2008 - Dodge Ram 1500 on 2040-cars
Surprise, Arizona, United States
There is normal wear in the bed as there is NO liner. There are a few holes drilled in the bed rail where eye hooks used to be. The truck has some very light Arizona pin striping and one small dent on the drivers side, but it does not have a crease in that dent. A little work on that dent and a good buff and this truck will look extremely sharp. There is a small rip on the drivers seat. There is a decent Pioneer stereo with an Alpine amp. There is also a trailer brake installed. Other than that, to the best of my knowledge the truck is stock. AM radio has "makes noise." I have the part to fix it. Also, the TPMS light needs to be reset, but all tires are fine and at right pressure. Battery, AC and tires are fine. The inside is reasonably clean. The engine is a monster and runs like a champ. The truck has been well maintained and is ready to roll. Recently had an inspection at Carmax and I'm willing to e-mail that document. Truck is currently financed with Bank of America.
Dodge Ram 1500 for Sale
2005 - dodge ram 1500(US $7,000.00)
2011 - ram 1500(US $7,000.00)
2005 - dodge ram 1500(US $7,000.00)
2004 - dodge ram 1500(US $7,000.00)
2005 dodge ram 1500 pickup(US $7,000.00)
2005 - dodge ram 1500(US $8,000.00)
Auto Services in Arizona
Xtreme Roadside ★★★★★
Xpress Automotive & Wash ★★★★★
Windshield Replacement & Auto Glass Repair Phoenix ★★★★★
West Glenn Body Shop ★★★★★
Valley Express Auto Repair ★★★★★
Valley Express Auto Repair ★★★★★
Auto blog
Stellantis reveals STLA Large platform with EV and ICE support
Fri, Jan 19 2024Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.
Subaru Legacy pitted against Roadkill project cars
Fri, 05 Sep 2014There's an evergreen debate among auto enthusiasts about whether they would prefer to have the latest and greatest car of today or a certified classic from yesteryear. What if you had to further define that, though, and the choice was between a brand new 2015 Subaru Legacy or a turbocharged Datsun 240Z with a hatch that wouldn't close? Roadkill aimed to find out that and more in one of its best videos to date.
According to the hosts, Subaru came to them, handed over some money and challenged Roadkill's project cars against its latest Legacy. The result is every bit as good (or better) than any automotive-themed show you could find on television.
Things start simple with a figure-eight race in a rodeo arena with the Subaru taking on Roadkill's 1968 Ford Ranchero, originally built for ice racing. From there the Legacy races a 1968 Dodge Charger with no windows around and off-road rally stage. Finally, the Subie goes head-to-head against the Rotsun, the aforementioned turbocharged 240Z, through an abandoned neighborhood. Plus, there's a bonus drag race challenging them all.
Stellantis announces ‘Circular Economy’ business to drive revenue, decarbonization
Tue, Oct 11 2022Stellantis has already announced its plans to reach net-zero carbon emissions by 2038. Today, the automaker has announced a new business unit to help it reach that goal while generating 2 billion euros per year in revenue by 2030. The “Circular Economy” business will help make revenue less dependent on finite, rare and ecologically problematic materials. The Circular Economy model features what Stellantis calls a “4R” strategy, comprising remanufacturing, repair, reuse and recycling. The goal is to make materials last as long as they can, reducing reliance on the acquisition of those precious new materials in the future by returning them to the business loop when theyÂ’ve reached the end of their first life. Through these processes, Stellantis says it can save up to 80% raw material and 50% energy compared to manufacturing a new part. Remanufacturing, or “reman” in Stellantis shorthand, means dismantling, cleaning and rebuilding parts to OEM spec. Nearly 12,000 remanufactured parts are available for customers to purchase. Some remanufacturing is done in-house, and some with partners and through joint ventures. Repair is pretty obvious — fixing parts to put back into vehicles. This also consists of reconditioning, to make a vehicle feel like new. Stellantis boasts 21 “e-repair” centers for repairing electric vehicle batteries. Reuse refers to parts still in good condition from end-of-life vehicles sold as-is. Stellantis says it has 4.5 million multi-brand parts in inventory. These are sold in 155 countries through the B-Parts e-commerce platform. Reuse also refers second-life options, such as using batteries outside of automotive purposes. Recycling involves dismantling parts and scraps back into raw material form that is then looped back into the manufacturing process. Stellantis says it has collected 1 million parts for recycling in the past six months. Recycling doesnÂ’t get counted in that aforementioned 2 billion euros of revenue, but it does save the company money on acquisition of raw materials. As for batteries, specifically, Stellantis expects this recycling business to ramp up after 2030, when the packs currently in service begin to reach the end of their lifecycle. Stellantis will use its new “SUSTAINera” label to denote parts that are offered as part of its Circular Economy business.

