Dodge SLT, page #14

Auto blog

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

1968 Dodge Super Charger is a super Charger with a supercharger

Mopar's latest custom creation is sure to be in the running for coolest car at this year's SEMA show. It's a 1968 Dodge Charger, a car selected in part because this year marks the car's 50th anniversary, but taken to the extreme and renamed Super Charger. The headliner of the car's radical upgrades is the new "Hellephant" engine. It's a take on the original car's 426-cubic-inch Hemi V8. But this new engine, with the same displacement, is based on the current Hemi V8, and adds a supercharger. All told, it makes a whopping 1,000 horsepower and 950 pound-feet of torque on 93 octane pump gas. It will be available as a crate engine, too. The engine is far from the only impressive change to the car. All over the body are mild to wild tweaks. The wide, uninterrupted grille from the original is still here, but it's a one-piece example now. And instead of hiding the headlights behind doors that have to open for illumination, the lights simply shine through the grille, retaining a clean look even at night. The whole car sits 2.5 inches lower than stock, and it's now four inches wider thanks to the huge fender flares. They house 305-mm-wide tires up front, and 315-mm tires in the rear. Likely the most complicated change to the car is the lengthened wheelbase. There are two more inches between the wheels now, something Mopar did to reduce the front overhang. A close second in complexity are the taillights. They're the same shape as the originals, but now the round elements are actually exhaust outlets. The tips also happen to be the same as those on the Alfa Romeo Stelvio. There are other details that help bring together the exterior. The rain rails have been smoothed out on the roof, the vent windows removed, special 426 stickers have been added, and the fuel door now has a Hellephant badge with a blue background with lots of little Mopar Ms. The interior gets some attention, too. The rear seat has been removed, Dodge Demon style. It gets a custom roll bar designed to be as unobtrusive as possible, even getting the hoop around the seats to roughly line up with where the windows meet. Gauges come from the Mopar catalog, and the steering wheel and seats are from the dearly departed Dodge Viper. They're particularly relevant, as the six-speed manual transmission comes from the Viper, too. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

SpeedKore carbon-fiber 1970 Dodge Charger packs a 996-hp Demon engine

SpeedKore Performance does some pretty neat things with carbon fiber. SEMA is always the place to show off new and interesting builds, and SpeedKore has a few new offerings on display. We talked about the lightweight carbon fiber 2018 Dodge Demon late last week, but now that SEMA 2018 is in full swing, we've got a look at something even cooler, an all-carbon, Demon-powered 1970 Dodge Charger "Evolution." SpeedKore Performance is based in Wisconsin and has been churning out SEMA showstoppers for years. In addition to the Demon, take a look at this Shelby GT350R the shop modified a few years back. The Charger Evolution is named so because it further modifies the SpeedKore Charger "Tantrum" that was used in the " Fast and Furious" films. That car used a carbon composite body and was fitted with a 9.0-liter Mercury Racing twin-turbo engine making an absurd 1,650 horsepower. The Evolution might be down on power — only 996 horses thanks to a modified Demon crate engine — but the goal was to create something a little more usable than the Tantrum. Upgrades include a smaller supercharger pulley, larger fuel injectors, a custom cold-air intake, stainless steel headers and a custom exhaust with SLP mufflers. There's also a Dailey Engineering dry sump, upgraded oil cooler, and Saldana radiator. It's also lighter, thanks to even more carbon fiber. SpeedKore had a goal to get the '70 Charger to about 3,200 pounds. To get there, the Evolution employs carbon-fiber bodywork, an aluminum floor, a steel roll cage and a new 2x3-inch steel box frame. SpeedKore's autoclave is large enough to bake a one-piece roof, hood and quarter panels. The bare bodywork has been finished with a clear coat to help prevent fading. The Evolution uses billet aluminum for the door handles, fuel cap and grille, all finished in a bronze-nickel coating to pair with the HRE wheels. In addition to the floor, aluminum was used for the firewall, transmission tunnel and radiator shroud. To slow the Charger down, it uses Brembo brakes with six-piston calipers up front and four-piston calipers in the rear. The suspension uses Penske adjustable coilovers while Michelin Pilot Sport 2 tires wrap 19x10-inch front wheels and 20x12-inch rear wheels. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Mopar teases a big Hemi crate engine for SEMA

Mopar has released a new video teaser hinting at the release of a large and powerful crate Hemi engine at SEMA later this month in Las Vegas. The video functions like a lesson on symbolism in an English lit class. It opens with smoke and settles on a pair of backlit, large-clawed paw prints that look to be feline in origin. Then we hear earth-shaking pounding sounds of something larger than the paw prints that stomps over them. Then cue an overhead shot of what looks to be a vintage-model Dodge Charger and its growly Hemi engine entering the frame and then gunning the engine. Mopar already offers three crate Hemi V8 engines, topped by the 6.2-liter supercharged Hellcat, good for 707 horsepower and 650 pound-feet of torque, found in the Dodge Charger SRT Hellcat and marketed for pre-1976 classic muscle cars. So promising that "Something big is coming" is really saying something. Could it be a crate version of the 808-hp Hemi 6.2 that was found in the Dodge Demon, which was rated at 840 hp on racing fuel? Or is it something different? Curiously, Mopar says its reveal is planned for Tuesday, Oct. 30 at the odd time of 4:26 p.m. Could that time be a reference to the 426 Hemi — and specifically the Generation III 426 Hemi "Elephant" that Chrysler made several years ago? That technically qualifies as "bigger," and it would also align with both the muscle car-era Charger and round, earth-shaking footprints shown in the video. Time will prove whether we were right. Related Video: Image Credit: Mopar SEMA Show Chrysler Dodge Performance Classics dodge demon dodge charger srt hellcat

2020 Ford Police Interceptor Utility dominates Michigan State Police testing

The Michigan State Police has released its preliminary findings from testing the 2019 crop of police vehicles, and the results are a bit surprising. The consistent top performer of the bunch was the 2020 Ford Police Interceptor Utility, better known to civilians as the Ford Explorer. Specifically, the top performer was the model with the new turbocharged 3.0-liter V6. The Michigan State Police conducts acceleration, top speed, braking and lap time tests of all the available police vehicles. The 3.0-liter Police Interceptor Utility was the fastest to 60 mph at 5.77 seconds, had the highest top speed of 150 mph, and the best average lap time of 1:36.47. The lap time was particularly impressive as it was just over half a second faster than the next quickest car, the all-wheel-drive V8 Charger. View 13 Photos Still, the 2019 Dodge Charger gave the Explorer a serious run for its money. The all-wheel-drive V8 Charger was only 0.1 seconds behind the Explorer to 60 mph with a time of 5.87 seconds, and the rear-drive version was third quickest at 6.15 seconds. Both V8 Chargers were only 1 mph off of the Explorer's top speed, and the V6 example was third fastest at 141 mph. We already mentioned the all-wheel-drive V8 Charger was half a second off the Explorer's lap time, and the rear-drive variant was just over 1 second behind, giving it the third fastest average time. Dodge also took home braking bragging rights. The V6 Charger won out with a distance of 126.9 feet, followed by the rear-drive V8 Charger with 128 feet, and the V6 Durango Pursuit stopping at 128.8 feet. Now of course where there are winners, there are also losers. The slowest accelerating police car was the Ford Police Responder Hybrid Sedan, better known as the Fusion Hybrid, with a time of 9.24 seconds. At 8.59 seconds was the V6 Dodge Durango, and the V8 Chevy Tahoe with four-wheel-drive was third slowest at 7.98 seconds. Lowest top speed was 106 mph with the Ford F-150 Police Responder with the 3.5-liter turbocharged V6, followed by the V6 and V8 Durangos with 117- and 118-mph top speeds respectively. In braking, the Chevy Tahoes performed the worst with the rear-drive version stopping at 145.7 feet and the four-wheel-drive version stopping at 142.5 feet. The F-150 followed with 141.9 feet. When it came to lap times, the Fusion Hybrid lapped the slowest with a time of 1:46.31. The V6 Durango was about a second faster with a time of 1:45.45.

Spy shooter confessional | Autoblog Podcast #554

On this week's Autoblog Podcast, Editor-in-Chief Greg Migliore and Green Editor John Snyder talk to SpiedBilde spy photographer Brian Williams about just how he manages to get the shots of those camouflaged prototypes. Then, our editors discuss driving the Dodge Challenger Hellcat Redeye Widebody. They also chat about a couple of news items, including the official reveal of the Audi E-Tron Quattro, as well as the latest happenings at Ferrari — like the beautiful Monza SP1 and SP2.Autoblog Podcast #554 Get The Podcast iTunes – Subscribe to the Autoblog Podcast in iTunes RSS – Add the Autoblog Podcast feed to your RSS aggregator MP3 – Download the MP3 directly Rundown Chatting with spy photographer Brian Williams of SpiedBilde Driving the 2019 Dodge Challenger SRT Hellcat Redeye Widebody Audi E-Tron Quattro Ferrari Monza SP1 and SP2, and other Ferrari news Feedback Email – Podcast@Autoblog.com Review the show on iTunes Related Video:

2019 Dodge Challenger SRT Hellcat Redeye Drivers' Notes | Wide awake

Editor-in-Chief Greg Migliore — I've always wondered how Dodge would evolve the Challenger. There was only one real generation, not counting the rebadged Mitsubishi. Past and present, it's always looked the same. With the Hellcat, Demon, and now my personal favorite, the Hellcat Redeye Widebody, it makes total sense. There's no need to redesign it every few years. Just tweak it and add cool features — like flared fenders and the 797-hp Hellcat engine. It's all you need. This thing makes a statement. The Redeye is the car your neighbors want a ride in. I parked in our office building's basement, and co-workers heard me gunning the engine — two stories up. It's a growl. It has bass. It's angry. It gets a little metallic sometimes, depending on how and when you lay on the gas. I launched fairly hard at every traffic light. Sometimes I'd rev at idle. The Monroney that came with our test car lists the fuel economy as zero (it actually gets 13 city and a respectable 22 highway). But still. You get the point. I've always liked how the Challenger drives. It's big. It's heavy. The hood looks like the deck of an aircraft carrier. It's not trying to be a track rat. Go fast in a straight line. That's what you do. Take a hard left and maybe you skid a little bit. Maybe that's the idea. You don't eat cheeseburgers because they're good for you. You eat them because they taste good. Hey, cheeseburgers have protein. And vitamins. Healthy isn't the right description, but there are some benefits. The same reasoning applies to this Challenger. The interior is attractive, well-furnished and comfortable. The leather-trimmed seats are supportive. I love the saddle brown color. I used to say the coupe's low roof and bulky A-pillars were a problem. Then I got over that. You're driving nearly 800 hp, so sit up and be on your toes. The trunk is huge, too. I could have put a car seat in the back, had I needed to. You can live with the Challenger. And the Redeye is perhaps the best version yet. The starting price is about $60 grand. That's a steal. The price of our tester is $92,290. That's insane. The $6,000 widebody pack is the thing I'd recommend most out of all the options. Get the nice leather, too. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Armormax loads a bulletproof Dodge Hellcat AWD Police Special

Earlier, we wrote about the Armormax armored Tesla Model S P100D, which International Armoring Corporation called the fastest armored car in the world. As the company also outfits cars such as Dodge Chargers, it's only logical that the showcase car is a SRT Hellcat — but the interesting thing is that the company can also upgrade the Hellcat to all-wheel drive, as Armormax told Motor Authority. When ordering an armored Charger SRT Hellcat, the AWD implementation is just a matter of ticking the corresponding box. The Armormax Charger SRT Hellcat seen here is also outfitted with police patrol car gear, complete with a push bar, run-flat tires, ballistic bulletproof glass and a mean matte black wrap. Even if the 6.2-liter, supercharged Hellcat powertrain probably has no problem hauling an armored bodyshell around, it's likely that the company has used the same synthetic fiber laminate on the Charger as on the Tesla. The bulletproof Tesla's weight gain was a negligible 11 percent, and while the Charger is a lighter car to begin with, avoiding using regular-issue ballistic steel seems to be the way to go if you want to keep the curb weight in check. The Hellcat's battery, radiator, fuel tank and ECU also get their share of protective covering, so that the vehicle is harder to disable. Paneling is available in ballistic protection levels ranging from B4 (can withstand a .30-caliber lead-core softpoint bullet) to B7 (can withstand a 9mm full-copper jacket). And while pricing isn't announced, it is likely to depend on how much protection is applied on the Hellcat and whether all four wheels are powered. A stock one is priced at $65,345. Related Video:

FCA recalls 210,000 new Jeeps and Dodges due to a brake issue

FCA is recalling some 210,000 vehicles in the U.S. and elsewhere over a possible braking issue. On this occasion, the recall is made less complicated by the fact that about one-third of the affected vehicles are so new, they still reside on dealer lots, making them easy to tally up and put right. The recall concerns 2018 Dodge Journeys, 2019 Jeep Cherokees and 2018-2019 Dodge Grand Caravans and 2018-2019 Jeep Compasses. Most were built in spring 2018, and the recall is related to a brake system component that failed to meet FCA specifications. Further information available on the NHTSA website details the issue, saying that insufficiently coated rear brake caliper pistons may cause gas pockets to form in the brake fluid of very new vehicles. This in turn can reduce rear brake performance — bubbles in brake lines are not desirable. FCA underlines that the brakes still function, but stopping distance can be affected. As a remedy, the brake systems are inspected and re-bled. The recall is slated to begin on Sept. 28. In addition to 154,337 vehicles in the United States, the recall concerns 19,066 units in Canada, some 900 in Mexico and some 35,500 vehicles on other markets. Related Video: Image Credit: AOL Recalls Dodge Jeep Minivan/Van SUV FCA

Junkyard Gem: 1981 Dodge Challenger

The first Dodge Challenger was an E-Body sibling to the 1970-1974 Plymouth Barracuda, and it was a pure Chrysler product with either Slant-6 or V8 power. Then stuff happened and the Challenger name went away for a while, returning in 1978 on a rebadged Mitsubishi Galant Lambda. For 1981, the Challenger got an updated body, and that's what we've got here in a Denver-area self-service wrecking yard. Chrysler was selling lots of Mitsubishis by the early 1980s, including the Colt econobox, the Dodge Ram 50 pickup, and the Plymouth Arrow truck. The Challenger's Plymouth-badged sibling was the Sapporo. This one had a bunch of late-1990s receipts from Los Angeles-area shops, and a check of the VIN on the California smog-check database shows that it last passed the Golden State's emissions test in 1997. Did it drive to Colorado 20 years ago and then sit until a few months ago? There is no easy way to know. Early Mitsubishi-built Challengers could be had with a 1.6-liter four-cylinder engine, but in 1981 the only engine choice was the Astron 2.6 four-banger, rated at 105 horsepower. Members of the Astron 2.6 family powered everything from Dodge Aries-Ks to Mitsubishi Starions in North America, and production continued nearly into our current century for Chinese-market trucks. Not many miles on this car, and no rust. The Index of Effluency-winning team at the recent Colorado 24 Hours of Lemons race grabbed a few bits from this car for their somewhat related 1976 Plymouth Arrow, but otherwise it appears that this rare classic may go to the crusher more or less intact. It's a lightweight, rear-wheel-drive coupe with decent power (for its era) and a 5-speed manual transmission, but there's just not much of a following in Colorado for these cars. I see the occasional Sapporo or Challenger during my junkyard travels, but the numbers have declined in recent years. Soon they will all be gone. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Related Video: Featured Gallery Junked 1981 Dodge Challenger View 26 Photos Auto News Dodge Automotive History Coupe Performance