Dodge Neon, page #13

Dodge Neon Price Analytics

About Dodge Neon

Auto blog

Dodge Durango could get eTorque mild hybrid system in 2020

The 2020 Dodge Durango appears slated to get a mild-hybrid powertrain option. That's the word from moparinsiders.com, which unearthed the news from documents relating to contract negotiation between the FCA and the UAW. Although the documents give no further details, it's a pretty safe bet that we're talking about Chrysler's eTorque mild-hybrid system, which was introduced on the Ram 1500 pickup and has since been extended to the Jeep Wrangler. Currently, the Wrangler offers the eTorque system on the 2.0-liter inline-four and the 3.6-liter Pentastar V6, both on the Sahara model only, while the Ram 1500 makes the mild-hybrid system standard with the 3.6-liter V6 and an option with the 5.7-liter Hemi V8. The V6 eTorque powertrain makes 305 horsepower and 269 pound-feet of torque (Ram) or 285 horsepower and 260 pound-feet (Wrangler). The Wrangler's four-cylinder eTorque is good for 270 horses and 295 lb-ft. The V8 version in the Ram is good for 395 horsepower and 410 lb-ft of torque. In all cases, the eTorque system does not increase peak output over the standard version of the gasoline engine. The mild-hybrid system does provide a minor fuel-economy boost. In the Wrangler, the 3.6-liter with eTorque has EPA city estimates that are 1 mpg better than without the system. On the Ram's V8, eTorque adds 2 mpg city and 1 mpg highway. (The 2.0-liter sees no improvement in its EPA ratings.) It's not known whether the Durango will add eTorque to its V6, or V8, or both. Either engine could do with a fuel-economy boost, as the V6 is EPA rated at 19/26 mpg city/highway (RWD) and 18/25 mpg (AWD), while the V8 version has estimates of 14/22 mpg. Related Video:

Didn't get the toy you wanted for Christmas? Grab this '79 Dodge Macho Power Wagon

This Christmas, kids everywhere got tons of toys, but what about the grownups? Adults like toys, too, and we particularly like this 1979 Dodge Macho Power Wagon pickup for sale on eBay. Dodge plugged it as one of its "adult toys" back in the day, which makes it the perfect post-Christmas purchase for anyone who's feeling a little left out. Dodge began advertising a lineup of specialty trucks as "adult toys" back in 1977, during the period when trucks were first becoming personal-use vehicles rather than just workhorses. Dodge's specialty models ran though the end of the decade and included the Street Van version of its B-series panel van, the Macho Power Wagon 4x4 pickup, the Warlock short-bed stepside pickup, the Ramcharger SUV, and even a variant of the Ram 50 mini-pickup. The Macho Power Wagon was a 4WD W100 pickup with a Sweptline bed, and could be had in short- or long-wheelbase configurations. Two-tone paint included black on the lower body, the hood, and the roof. Tape stripes, painted spoke wheels, and a bed-mounted roll bar added to the look. This '79 Macho Power Wagon is a long-bed version, riding on a 131-inch wheelbase. It's powered by a 318-cubic-inch V8 with dual exhausts, mated to a three-speed column-shift automatic and four-wheel drive. Not the most manly powertrain, maybe, but it was the late '70s, and one's engine wasn't as important as one's graphics. This Power Wagon's visuals make an emphatic statement indeed, with the two-tone white and black livery set off with bright orange stripes, wheels, and most critically, POWER WAGON emblazoned on the bed and tailgate. It's enough that we can forgive the missing roll bar. Inside, we find a vinyl bench seat, a floor-mounted shifter for the two-speed transfer case, and a period-correct Craig cassette stereo. Factory A/C is also present. Sure, you could get a new Ram 2500 Power Wagon, but would that really have the gold-chain-in-a-bed-of-chest-hair swagger of this beast? If this Adult Toy speaks to you, we would point out that sometimes the best presents are the ones you get yourself. Related Video:

The Dodge Challenger 1320 is rarer than the vaunted Demon

Dodge stopped making the 840-horsepower Challenger Demon after the 2018 model year, and it filled the gap the coupe left in its range with a slightly tamer variant called 1320. While it wasn't a limited-edition model, production figures released recently cement its status as a future classic. 1320 references the length of a drag strip, which normally checks in at 1,320 feet, and the name speaks volumes: It was built to go flat-out for a quarter mile. It offered all of the go-fast goodies found in the Demon, including a transbrake, a line lock, an SRT-tuned suspension, plus bigger brakes provided by Brembo, and it swapped the supercharged V8 for a naturally-aspirated, 6.4-liter eight shared with the Challenger 392 and tuned to 485 horsepower. It wasn't quite as quick as the Demon, but it remained a race car barely street-legal enough to put plates on, so it occupied a shallow niche. Dodge made 1,054 examples of the 1320 during the 2019 model year, according to Mopar Insiders. Of those, 1,026 units were sold in the United States, and the remaining 28 stayed in their home country of Canada. As for colors, 232 enthusiasts chose Pitch Black, making it the most popular. At the other end of the spectrum, 13 buyers ordered Maximum Steel, which is the rarest color offered to the public. One 1320 was painted in Yellow Jacket, and another in Billet, but they were pre-production cars. To add context, the firm capped Demon production at 3,300 units, including 300 for the Canadian market. The 1320 is returning for the 2020 model year, so it might ultimately become more common than the Demon, but it remains a rare edition that will turn heads at high-profile classic car auctions in a few decades' time. If you've got one, race it, but pamper it off the track, and hang on to it. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

Dongfeng and PSA extend Chinese joint venture

BEIJING/PARIS — China's Dongfeng and Peugeot maker PSA are extending their business cooperation, despite the Chinese company reducing its stake in PSA to help smooth the French carmaker's merger with Fiat Chrysler Automobiles (FCA). Dongfeng said on Thursday it had agreed with PSA to extend the duration of their joint venture Dongfeng Peugeot Citroen Automobiles (DPCA). Under the deal, the venture could get the rights to PSA's new brands in China and will benefit from new technologies and intellectual properties, the Chinese company said. PSA was not immediately available for comment. The announcement comes a day after the companies said Dongfeng would reduce its 12.2% stake in PSA by selling 30.7 million shares to the French company. Analysts said the move could smooth U.S. regulatory approval for PSA's roughly $50 billion (GBP38.97 billion) merger with Italian-American carmaker FCA. The sale of Dongfeng's shares in PSA, worth around 680 million euros ($757 million), will leave the Chinese group holding around 4.5% of the merged PSA-FCA, which is set to become the world's fourth-biggest carmaker by sales volumes. "As the cooperation between Dongfeng and PSA deepens, we expect the joint venture to continue making good progress in China," a Dongfeng representative said. On a conference call, Dongfeng said DPCA would have exclusive rights to PSA's Opel cars should the partners agree to bring the brand to China, and enjoy lower prices on car parts imported from PSA. Earlier this year, a document seen by Reuters showed Dongfeng and PSA plan to cut jobs at Wuhan-based DPCA and reduce its number of car plants to try to make the venture more profitable. Chrysler Dodge Fiat Jeep RAM Citroen Peugeot China FCA PSA Dongfeng

FCA CEO Mike Manley will take undefined new role after PSA merger

MILAN — Fiat Chrysler Chief Executive Mike Manley will remain with the new group set to result from a planned merger with French rival PSA-Peugeot, Chairman John Elkann said on Wednesday. In a letter to Fiat Chrysler (FCA) employees on the day the two companies announced a binding agreement for a $50 billion tie-up to create the world's fourth-largest carmaker, Elkann said he was "delighted" that the combined group would be led by current PSA CEO Carlos Tavares. "And Mike Manley, who has led FCA with huge energy, commitment and success over the past year, will be there alongside him," he said. He did not say what position Manley would hold. Elkann — who will chair the new group — said there was still much to be done to complete the merger. "Over the coming months we must work tirelessly and determinedly to fulfill all the approval requirements needed to finalize the commitment we have signed," he said. Related Video:     Hirings/Firings/Layoffs Chrysler Dodge Fiat Jeep RAM Citroen Peugeot FCA PSA merger Mike Manley carlos tavares

Fiat Chrysler and Peugeot boards meet to finalize merger

MILAN/PARIS — The boards of Fiat Chrysler Automobiles and Peugeot will meet separately on Tuesday to discuss finalizing an initial agreement for a $50 billion merger to create the world's number four carmaker, sources said. A source close to FCA said the two companies could announce the signing of a binding memorandum early on Wednesday, followed by a conference call to explain further details later in the day. The two mid-sized carmakers announced plans six weeks ago for a tie-up to help them deal with big challenges in the industry, including a global demand downturn and the need to develop costly cleaner cars to meet looming anti-pollution rules. Ahead of the meetings, entities representing the Peugeot family, Etablissements Peugeot Freres (EPF) and FFP, unanimously approved a proposed memorandum of understanding for the planned merger, a source familiar with the situation said. FCA and PSA have said they would seek to finalize a deal by year-end to create a group with 8.7 million in annual vehicle sales. That would put it fourth globally behind Volkswagen, Toyota and the Renault-Nissan alliance. PSA's Carlos Tavares will be chief executive and FCA's John Elkann — the scion of Italy's Agnelli family, which controls FCA through their holding company Exor — chairman of the combined company. The group will include the Fiat, Jeep, Dodge, Ram, Chrysler, Alfa Romeo, Maserati, Peugeot, DS, Opel and Vauxhall brands, allowing it to serve mass and premium passenger car markets as well as those for trucks and light commercial vehicles. Related Video:       Chrysler Dodge Fiat Jeep RAM Citroen Peugeot

UAW papers reveal release dates for new Dodge, Jeep and Ram models

Documents published by the United Auto Workers union reveal key information about some of the products Dodge, Jeep and Ram will release during the early 2020s. All three brands will try to capitalize on the growing demand for trucks and SUVs in the United States. The agreement between the UAW and Fiat Chrysler Automobiles (FCA) outlines what the period between 2019 and 2023 will look like from an employee's vantage point. The $4.5 billion factory the automaker is building in Detroit will begin manufacturing a three-row Jeep model in 2020, and it will add the next-generation Grand Cherokee to its roster the following year, according to CarScoops. The new Grand Cherokee will also roll out of the Jefferson North facility that makes the current model scheduled to retire shortly before its successor arrives. The Dodge Durango will continue to be built there, and the UAW papers mention a mild-hybrid variant of the SUV due out before the end of 2020. Two body-on-frame Jeep models tentatively scheduled to revive the heritage-laced Wagoneer and Grand Wagoneer nameplates will break cover in 2021. They will be built alongside Ram pickups at the Warren Truck plant, and odds are the three models will share several components under the sheetmetal. Adding the two Jeep models is expected to create 1,400 jobs, FCA predicted. Speaking of Ram, the high-performance TRX model (pictured) aimed at the Ford F-150 Raptor's jugular is penciled in for a 2020 launch. The concept that previewed the model made its debut in 2016, so it's reasonable to assume it will have changed considerably by the time it reaches showrooms. It will be based on the newest variant of the 1500, not on the last-generation model still sold as the Classic. What won't change is the supercharged, 6.2-liter Hellcat V8 between its fenders. The plug-in hybrid Wrangler remains on track for a 2020 launch. The Cherokee will continue to come out of Belvedere Assembly in Illinois, but the UAW's documents mention "fresh models / features" off of its unibody platform. Whether that means new trim levels or additional body styles remains to be seen, but it sounds like something new and Cherokee-related is around the corner. The ancient Dodge Journey shares at least one thing with the beater you drove in high school: a four-speed automatic transmission. The gearbox is finally on its way out, according to the UAW, and the 2.4-liter four-cylinder engine that powers the entry-level model isn't long for this world, either.

2020 Dodge Durango SRT Drivers' Notes | When excess is a good thing

Performance SUVs and crossovers from non-luxury brands are still in a nascent stage of development. Models like the Porsche Cayenne Turbo, BMW X5 M and others are on subsequent generations of their high-performance high-riding machines. Meanwhile, the 2019 Dodge Durango SRT is still refreshingly new. It’s also about as American as it gets. Dodge shoehorned in the 6.4-liter V8 and gave it an exhaust system that screams ‘Murica at anyone who strays too close. It makes a glorious 475 horsepower and 470 pound-feet of torque, completing the sprint to 60 mph in 4.4 seconds. An eight-speed automatic transmission sends power to all four wheels, which means you have traction — something the Challengers and Chargers with this engine could use a bit more of. Despite the Dodge being far cheaper than other big, high performance luxury SUVs out there, it still isnÂ’t cheap. The SRT has a base price of $64,490. Ours stickers for a much higher $78,235. Unsurprisingly, Dodge makes you pay the big bucks for most of the luxury features and customization options. A $2,395 Technology Group adds adaptive cruise control, lane departure warning and forward collision avoidance systems. Fancy interior materials like a suede headliner, nicer materials on the instrument panel and carbon fiber inserts can be had in a $2,495 package. The stripes are $1,295, and the 20-inch wheels cost $995. To get the second row console with an armrest and storage, youÂ’ll have to pay an extra $595. A $78,235 Durango might sound like a completely egregious amount of money, but itÂ’s still far below what youÂ’ll pay for a BMW X7 or Mercedes-Benz GLS that goes just as fast. ItÂ’s no muscle SUV for the people, but it is a muscle SUV for more people than could afford one previously. Assistant Editor Zac Palmer: An American SUV with a giant V8 feels like a superior descendant of muscle cars than most other “muscle cars” on sale today. Both the Mustang and Camaro slant toward the sports car side of things, leaving FCA to carry on the muscle car tradition. And man, Dodge carries it on well. FCA could slot its 6.4-liter V8 into nearly anything and IÂ’d love it, so it was no surprise that I enjoyed it thrashing it about in this behemoth of an SUV. Traction off the line was one major benefit in the Durango over the Charger and Challenger. Matt the throttle and it just leaps forward, similar to the Jeep Grand Cherokee SRT.

Here's your chance to own a first-year Dodge Viper with just 333 miles

The Dodge Viper is certainly one of the most outrageous cars to come out of the 1990s, with its cartoon styling, massive 8.0-liter V10 engine, and utter disregard for anything other than performance. The first-generation models are the purest example of the breed, with an assemble-it-yourself toupee roof, side curtains, calf-searing side pipes, no air-conditioning (until '94), no airbags, no ABS, and no traction control. This first-year 1992 Viper is coming to Barrett-Jackson's Scottsdale auction in January and has just 333 miles, making it a near-new example of Chrysler's wild child. Only a couple hundred first-year Vipers were built, making them among the rarest of the breed. All '92 models were red, the same color as the 1989 show car, the overwhelming reaction to which spurred Chrysler to put the car into production as a modern-day Cobra. With the Viper's departure in 2017, the car seems destined to forever remain the improbable offspring of a moment in time. That time has passed, but an ultra-low-miles example like this allows its lucky new owner to chance to experience firsthand what all the fuss was about.

Fiat Chrysler and the UAW reach tentative labor deal

DETROIT — Fiat Chrysler Automobiles and the United Auto Workers (UAW) union on Saturday announced a tentative agreement for a four-year labor contract, a boost for the automaker as it works to merge with France's Groupe PSA. Italian-American Fiat Chrysler and PSA, the maker of Peugeot and Citroen, last month announced a planned $50 billion merger to create the world's fourth-largest automaker. The tentative agreement with Fiat Chrysler, which is subject to ratification by the union members, follows contracts that the UAW already concluded with Ford Motor Co and General Motors Co. The deal with GM followed a 40-day strike in the United States that virtually shuttered GM's North American operations and cost the automaker $3 billion. The UAW on Saturday said the contract with Fiat Chrysler included a commitment from FCA to invest $9 billion, creating 7,900 new jobs over the course of the four-year contract. Of the $9 billion, $4.5 billion was announced earlier this year, to be invested in five plants and creating 6,500 jobs. Detailed terms of the tentative agreement were not released, but they are expected to echo those under the new contracts with GM and Ford, as the UAW typically uses the first deal as a pattern for the others. "FCA has been a great American success story thanks to the hard work of our members," UAW acting President Rory Gamble said in a statement. "We have achieved substantial gains and job security provisions for the fastest growing auto company in the United States." Ratification is not a sure thing. Rank-and-file UAW members at FCA in 2015 rejected the first version of a contract. In addition, a lawsuit related to a federal corruption probe could also raise doubts among union members about the terms agreed. The federal corruption led GM to file a racketeering lawsuit against FCA, alleging that its rival bribed union officials over many years to corrupt the bargaining process and gain advantages, costing GM billions of dollars. FCA has brushed off the lawsuit as groundless. Under the UAW's deal with GM, the automaker agreed to invest $9 billion in the United States, including $7.7 billion directly in its plants, and to create or retain 9,000 UAW jobs. Ford's contract included commitments to invest more than $6 billion in its U.S. plants and to create or retain more than 8,500 UAW jobs. The deals with GM and Ford also created a pathway to full-time employment for temporary workers and left healthcare insurance coverage unchanged.