Dodge Ram Slt Long Wheel Base. 5.7 Hemi 4x4 on 2040-cars

Auto blog

Dodge Viper recall requires small-handed mechanics

It has been over a year since Chrysler first announced its recall of 3,660 2003-2004 Dodge Vipers because the airbag could suddenly deploy. The repairs are finally beginning, and it appears to be a nightmare for mechanics.
According to the automaker's filing with the National Highway Traffic Safety Administration, the airbag control module can fail, which causes the bag or the seatbelt pre-tensioner to deploy without warning. It took over a year to design the new parts, according to The New York Times. However, Chrysler finally has a new "jumper harness with an in-line diode filter circuit" ready to fix the problem.
The dilemma now moves to the mechanics who have to actually install the part. A 47-step guide from Chrysler explains that the procedure should take about two hours. It's not an easy job, though. Most of the dashboard has to be taken apart, and the instructions include this helpful bit of advice: "Installing the jumper harness and filter box into position is not an easy task. Patience, perseverance, and small hands are required." We wish the best of luck to them. The fix comes just in time for the Vipers to enjoy the summer sun.

NHTSA investigating 110,000 Ram 2500s and 3500s, one death alleged

The National Highway Traffic Safety Administration has launched an investigation focusing on 110,000 Dodge Ram 2500 and 3500 pickups from model years 2004 to 2006. One death has already been reported, according to NHTSA, due to a potential fault with the clutch interlocks on manual-transmission versions of the heavy duty pickup.
According to the report, these trucks can be started without depressing the clutch. There have been three reports so far, and as we mentioned above, one very sad incident seems to have resulted in the death of a child.
"One complaint involved an incident that occurred when a child was able to enter the vehicle and start the ignition without depressing the clutch. The vehicle then moved forward striking another child resulting in a fatality," NHTSA said in the investigation bulletin, which you can view below.

Here's the last Dodge Viper

The last Dodge Viper has rolled off the line. Ralph Gilles, FCA's Head of Design since April 2015, posted a photo gallery on Instagram with the caption "So long... #Viper." The gallery includes multiple photos of the Conner Avenue Assembly Plant in Detroit, where the Dodge Viper has been built since 1995. In the gallery, we see a yellow unit with black stripes coming down the line, and Gilles is posing in front of it with Dodge/SRT Head of Design Mark Trostle. The yellow Viper is followed by a red car, with nothing else behind it on the line. That red Viper is "the ultimate last one," according to Gilles, adding that the automaker will be holding onto that unit for the company's heritage collection. You can click through the gallery here: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. When asked in the comments if the Viper was discontinued because of low sales, Gilles replied, "Not really as it sold well over the last couple of years at a great mix of mostly ACRs in the last 15 months. It has more to do with a new ejection mitigation regulation airbag that simply won't fit in our package." Despite the solemnity of the post, Gilles is upbeat about the Viper in general, saying "The Gen5 had a great 5 model year run and the Viper platform which has not changed that much over the years had a great 25 year run!" He says he has great memories with the car, and that "they are relatively robust so they will be around making memories for generations to come!" Still, we hope to see something that lives up to the Viper's wild, raw spirit come from FCA in the near future. Related Video: Related Gallery Roadkill Nights Dodge Vipers 2017 View 40 Photos News Source: Instagram: @ralphgilles Plants/Manufacturing Dodge Automotive History Coupe Performance Supercars FCA viper