2006 Dodge Ram 3500 Diesel 4x4 Dually Lifted Leather Slt Quad Cab 1 Texas Owner on 2040-cars

Auto blog

2013-14 Dodge Viper recalled over faulty door handles

The 2013-14 Dodge Viper is getting a voluntary recall affecting 1,762 cars worldwide to replace their door-handle assemblies. Of the affected vehicles, FCA US reports there are 1,451 in the US, 160 in Canada, 17 in Mexico and 59 of them outside of NAFTA. After receiving three reports of doors either not closing or opening while driving a low speeds, FCA US engineers found a new sealant from a supplier didn't provide sufficient moisture protection to the electronic switches for the door latches. If the parts get wet, this can potentially cause a short circuit. The automaker is quite clear that are no reports of accidents of injuries from this problem. As always, the recall repairs will be done at no cost to owners, and FCA US will be getting in touch with customers soon about the problem. Related Video: Statement: Door-handle Assemblies April 9, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 1,762 cars globally to replace their door-handle assemblies. FCA US launched an investigation after the Company received three warranty claims linked to doors that failed to close or opened inadvertently while vehicles were moving at low speed. The Company is unaware of any related injuries or accidents. Engineers determined a sealant, newly adopted by a supplier, provided inconsistent moisture protection to the electronic switches that control the door latches. Switches exposed to moisture may short-circuit. Affected are approximately 1,451 model-year 2013-14 Dodge Viper SRT cars in the U.S.; 160 in Canada; 17 in Mexico and 59 outside the NAFTA region. Affected customers will be notified and advised when they may schedule service, which will be performed at no cost. Customers with questions may call the FCA US Customer Information Center at 1-800-853-1403.

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

The Dodge Neon is coming back... to Mexico

It's been a long time since we've seen a new Dodge Neon putt-putting around. But soon it will be back, and in North America, too, if you want to get technical about it. But this time, the Neon will be limited exclusively to Mexico. According to Ward's Auto, FCA is planning to import the Fiat Tipo to Mexico, but rebadged under the Dodge brand and with the Neon nameplate on the trunk... even if it doesn't have those signature round headlights, or a three-speed automatic transmission. Never heard of the Fiat Tipo? It debuted almost a year ago as the Aegea Project, and went into production shortly thereafter – similarly called the Egea in Turkey where it's made, but the Tipo in other European markets. It's a budget-oriented, C-segment compact with a range of four-cylinder engines, and though designed from the get-go as a four-door sedan, it rolled into Geneva last month in hatchback and wagon forms as well. The Tipo is built at the Tofas plant in Bursa, Turkey, alongside the Fiat Doblo – which is also shipped over to North America, rebadged as the Ram ProMaster City. In the Mexican market, FCA also sells the Fiat Siena sedan as the Dodge Vision, the Mitsubishi Mirage rebadged as the Dodge Attitude, and the Fiat Strada as the Ram 700 – all nameplates exclusive to our neighbors to the south. Whatever its origin, it'll be interesting to see a Neon again the next time we venture South of the Border – particularly considering that the Neon was arguably the last time that Chrysler had a competitive compact on its hands. The Caliber that followed never gained the same kind of traction, so to speak, and FCA recently ceased production (for the time being at least) of the Dodge Dart and Chrysler 200 to focus on larger trucks crossovers – the likes of which the Caliber tried to emulate (in style, if not in substance).