2012 Dodge Ram 3500 Laramie Longhorn Mega Diesel Dually Texas Direct Auto on 2040-cars

Auto blog

Dodge Journey recalled for freezing fluid lines

The Basics: FCA is recalling 10,944 examples of the 2009-16 Dodge Journey - specifically those equipped with the optional engine block heaters and located in extremely cold climates. The Problem: Power steering fluid lines may leak when starting the engine in extremely cold weather, which would increase the amount of effort required to steer the vehicle. Injuries/Deaths: FCA reports that it is "unaware of any related injuries or accidents." The fix: The manufacturer is working on expediting replacement parts to resolve the issue in those vehicles potentially affected. If you own one: Expect to hear from the manufacturer soon to arrange service. Your chances of being affected are higher if you live in Canada, where a far greater number – estimated at 187,436 – of Journeys may be affected. Related Video: STATEMENT: FLUID LINE May 6, 2016 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 10,944 U.S.-market midsize crossover vehicles equipped with optional block heaters to address fluid-line durability in extreme, cold-weather conditions. An investigation found some lines carrying power-steering fluid may leak at engine start-up, when the vehicle is subject to extreme cold. Steering is not lost in such circumstances. However, if a vehicle is so-affected, the amount of physical effort required to steer may increase. The Company is unaware of any related injuries or accidents. Affected are certain model-year 2009-2016 Dodge Journey vehicles. An estimated 187,436 vehicles in Canada are also subject to this recall. Replacement parts are expected to become available soon. Affected customers will be notified accordingly. FCA US urges customers to follow the instructions on all recall notices. Customers with questions may call the FCA US Customer Care Center at 1-800-853-1403. Featured Gallery 2014 Dodge Journey Crossroad View 19 Photos News Source: FCA Recalls Dodge Crossover Minivan/Van dodge journey

Hellcat motor 'fits like a glove' in the Wrangler and Gladiator, says Jeep

Just like "technically correct" is the best kind of correct, "technically possible" is the best kind of possible. Specifically, it's technically possible to slot a Hellcat crate motor into the Jeep Wrangler and Gladiator, as confirmed by Jeep brand chief Tim Kuniskis. Speaking to Australian media last week, Kuniskis went on to say that "everybody" keeps asking him if the supercharged, 6.2-liter Hellcat V8 fits in the Wrangler and Gladiator, and that the answer is yes. "It fits like a glove," said Kuniskis. But — there is a but — the fitment is so close for comfort, it makes the combination one that Jeep can never produce. "There's no air space around the engine [...] so you have no crush space, you have nothing that can be used to absorb energy in a crash. It's not a problem to put it in — other than emissions and fuel economy — except it would never pass any crash tests, and that's a problem," as Kuniskis told Drive. However, since the Hellcat is now out of the bag, it's probably only a matter of time until hobbyists with access to these engines will start putting them into Wranglers and Gladiators. And with the time-honored piece of advice — just don't crash into anything — it'd be a combination worth seeing and hearing. Just to throw it out there, a "Hellcrate" engine costs less than $20,000 new. Kuniskis also said that Jeep is "gauging interest" for the J6 concept, one of the Easter Jeep Safari concepts that were just revealed. "[The J6] is just a concept at this stage. But that doesn't mean we're not going to gauge interest for it." However, he said justifying its production is apparently "tough."

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016