Great Price, Low Miles, Clean Carfax, Well Maintained And Ready To Go! on 2040-cars

Auto blog

Lee Iacocca's very first Dodge Viper RT/10 nets $285,500 at auction

The first 1992 Dodge Viper RT/10 to roll down the assembly line, which was snapped up by Chrysler chief Lee Iacocca, yesterday hammered at the Bonhams auction in Arizona for $285,500, more than double the pre-sale estimate. According to a history of the car published by the auction house, Iacocca, in his introduction of the Viper to the press, pointed to the car on stage and said, "This one right here is mine." That historic Viper, with serial number 001, has never been available on the open market, as Iacocca kept the car from new until he passed away last year. The car has been driven just 6,200 miles and was being sold by his estate. Other Lee Iacocca cars offered at the same sale fared less well. A 1986 Chrysler LeBaron Town & Country convertible — the ultimate expression of Iacocca's company-saving K-cars — with 20,500 miles on it sold for $19,040. That's less than the $20,000 to $25,000 the auction house had estimated the car would bring. A third car from the former auto executive's estate was a customized 2009 Ford Mustang. The pony car was one of a limited run of 45 Iacocca-branded custom Mustangs, which were reworked by Metalcrafters and sold by Galpin Ford in Los Angeles. The Iacocca Mustang, never titled and with 220 miles on it, hammered for $49,280. Related Video:     Featured Gallery Lee Iacocca's 1992 Dodge Viper RT/10 View 13 Photos Celebrities Chrysler Dodge Auctions Automotive History

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

The 2017 Dodge Charger Pursuit will always watch your back

Police cruisers spend the majority of their life parked and idle, waiting for the call to action. A parked car is a vulnerable one, especially when there may be incentive to disable or destroy that vehicle. FCA has worked with InterMotive, Inc., to supply safety technology that will detect movement behind the vehicle through the combined use of radar and the rear-view camera. Even better, FCA is putting this tech in every 2017 Dodge Charger Pursuit at no extra cost. According to InterMotive, the Officer Protection Package is designed to help awareness with an officer is parked and working inside the vehicle. The system will provide an alert if there is anyone moving behind the vehicle to ambush the officer. The system plugs into the OBDII port and is secured under the dash. The device can then be manually switched on. This triggers the rear parking sensors to activate and. If any movement is detected, the officer can look behind the car through the rear-view camera. The system will automatically lock the doors, roll up the windows and flash the taillights. No word on how much the system will cost for non-2017 vehicles, but it is available for order right now. Related Video: News Source: FCA Dodge Technology Police/Emergency