1967 Dodge Power Waggon Wm300 on 2040-cars

Auto blog

Hellcat motor 'fits like a glove' in the Wrangler and Gladiator, says Jeep

Just like "technically correct" is the best kind of correct, "technically possible" is the best kind of possible. Specifically, it's technically possible to slot a Hellcat crate motor into the Jeep Wrangler and Gladiator, as confirmed by Jeep brand chief Tim Kuniskis. Speaking to Australian media last week, Kuniskis went on to say that "everybody" keeps asking him if the supercharged, 6.2-liter Hellcat V8 fits in the Wrangler and Gladiator, and that the answer is yes. "It fits like a glove," said Kuniskis. But — there is a but — the fitment is so close for comfort, it makes the combination one that Jeep can never produce. "There's no air space around the engine [...] so you have no crush space, you have nothing that can be used to absorb energy in a crash. It's not a problem to put it in — other than emissions and fuel economy — except it would never pass any crash tests, and that's a problem," as Kuniskis told Drive. However, since the Hellcat is now out of the bag, it's probably only a matter of time until hobbyists with access to these engines will start putting them into Wranglers and Gladiators. And with the time-honored piece of advice — just don't crash into anything — it'd be a combination worth seeing and hearing. Just to throw it out there, a "Hellcrate" engine costs less than $20,000 new. Kuniskis also said that Jeep is "gauging interest" for the J6 concept, one of the Easter Jeep Safari concepts that were just revealed. "[The J6] is just a concept at this stage. But that doesn't mean we're not going to gauge interest for it." However, he said justifying its production is apparently "tough."

2019 Dodge Charger SRT Hellcat gets some Demon goodies

The 2019 Dodge Charger SRT Hellcat has been revealed, along with details on the rest of the range. Though the new Charger doesn't look a whole lot different, there are a number of special upgrades, especially for the Hellcat. The least interesting changes are on the outside. The Hellcat and the R/T Scat Pack get a new grille with twin air intakes next to the headlights. The regular RT and GT get some sportier additions such as a hood scoop, rear spoiler, and some other revised body work. The Hellcat also now gets a matte black hood option, as seen on the gray car above. Under the skin are more interesting upgrades. The Hellcat raids the Demon parts bin for its "After-Run Chiller" that continues providing cooling to the intercooler after the engine has been shut off. This way you'll still get cool air for another run when you come back and fire it back up. The Charger Hellcat also gets the Demon's fancy "Torque Reserve" system to start generating boost right at launch. Both the Hellcat and the R/T Scat Pack also come with line lock for big smoky burnouts and "Launch Assist" for minimizing wheel hop and maximizing grip. Both cars have the same power and torque as last year's iterations, though. Dodge hasn't left out its lower-rung Charger models, either. The R/T now gets standard performance suspension and shift paddles, along with a 2.62 rear axle. The GT model is now available in rear-wheel drive, and it's being marketed as more of a performance-oriented trim for the V6. As such, it also gets the performance suspension as standard, a 3.07 rear end and shift paddles. The SXT rounds out the base of the lineup and now has an all-wheel-drive option. Output remains the same with these vehicles, and the GT continues to make 300 horsepower and 264 pound-feet of torque while the SXT makes 292 horsepower and 260 pound-feet. 2019 Dodge Chargers will start showing up on dealer lots in the third quarter of this year. If you're really eager to get one, dealers will be able to start ordering them by the end of June. Pricing hasn't been announced yet for the big sedan. Related Video:

Dodge Viper ACR still can't quite capture Nurburgring record

Dodge Viper production ended just a few weeks ago. So in an effort to go out with a bang, a crowdfunded effort sent a pair of new Viper ACRs to the Nurburgring in order to reclaim the production-car lap record. Despite its best efforts, the team failed to top the Lamborghini Huracan Performante's time of 6 minutes and 52 seconds. The Viper's best lap was 7 minutes and 3.45 seconds, leaving a seemingly insurmountable gap between it and the Lamborghini. This past week, the Vipers went out again. Unfortunately the new time of 7:3.23 only shaved a few tenths. Road & Track reports that the hot weather played a major factor into the car's performance. August is hot in Germany, and the northern part of the track had a recorded temperature of 111 degrees. This was killing tires and therefore grip. While Kumho has been kind enough to supply the team with tires, an endless supply of rubber doesn't help if they keep getting cooked. In two hours, the team managed just two hot laps, killing 16 tires in the process. It's not over. A return trip is in the works. The team believes it can slide under the 7 minute mark. Still, it looks like it's going to take some really ideal conditions to make it work. Either way, the Viper ACR is and will remain one of the fastest production cars ever built and something of the likes we'll never see again. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. News Source: Road & TrackImage Credit: Dodge Dodge Coupe Performance dodge viper acr