1994 Dodge *only 31,118 Miles* on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Top torque-to-weight ratios under $100k, $50k and $25k

Horsepower may steal a lot of headlines, but the always-more-complex torque figure is often a critical one for both the workingman and the motoring playboy. The measure of rotational force represents the twist that can liquefy one's tires or haul one's horse trailer. Good stuff.
It follows then, that as with the horsepower-to-weight list that we assembled for you a few months ago, a list of cars that offer the most pound-feet with the fewest pounds to carry, is an interesting one to break down. Sure, there's a big difference in how the torque is applied from a turbocharged six-cylinder in a Swedish luxury sedan and a massive heavy-duty truck's turbo-diesel. But being the car/stat geeks that we are, we think it's kinda neat that those two vehicles rank near each other where torque and weight intersect.
As with the horsepower list, we've given you figures as pounds per every one pound-foot. Again broken down into broad price categories, we've got a mixed bag of 2014 and 2015 models here, too. Every effort has been made to select the most up-to-date prices and specs, and we've also to omitted some '14 cars that won't be re-upped after the ongoing yearly changeover.

Dodge Durango SRT is much cheaper than Jeep Grand Cherokee SRT

Dodge has finally announced availability and pricing for the 475-horsepower Dodge Durango SRT. The Detroit-built SUV will start at $64,090 and hit dealer lots toward the end of the year. It's not a cheap SUV by any means, but you get a lot for the money: including 470 pound-feet of torque, and all-wheel-drive. Plus it has three rows of seats and can tow 8,600 pounds. Not only that, but it's basically the best performance SUV deal from the Fiat-Chrysler group. The Grand Cherokee SRT, with the same engine, costs almost $4,000 more at $67,990. The Durango SRT outperforms the Grand Cherokee in several key areas, too. It's 0.4 seconds quicker to 60 mph and manages to break into the 12s in the quarter-mile whereas the Grand Cherokee is stuck in the mid-13-second range. The Durango can also tow an extra 1,400 pounds, has an extra row of seats, and has more maximum cargo space with the seats. So unless you just really love the Jeep look and brand, the Durango SRT seems like the logical choice. And if either still isn't potent enough, just wait for the upcoming Grand Cherokee Trackhawk. Regardless of your choice of SRT vehicle, you'll still come away with a really powerful SUV, as well as a day of instruction at the Bob Bondurant driving school in Arizona. Related Video: Featured Gallery 2018 Dodge Durango SRT View 32 Photos Image Credit: Dodge Dodge Crossover SUV Performance