Fiat 850, page #9

Auto blog

Fiat 500X Pop gets Sport Appearance Package

At last November's L.A. Auto Show, Fiat debuted a new trim for the 500X compact crossover, the 500X Sport. Attempting to add a "youthful, sporty appearance" to the 500X lineup, the Sport model included the new Rovente Red color, shed the dark molding and cladding on other trims, and adopted new exterior elements like fog lights and dual chrome-finished tailpipes. The model hasn't made it to the Fiat USA site yet, but Mopar Insiders says there is more sportiness on the way for the 500X. The base Pop trim will get a Sport Appearance Package to inject some exterior pizzazz at for thousands less than the price of the Sport model. The package add the front and rear fascias from the Sport model, front fog lights, body-colored wheel arch moldings and side sills, 18-inch aluminum sport wheels, dark gray accents throughout, and "dual bright exhaust tips." As far as we can tell, the Pop with the Sport Appearance Package differs outside from the proper Sport trim by retaining the halogen projector headlights, fitting darker fog light housings, and being limited to 18-inch wheels. The standard Pop only comes with 17-inch wheels, the standard Sport trim with an 18-inch wheel but it offers an optional 19-inch wheel wrapped in Michelin rubber. Also, major options on the Pop don't change, meaning it won't offer the choice of a black roof as on the Sport trim. The Sport trim makes a host of changes to the inside, too, which the Sport Appearance Package doesn't. Buyers can order the jaunty overhaul for the Pop in four colors: Bianco White, Grigio Moda, Italia Blue, and Rovente Red. The Sport Appearance Package will cost $795, meaning one could get out for $27,030 after destination but before taxes and fees. The Sport trim was announced with an MSRP of $29,390, making it the second-most-expensive 500X in the range, above the $27,740 Trekking, below the $30,990 Trekking Plus. The Sport Appearance Package has not appeared on the Fiat USA configurator yet, but it shouldn't be far off.  Update: A previous version of this story incorrectly stated the Sport trim was not on the Fiat USA configurator. Only the Sport Appearance Package hasn't appeared yet. The mistake has been corrected. Related Video:    

UPDATE: GM, Ford, FCA, Honda shutting down all North America plants

Following an earlier report that General Motors, Ford and FCA would take action to curtail the potential spread of the Coronavirus, news comes today that the three American automakers will instead close all North American plants for an unknown period of time. Ford said in a statement that it "is temporarily suspending production at its manufacturing sites in North America to March 30 to thoroughly clean its facilities to protect its workforce and boost containment efforts for the COVID-19 Coronavirus." General Motors followed with a statement confirming that its suspension "will last until at least March 30," and adding that the situation will be reevaluated from week to week after that. FCA has not yet issued an official statement. Rory Gamble, president of the United Auto Workers union, praised the news. "This will give us time to review best practices and to prevent the spread of this disease," Gamble said in a statement. According to the Associated Press, around 150,000 workers are "likely to receive supplemental pay in addition to unemployment benefits." The United Auto Workers had asked the automakers to reconsider their position on Wednesday, a day after the parties agreed to slow production at U.S. plants and limit the number of workers on the job at one time to prevent the spread of the virus, a source who asked not to be identified told Reuters. The UAW’s new request for the closure of the Detroit Three automakersÂ’ U.S. plants came after Honda said on Wednesday it was temporarily shutting its North American plants for six days because of the anticipated decline in consumer demand. Plants/Manufacturing UAW/Unions Chrysler Fiat Ford GM coronavirus

Fiat Chrysler halts European production as coronavirus hits demand

MILAN — Fiat Chrysler Automobiles (FCA) is halting production for two weeks at most of its European plants to help protect staff against the coronavirus pandemic and adjust to a slump in demand, the Italian-American carmaker said on Monday. Italy has been the European country worst hit by the crisis and the first to enforce a nationwide lockdown, which has now been replicated by Spain and, to a lesser extent, by France as the virus sweeps through the continent. With all non essential services closed, including car dealers, and people forced home except for strict working needs, many forecast a heavy fall in car sales in March. FCA — which according to analyst estimates produces around 25% of its vehicles in Europe — said the suspensions through March 27 would allow it "to effectively respond to the interruption in market demand by ensuring the optimization of supply." Ferrari, meanwhile, said it closed its two plants until March 27. Ferrari said it had so far ensured production continuity, and it already implemented all the health measures decided by the Italian government at the two sites, in hometown Maranello and in Modena. But it was "now experiencing the first serious supply chain issues, which no longer allow for continued production." Marco Opipari, an analyst at Fidentiis, said a few weeks of closures was not a big problem in an over-supplied European auto industry and lost production could be recovered later on. "The real problem is on the demand side, people are not buying cars now, and sales volumes are expected to be very bad in March, with a real impact on automakers' earnings," he said. FCA said in a statement that production for its FCA Italy and luxury Maserati units would stop for two weeks, extending a temporary closure period already planned for some Italian facilities. Affected plants are Melfi, Pomigliano, Cassino, Mirafiori, Grugliasco and Modena in Italy, Kragujevac in Serbia and Tychy in Poland. The FIOM union said FCA's decision was "necessary". The carmaker said the freeze would help it to resume activity promptly once market conditions allow it. "The group is working with its supply base and business partners to be ready to enable our manufacturing operations to deliver previously planned total levels of production despite the suspension when market demand returns," it said.

GM, Ford, FCA and the UAW form joint coronavirus task force

General Motors, Ford and Fiat Chrysler are forming a coronavirus task force along with the United Auto Workers union to improve protections for their employees and limit the spread of the highly contagious virus. The task force, which would be focusing on areas including vehicle production plans, is being headed by UAW President Rory Gamble, GM Chief Executive Officer Mary Barra, Ford CEO Jim Hackett, Ford Executive Chairman Bill Ford and FCA CEO Michael Manley, the parties said in a joint statement on Sunday. Though automakers typically schedule plant staffing to allow for a certain proportion of absent workers, according to industry consultants, if the outbreak causes higher levels due to infection or workers staying home to care for children whose schools are closed, that could lead to reduced production or in extreme cases shutdowns. Production at an FCA assembly plant in Canada was halted for 24 hours after employees there refused to work on Thursday over fears of an employee being possibly exposed to the coronavirus. Separately on Thursday, the Italian-American automaker said that one of its employees had tested positive for COVID-19, a respiratory disease caused by the new coronavirus, at its transmission plant in Indiana. The plant, however, remained open. "This is a fluid and unprecedented situation, and the task force will move quickly to build on the wide-ranging preventive measures we have put in place," the CEOs of the three companies said in the statement. The task force would also be focusing on aspects such as health and safety education, health screening, food service at the automakers' locations. Related Video: Government/Legal Plants/Manufacturing UAW/Unions Chrysler Fiat Ford GM coronavirus

FCA's puzzling trademark spree includes Apache and Orange Peelz

Here's one for the Mystery Machine. As noted by the WagoneerFans forum and picked up by Motor1, Fiat Chrysler recently went on a one-day trademark application spree at the U.S. Patent and Trademark Office. On March 6, the automaker applied for the names Apache, Farout, Orange Peelz, Shocker, Tomahawk, and Top Dog. All have been requested for "Land vehicles, namely, passenger automobiles," and the best guess so far has them being applied to concepts during next month's Easter Jeep Safari, which, assuming it goes ahead, will happen April 4-20. As for historical ties, one name has a connection to Dodge, another was a codename for a Dodge engine, and one was used on a previous Easter Jeep Safari concept. Tomahawk rings the loudest bell, that name applied to the four-wheeled, Viper-engined concept motorcycle that Dodge rolled out at the 2003 Detroit Auto Show. The company supposedly sold nine examples of the "rolling sculpture" through Neiman Marcus over a four-year period. It doesn't appear FCA has used the name since, internally or otherwise. There is, however, a Cherokee tomahawk — not referring to a Jeep, but the light, short-handled ax used by the Native American Cherokee tribe. This one seems made for Safari use. Apache has a Dodge and a Jeep tie-in. At one time, Apache was the codename for the 6.4-liter Hemi V8 marketed as the 392 V8 on the Charger and Challenger R/T Scat Pack trims. That engine makes 485 horsepower and 475 pound-feet of torque. But Jeep showed a Wrangler Apache concept (pictured) at the 2012 Easter Jeep Safari, built with a Mopar conversion kit for a 6.4-liter Hemi making 470 hp and 470 lb-ft. Mopar sold the V8 swap kits at least through 2016, but they appear to have fallen off the Mopar menu. At one time there were rumors of a supercharged Apache with more than 600 horsepower, and wouldn't that be a welcome surprise in Moab. The Farout could be a more or less extreme overlanding take on last year's Easter Jeep Safari Wayout concept, depending on whether one considers "way" or "far" more radical. The Shocker, Jeep might be disappointed to discover, already has an outside link in the Jeep Shocker stickers made for Wichita State fans who love America's 4x4. As for Orange Peelz, it's pretty close to Pedro's bicycling degreaser called Oranj Peelz, but a Jeep conception could be anything. Except maybe a paint color. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

FCA worker in Indiana tests for coronavirus, but the plant will stay open

Fiat Chrysler Automobiles NV said Thursday that an employee has tested positive for COVID-19 at its Kokomo, Indiana, transmission plant, but the location will remain open. The Italian-American automaker said the company placed the employee and his immediate co-workers and others he may have come into direct contact with in home quarantine. The automaker said it is “deploying additional sanitization measures across the entire facility, re-timing break times to avoid crowding and deploying social spacing.” Fiat Chrysler is canceling all in-person meetings unless “business critical” and conducted meetings through video conferencing technologies. Automakers also have canceled non-essential travel. Ford, meanwhile, said its plants in North America remain unaffected. General Motors spokesman Jim Cain said the Detroit automaker has not had any cases of the coronavirus in its North American plants yet, citing such measures as reduced travel and restricted entry to plants as helping. How the No. 1 U.S. automaker would respond to a positive test would depend on the situation, he added. “You do plan to operate with a certain amount of absenteeism, but every facility has a different operating plan,” he said. The Fiat side of the FCA operation, meanwhile,  is temporarily halting operations at some plants in Italy and will reduce production rates in response to coronavirus in the country, the largest outbreak in Europe, a spokesman for the automaker said on Wednesday. FCA said in a statement it had stepped up measures across its facilities, including intensive sanitation of all work and rest areas, to support the government's directives to curb the spread of the infectious disease. "As a result of taking these actions the company will, where necessary, make temporary closures of its plants across Italy," it said. The spokesman said affected plants were Pomigliano, Melfi, Atessa and Cassino, each of them halted for two or three days between Wednesday and Saturday. FCA said that to allow greater spacing of employees at their workstations, "daily production rates will be lowered to accommodate the adapted manufacturing processes." However, a source close to the matter said FCA did not expect an impact on overall production rates. The source added that temporary closures were in no way linked to disruptions of auto parts supplies following anti-virus measures imposed by Rome all over Italy.

Fiat Chrysler U.S. sales chief Reid Bigland steps down after suing company

DETROIT — Fiat Chrysler's head of U.S. sales is leaving the company after a bumpy career that saw him file a whistleblower lawsuit over a scheme to pay dealers to report fake sales numbers. The company says in a statement that Reid Bigland will leave Fiat Chrysler April 3 after 22 years with the company. He'll pursue other interests. Bigland also headed the Ram brand and Fiat Chrysler Canada. During his tenure the company saw big U.S. sales growth, mainly with the Jeep and Ram brands. But his career was marred by the sales scandal, which forced Fiat Chrysler to restate numbers and pay $40 million to settle a complaint with the U.S. Securities and Exchange Commission. Terms of BiglandÂ’s departure werenÂ’t announced, but the company said all legal matters with Bigland “have been resolved to the satisfaction of all parties involved.” FCA CEO Mike Manley thanked Bigland for his service in a company statement. “We all wish him every success in his future endeavors,” Manley said. Bigland said in the same statement that that itÂ’s been a privilege to work at FCA and with the companyÂ’s dealers. Last June, Bigland sued Fiat Chrysler alleging that it withheld 90% of his pay package because he testified in the SEC inquiry of sales reporting practices. He alleged that Fiat Chrysler Automobiles violated Michigan's Whistleblower Protection Act, retaliating against him because he testified in the probe of whether the company inflated sales and deceived stockholders. The company withheld Bigland's 2018 long-term incentive stock payout, special dividends and an annual bonus in retaliation for his testimony and because he sold some stock, according to the lawsuit. Documents say the dividends alone are worth about $1.8 million. In September Fiat Chrysler agreed to pay $40 million to settle an SEC complaint alleging that the company misled investors by overstating its monthly sales numbers over a five-year period. The company inflated sales by paying dealers to report fake numbers from 2012 to 2016, the SEC alleged in a complaint. Fiat Chrysler agreed to pay the civil penalty and to stop violating anti-fraud, reporting and internal accounting control regulations, the SEC said. The automaker did not admit or deny the agency's allegations. Fiat Chrysler said it has reviewed and refined its sales reporting procedures. The SEC said the automaker boasted about a streak of year-over-year sales increases into 2016, when the streak actually was broken in September of 2013.

Second-generation Fiat 500 grows up, goes electric, gets posh

Going to the design well to reinvent an icon is difficult, especially when it's one of your greatest hits, so Fiat walked a thin line as it developed the first new 500 since 2007. Unveiled online, the hatchback is just as huggable as its predecessor — which is sticking around — and it honors tradition while embracing cutting-edge technology. Motorists long nourished on a diet of value-packed, bargain-priced Fiat models are in for a rude surprise. The new 500 rubs elbows with respected luxury cars, at least on paper, and it has morphed into more of an Instagram-friendly fashion statement than a genuine people's car. Stylists brought its retro-inspired design into the 2020s without completely reinventing it. It's still shaped like the 500 you're familiar with, though it's a little bit longer and wider than before and its wheelbase gains about an inch. Its front fascia wears a unmissable 500 emblem flanked by bright trim, its headlights are mounted higher and integrated into the hood, and its door handles are chiseled into the body. Out back, the vertical lights return with a more sculpted design. The line-up will ultimately include the quasi-convertible shown here, a hardtop, plus a wagon called Giardiniera and envisioned as a modern interpretation of the eponymous long-roof sold from the 1950s to the 1970s. Bigger changes welcome the passengers into the cabin. The driver sits behind a two-spoke steering wheel and a configurable, 7.0-inch digital instrument cluster, while a 10.25-inch touchscreen propped up on the dashboard displays a new version of the well-regarded Uconnect infotainment system. It looks decidedly more upmarket than the 500 it replaces, though it's difficult to tell without seeing in person and sitting in it — thanks, coronavirus. Fiat made the new 500 all electric, all the time. It's built on a 42-kilowatt-hour lithium-ion battery pack that zaps a 118-horsepower electric motor into motion. Its maximum driving range checks in at 199 miles, though the Italian firm obtained that figure by putting its city car through the optimistic WLTP testing cycle. It takes nine seconds to reach 62 mph from a stop, it has a 93-mph top speed, and plugging it into an 85-kilowatt charger fills 80% of the battery in 35 minutes. Alternatively, you'll need to wait 14 hours for a full charge if you plug it into the same household-spec outlet you use to keep your phone and your laptop juiced up.

1960s Fiat 500F becomes 960-piece Lego Creator Expert kit

Properly restored, the rear-engined Fiat 500 released in 1957 is worth more than most late-model front-engined examples. Lego is making it more accessible by adding a 1960s 500F model to its Creator Expert line of kits. This isn't the first Lego Fiat 500 we've seen, but we're not sure if this official one is related to the unofficial one we last saw back in 2018. The 960-piece set measures about four inches high, nine inches long, and four inches wide, meaning it will take up quite a bit of space on your desk. Lego recreated the 500's proportions with surprising accuracy, and its designers included details like the round headlights, the chromed emblem on the front fascia, the dish-shaped hubcaps, and the vented rear decklid. It's not as realistic as a die-cast model, but it's recognizable as a 500. Opening the hood reveals the gas tank and the spare tire — just like on the real car. Lego has thankfully left out the rust that tends to develop in the battery tray, which is right behind the front fascia. Both doors open to reveal a three-spoke steering wheel with a Fiat logo, a moving gear selector, a handbrake lever you can raise and lower, as well as a folding soft top — again, just like on the actual 500F. Lower the decklid to find the Danish firm's best rendition of Fiat's air-cooled twin, which in real life develops 18 horsepower and 22 pound-feet of torque in the 500F. Zero to 60 mph (its top speed) optimistically takes about a minute if you're on flat ground with a favorable tail wind. The replica's zero-to-60-mph time depends on what you're carrying it in. It totes a suitcase on its back everywhere it goes, and the kit includes a painting of a 500 in front of the Coliseum propped up on an easel. Lego will release its Fiat 500 on March 1. Sold online and through authorized retailers, it's priced at $89.99, which makes it a bargain compared to a vintage one. The catch is that you can't take it out for gelato. If you'd rather invest in one you can drive to cars and coffee, there's a 1967 500F just like the one Lego offers in its kit listed in the Hemmings classifieds for the princely sum of $29,500, or about $27 per pound — yikes. Related Video: Featured Gallery Fiat 500F Lego kit View 14 Photos Toys/Games Fiat

Peugeot maker PSA posts record profits ahead of FCA merger

PARIS — Peugeot maker PSA Group said its profitability reached a record high in 2019 but the French carmaker forecast falling industry sales in Europe this year as it pursues its merger with Fiat Chrysler, which is strong in North America. PSA has trimmed costs in areas such as the procurement of components as it has integrated its acquisition of Opel and Vauxhall, boosting operating margins to 8.5% last year. The group, which also produces cars under the Citroen and DS brands, offset a slump in vehicle sales by selling pricier SUV models, with launches including the Citroen C5 Aircross helping to lift revenues by a higher-than-expected 1% to $81.2 billion (74.7 billion euros). That helped it stand out in a car market where some rivals including France's Renault have struggled with sliding revenues and profits, amid a broader downturn in demand. PSA's group net profit increased 13.2% to a record 3.2 billion euros, and the company increased its dividend against 2019 results to 1.23 euros per share, up 58% from 2018 levels. The carmaker was "once again very solid", analysts at brokerage Oddo-BHF said in a note, adding the results confirmed the company's "best-in-class status." However PSA forecast a 3% contraction in Europe's car market this year, by far its biggest market. The tie-up with Fiat Chrysler will help it gain exposure to that group's strong presence in North America with brands like Jeep. The two companies struck a deal in December to create the world's No.4 carmaker, to better cope with market turmoil and the cost of making less-polluting vehicles. Fiat also posted more upbeat results than most rivals this year. CORONAVIRUS WEIGHS PSA boss Carlos Tavares told a news conference that the two groups were both in good shape and well placed to face market challenges together. He said he did not expect any major regulatory hurdles to the merger, adding it had so far submitted 14 approval requests to competition authorities out of the 24 it needs. There are no immediate plans to change anything in the large portfolio of brands within the combined group, he added. However the companies still face problems this year, including the coronavirus outbreak which has paralyzed production in China and hits carmakers' supply chain. PSA said the coronavirus impact was still difficult to assess. It factories in Wuhan, at the epicenter of the outbreak, are due to reopen in the second week of March.