2004 Dodge Ram 1500 Srt-10 2-door 8.3l Viper Truck Well Maintained on 2040-cars

Auto blog

Takata air bag recall list

The National Highway Traffic Safety Administration confirmed yesterday that 33.8 million vehicles with Takata airbags are going to be recalled. It's the largest recall in automotive history. The already record-breaking rate of automotive recalls this year shows no signs of slowing down, especially since millions of cars with defective airbags made by global supplier Takata are under ongoing scrutiny. The federal government is warning owners that inflator mechanisms in the air bags can rupture, causing metal fragments to fly out when the bags are deployed. The faulty air bags have already been blamed for multiple deaths. How do you know if your vehicle is safe? The National Highway Traffic Safety Administration released an updated list of vehicles under recall. Sometimes however, the government's website will crash and the list may not be complete. Check your VIN at the NHTSA website to make sure. The list of cars affected by the recall has not been released, but seem to span multiple models over the years for many of the automakers.

Mopar '13 Dart is a bruiser of a compact

For the fourth year in a row, Mopar is offering a limited-production car decked with a plenty of add-ons and a unique look. This year's black-and-blue car is the Mopar '13 Dart, which was unveiled at the Chicago Auto Show with the now-signature paint scheme. Like previous Mopar models, only 500 of the '13 Darts will be built. Past models include the Mopar '10 Challenger, Mopar '11 Charger and the Mopar '12 300.
The all-black Dart gets a brightly contrasting, offset blue stripe running the full length of the car, and other styling mods like the aero-tuned body kit, gloss black grille, wheels and mirror caps. Curiously, Mopar chose to stick with the Dart's standard headlights rather than the darker, smoked lights. The interior gets a similar black-and-blue treatment, but this unique cabin features a blue leather driver's seat to go along with the black leather seating for the rest of the passengers.
More than just a styling package, the Mopar '13 Dart also gets some performance and handling goodies to complement the Dart's turbocharged 1.4-liter engine, such as upgraded brakes with slotted rotors, a lowered suspension, retuned electric power steering and a "sport-tuned" exhaust system.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat