2012 Fiat 500 Pop Hatchback 1.4l Salvage Runs! Economical Only 6273 Miles L@@k!! on 2040-cars
Salt Lake City, Utah, United States
For more inventory go to SUPERAUTOUS.COM We are able to ship our inventory across the country and around world We are pleased to offer this 2012 Fiat 500 that is damaged (please take a look at pictures for current damage) this loaded Fiat is the perfect project vehicle and does run in lot, which means it can be driven on to a transport truck or trailer since it is currently damaged!. We can offer Domestic and International shipping arrangements, please take a look at the pictures for more details and don't pass up the opportunity to own this builder for a fraction of the price as the listing can be ended any second due to local buyers!!!! This Vehicle has a Salvage Certificate and currently not registered. The buyer will have to register it in his state of residence, which may or may not involve some extra steps compared to registering a clean title car. THIS VEHICLE IS TO BE PICKED UP FROM UTAH SALT LAKE CITY 1899 SOUTH REDWOOD ROAD, S.L.C,UT ALL SALES THROUGH UTAH DEALER This vehicle is being sold as is ,where is with no warranty of any kind. We are a bonded dealer and do have to do all necessarily documents so charge 150 dollars document fee on each and every vehicle. This vehicle is located in SALT LAKE CITY,UTAH, 84104 we can arrange shipping anywhere in the world! BEFORE CALLING READ THE FAQ'S ANY QUESTIONS OR CONCERNS PLEASE CALL/TEXT/SMS/EMAIL 801-300-8766 FAQ'S -we are not a repair facility and have no estimates -for additional pictures, please inspect or send any inspector -"lot drive" means the vehicle can be driven on a transport truck or trailer as it is a damaged vehicle and legally not street worthy. -NO FINANCING -Deposits- are 1000 dollars by credit card or paypal and balance you can pay in person or send a wire transfer to our dealer. -Deposits give you 5 days to pay balance or deposit will be lost -we can assist with shipping internationally but will not answer any questions on shipping. until you purchase the vehicle as prices change daily. IF YOU HAVE ANY QUESTIONS PLEASE CALL 801-300-8766(Before you call or email please read Faq's below) or email us at sales@superautous.com!!!!!! PLEASE TAKE A LOOK AT ALL THE PICTURES THAT ARE PROVIDED AS EVERYONE REPAIRS IN DIFFERENT WAYS,SO IT IS UP TO YOU ON WHAT YOU WOULD REPLACE OR REPAIR ON THE VEHICLE. THE PICTURES ON THE WEBSITE ARE ALL THE PICTURES WE HAVE AND IF FOR ANY REASON YOU NEED ADDITIONAL PICTURES PLEASE SEND A INSPECTOR OR COME INSPECT THE VEHICLE,AS WE DO NOT HAVE ANY REPAIR ESTIMATES.WE ALSO DO NOT SELL PARTS OFF THE VEHICLES THAT ARE REBUILDERS , AS ONE OF THE LEADERS IN THE SALVAGE INDUSTRY WE TRY AND PRICE ALL OUT VEHICLE'S RIGHT TO NOT PLAY AROUND IN THE PRICE,SO IF YOU HAVE A LOW BALL OFFER DO NOT BOTHER AS WE TRY TO PRICE OUR VEHICLES RIGHT. WE HAVE A VERY HIGH CALL VOLUME ON ABOVE QUESTIONS , SO THANK YOU VERY MUCH FOR TAKING THE TIME TO READ THIS BRIEF DISCLOSURE AND GOOD LUCK ON YOUR BUILDER!! Payment Details -Deposit Due within 12 hours of buy now -Final Payment due within 5 days -pickup required within 5 days from payment -NO FINANCING OR TRADE IN WHAT SO EVER. NEW BUSINESS HOURS Monday - Friday: 8:00 am - 5:00 pm Saturday - Sunday-CLOSED |
Fiat 500 for Sale
2012 fiat 500 sport hatchback 2-door 1.4l
2012 fiat 500 abarth 1.4l turbo 160hp - fun car!
Pop azzurro blue low miles low price manual transmission 1-owner warranty stick(US $12,500.00)
2012 fiat 500
Fiat 500 very low miles (2013) salvage(US $12,995.00)
2013 fiat 500 abarth cabrio convertible 2-door 1.4l(US $26,500.00)
Auto Services in Utah
Willey Honda ★★★★★
The Junk Car Buyer ★★★★★
Schneider Auto Karosserie Body & Paint ★★★★★
Patterson`s Auto ★★★★★
Henry Day Ford ★★★★★
Harrisons Mobile Auto Repair ★★★★★
Auto blog
All eyes on Detroit as automakers prepare for slow, careful reopening of plants
Thu, May 14 2020DETROIT — The U.S. factories that make Fords, Chevys and Jeeps are coming back to life this week as workers install new safety equipment and wake up machines ahead of the high-stakes restart the Detroit automakers plan to launch on Monday. Ford, General Motors and Fiat Chrysler Automobiles all plan to reopen North American factories on May 18. The reopening of the U.S. auto sector will be a closely watched test of whether workers across a range of industries can return to factories in large numbers without a resurgence of COVID-19 infections. How well the automakers do will be significant for the U.S. economy, as nearly 1 million workers are employed in the sector. Executives at Ford and GM said separately this week the companies have not recorded any cases of COVID-19 transmission in plants outside the United States since adopting new safety protocols. Those procedures include mandatory face masks, separation of workers on assembly lines, frequent cleaning of work areas and requirements that workers pass through temperature monitors and report any symptoms before entering a plant. The Detroit Three have taken unprecedented steps to share information about coronavirus safety practices and develop a common set of workplace standards for their restarts, working with the United Auto Workers union, executives said. "We thought it was critical that we did it together," Ford manufacturing and labor chief Gary Johnson told Reuters. "We've never done this as an industry." The Detroit automakers will restart U.S. plants without regular testing of workers, because they do not have access to sufficient testing capacity, executives and UAW officials said. They will test workers who report COVID-19 symptoms or have fevers discovered by temperature scanners installed at factory entrances. "We have to continue to push for this testing," United Auto Workers union Vice President Cindy Estrada told Reuters on Wednesday. "Unless we have testing weekly to keep sick people out of the plant there is always a risk." Adopting new safety practices is just part of the work the companies must do to reopen after an extraordinary shutdown that has lasted two months. Â Wave zero At Ford, workers going in to ready factories are part of what Chief Operating Officer Jim Farley calls "wave zero." The work of wave zero employees "is really important for success of the startup," he said in an interview.
Fiat Chrysler working on an inline-six to replace the Pentastar V6?
Fri, Sep 21 2018Get out your Skeptics Hat for this one and keep it close by. Allpar cites "reliable sources" to write that Fiat Chrysler appears to be working on a new inline-six engine to be slotted into company products around the globe. The purported engine would be based on the 2.0-liter Global Medium Engine inline-four. Allpar first reported on the potential development in February 2017 and has filed a few updates since then, one citing "internal communications referring to a GME T6" — the "T" meaning turbocharged. It's said that some engineers have changed their online resumes to reflect their focus on the new motor. Apparently, FCA tried adding forced induction to the Pentastar V6 but didn't like the results. The new direction then turned toward a "compact straight-six." In at least one guise, the GME I-6 would come in at just under three liters in order to escape taxes on engines 3.0-liters and above in certain European markets; the 2.0-liter four-cylinder has an actual displacement of 1.995 liters. The present V6 Pentastar comes in 3.2-liter and 3.6-liter guises; a turbocharged 3.0-liter straight-six should be able to replace both as far as output. Hooking up to the company's eTorque system used on the 3.6-liter Pentastar and 5.7-liter Hemi would make things even more punchy. With the trend in truck engine downsizing, it wouldn't be crazy to see such an engine head straight to Ram. The four-cylinder GME unit serves in the Alfa Romeo Giulia and Stelvio, and Jeep Cherokee, Wrangler, and Grand Commander. The big Alfa Romeos and full-size Jeep and Ram models shouldn't have any problem with a longer inline engine. Maserati, which doesn't use the Pentastar engine, could be a candidate as well should it choose to step away from its Ferrari-developed engine cred. Speaking of Ferrari, the Italian brand is working up a new V6 based, in its words, on "a very, very particular architecture." It isn't clear where it will go or if one of the other Italian brands will get access to it, but the Allpar piece says the Ferrari V6 will be based on the core GME architecture for Maserati. Chrysler gave up its last inline-six 11 years ago when the 4.0-liter I-6 retired alongside the JK-series Jeep Wrangler. The engine format is back in vogue, and its reincarnations have received good reviews. But inline-sixes are generally longer, hence FCA's focus on a compact unit, and that could limit the purported engine's placement options.
Mercedes-AMG GT 63 S 4-Door and Fiat 124 Spider Abarth | Autoblog Podcast #596
Fri, Sep 27 2019In this week's Autoblog Podcast, Editor-in-Chief Greg Migliore is joined by Senior Editor, Green, John Beltz Snyder and Associate Editor Joel Stocksdale. This week, they focus on the cars they're driving, starting with the hardcore, four-door Mercedes-AMG GT 63 S. Then they move on to the aging Lexus GX 460 and the plucky Fiat 124 Spider Abarth. They discuss the practical-yet-luxurious Lincoln Nautilus, as well as the state of Lincoln as a whole (did you hear it just got a new design boss?). Finally, they help pick a modern vehicle for someone with a hankering for the look of the classic Ford Bronco. Autoblog Podcast #596 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown 2019 Mercedes-AMG Four-Door GT 63 S 2019 Lexus GX 460 2019 Fiat 124 Spider Abarth 2019 Lincoln Nautilus Spend My Money Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.