the new racer was designed by the Ford Design Center, which the automaker says was the first time it has been so involved in the design process since the 1960s. Of course, one area the Sprint Cup Fusion really differs from the production Fusion is its Ford Racing 5.8-liter V8 producing around 850 hp. Can you say Fusion SVT?
Scroll down for a quick video from Ford Racing showing a production Fusion morph into a Cup car.

Ford rolls out diesel Focus ST at Goodwood [w/poll]

If you're in the market for a hot hatch, there are some excellent choices at your disposal - especially if you live in Europe. But if you want a diesel, well, your choices become rather more limited. Volkswagen tends to that niche market with the Golf GTD (essentially an oil-burning version of the GTI available Stateside), but that's about the extent of it. The pleas of those looking for more diesel-burning hot hatch choices haven't fallen on deaf ears at Ford, with the Blue Oval not only rolling out a facelifted gas-powered Focus ST at the Goodwood Festival of Speed this weekend, but also a new diesel version as well.
The diesel Focus ST (which we hope and pray isn't marketed as the STD) packs a 2.0-liter turbodiesel four producing 182 horsepower and 295 pound-feet of torque to propel the oil-burning hot hatch to 62 in 8.1 seconds en route to a top speed of 135 miles per hour. With less power and only slightly more torque, that makes the diesel Focus ST considerably slower than the gasoline one, which packs 252 hp and 270 lb-ft, runs to 62 in 6.5 seconds and tops out at 154 mph, but (in a testament to how far particulate filters have come) the diesel model cuts carbon emissions by nearly a third compared to the petrol version and returns about 50-percent better fuel economy, which makes that much more of a difference in markets where diesel is already priced better than gasoline at the pump.
For buyers who wouldn't consider anything other than a diesel, it also represents 23-percent more power than the previous top-level diesel Focus. The VW Golf GTD, for reference, offers up 181 hp (just 1 horse less), 280 lb-ft (15 fewer torques) but is somehow estimated to reach 60 in a considerably fleeter 7.4 seconds.