Low Miles Dodge Mega Cab Cummins 4x4 Diesel on 2040-cars

Auto blog

The Dodge Demon was developed under a cloud of smoke

The Dodge Demon needs no introduction. The car is so full of superlatives that most of it sounds unbelievable until you see and hear it in action. The car was revealed after months of teasers and cryptic messages, but the public weren't the only ones in the dark. From the start, the Demon's development was a closely guarded secret. There were even some within SRT that didn't know about the project. The people behind the car went through a lot of effort to keep it that way. At an event covering the finer details of the Demon's supercharged 6.2-liter V8, Dodge CEO Tim Kuniskis and SRT Powertrain Director Chris Cowland spoke about the smoke and mirrors used to hide the Demon's development. Work on the car progressed for nearly two years before it was made public, with just a small team having full access to the project. Numbers were altered. Secret meetings were held. SRT engineers worked nights and weekends while parts suppliers were given as little information as possible to move progress forward. Preliminary work on the Demon began in April of 2015, not long after the standard Hellcat hit the streets. The goal wasn't to create a faster Hellcat. Kuniskis said that would have been easy. They wanted a single-minded vehicle that could also be driven on the road. It's the same mindset that brought about the Dodge Viper ACR. Dodge wanted a car that could sell the brand to both enthusiasts and non-enthusiasts alike. 840 horsepower is going to raise anyone's eyebrows, including the Camry owner parked down the street. While preliminary work started in April, the final greenlight wasn't given until September. The project was originally going to revive the American Drag Racer, or ADR, name. When we saw the first hints of the Demon last fall, we labeled the spy photo above the Dodge Challenger ADR. It was set to have 10-percent more power and 20-percent more launch force than the already gut-punching Hellcat. It was also only going to have a quarter-mile time in the 10s, just slightly quicker than the Hellcat. Somewhere along the line, the team realized that the ADR wasn't enough. It was just going to be a Hellcat plus, and that wasn't exciting. The main goal was changed: 9s with light. Translated, that means a 9-second quarter mile with light under the tires (read: a wheelie). From that point forward, everything about the Demon's development, from power to suspension to weight, would be done in pursuit of that goal.

2019 Dodge Charger R/T Scat Pack vs. 2018 Kia Stinger GT Comparison | Big bargain bruisers

The Kia Stinger GT is a sporty midsize sedan with a sleek hatchback roof and a luxurious interior, so it makes sense that it's frequently been compared to high-end German cars of a similar description. While it has generally faired quite well against the likes of the Audi A5 Sportback and BMW 4 Series Gran Coupe despite its commoner badge, it's unclear how many potential Audi and BMW buyers are going to also consider a Kia. So, what else can be thrown at it? Well, the Stinger has a bold, brash exterior the Germans can’t match, while boasting loads of space, features and performance at a discount price. You know what that sounds like? The Dodge Charger, which we recently had in the Autoblog garage. It's not exactly an apples-to-apples choice – bigger, no hatch, a pair of extra cylinders – but the two sedans are close on price, especially the 2019 Dodge Charger R/T Scat Pack that arrived at our office with an MSRP of $46,075. ThatÂ’s just a few hundred less than our long-term StingerÂ’s price of $46,620. So I decided to try them back-to-back to see which is the better bargain bruiser. 2018 Kia Stinger View 11 Photos The Charger takes an early lead with its 6.4-liter naturally aspirated V8, which generates 485 horsepower and 470 pound-feet of torque – a big advantage over the StingerÂ’s 365 horses and 376 pound-feet. But itÂ’s not just the power that gives it the edge, itÂ’s that it makes all the right sounds, and itÂ’s so smooth and responsive. Any amount of throttle yields a charmingly round, mellow sound, with just a hint of grit. ItÂ’s vintage American rumble in a modern(ish) wrapper. Additionally, power is so smooth and progressive that itÂ’s easy to dial in the right amount. ThereÂ’s one minor exception in its controllability at launch, as it takes a moment for the torque converter to spin up, and a lazy foot can get the tires to yelp (yours truly and a couple other editors ran into this). The ZF eight-speed automatic shifts seamlessly, whether youÂ’re in automatic or manual mode. The Kia Stinger GTÂ’s twin-turbo 3.3-liter V6 is also a great engine, but it lacks the character and the finesse of the Charger's V8. While that giant 6.4-liter lets out a hearty roar, the Stinger keeps its mouth tightly shut. Only a low, generic mumble from the intake comes from under the hood. And as weÂ’ve talked about before, the throttle response is sluggish, and it takes a moment for boost to build.

How to tune a car right: Part 3, tuning Mopar with OST Dyno

Not long ago, I wrote a story about a pony car tuned with a supercharger. The blower install had been done properly. Then the car's owner bolted on a set of great looking wheels wrapped in good looking but inexpensive rubber. On my first test drive, I couldn't get any of that supercharged sweetness to the ground. It was the perfect ride for parking in a Burger King parking lot on a Friday night. I tooled around on a Sunday drive, shaking my head that someone had spent five figures to get more power the right way, with a clean install, then wiped out the gains so thoroughly that the stock engine would likely have overwhelmed the tires. This got me thinking about the ways people ruin their quest for horsepower, either on the front end by not insisting on a clean install and paying the money for it, or on the back end with supplemental purchases like cheap tires or cheap gas. So I called three tuners, one focused on GM, one on Mopar, one on Ford, to find out what people should know about how to get the best power for their goals, and how to make sure they are able to use all that power. The first interview in this three-part series was with Blake Leonard at Top Speed Cincy in Cincinnati, Ohio, the second with Brandon Alsept at BA Motorsports in Milford, Ohio. This third and last interview is with Micah Doban at OST Dyno in Slippery Rock, Pennsylvania, a family business with more than 40 years of Mopar expertise specializing in Gen III Hemis, but tuning everything from land-speed cars and drag racers to Jeeps The interview has been edited for clarity and concision. Do people who come to OST generally know what they want? Probably 80% of the people who come in simply want more power with no particular ET goal [ET is a kind of bracket handicapped drag racing – ed.]. WhatÂ’s the best way to start a Mopar tune? The first thing is what people often skip, and that's to find a tuner or a shop. People will throw parts on their cars that the Internet said to, then go to a tuner who does things a different way, and [the tuner is] like ‘No we don't like to use these injectors, we don't like these parts.Â’ You have to find someone familiar with the parts that are on your car or that you're planning to put on your car. So having a goal and then finding a tuner who can help you with that goal is proper way to start. Exactly. And a lot of tuners have their own formula – and when I say tuner I mean someone that also does work to the cars.