Durango Citadel Every Option 46000 Msrp Do Not Miss Out on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Weekly Recap: Toyota propels hydrogen fuel cells

Toyota is serious about hydrogen fuel cells, and it wants the auto industry to follow suit. The Japanese automaker said this week it's releasing 5,680 fuel cell patents from around the world, including technologies used on its upcoming sedan, the 2016 Mirai. The move is unusual, but not unprecedented, as Tesla similarly released its electric vehicle patents last year. The idea for Tesla, and now for Toyota, is to spur development of alternative propulsion. "By eliminating traditional corporate boundaries, we can speed the development of new technologies and move into the future of mobility more quickly, effectively and economically," said Bob Carter, Toyota Motor Sales senior vice president of automotive operations, in a statement. Toyota's fuel cell patents will be free to use through 2020, though patents related to producing and selling hydrogen will remain open forever. Toyota said it would like companies that use its patents to share their own hydrogen patents, but won't require it. "What Toyota's doing is really a logical move, and really a good move for the industry," Devin Lindsay, principal powertrain analyst with IHS Automotive, told Autoblog. The announcement was made at the Consumer Electronics Show in Las Vegas. It comes as Toyota prepares to launch the hydrogen-powered Mirai in a limited number late this year in California. The launch will be extended to the Northeastern United States next year. Toyota also has announced plans to support networks of fueling stations in each region to try to smooth consumer adoption. The Mirai has a 300-mile range on a tank of hydrogen, and it takes about five minutes to refill. Fuel cells have been receiving increased attention recently, and Audi and Volkswagen debuted hydrogen-powered cars at the 2014 Los Angeles Auto Show. Honda, another proponent of the technology, also showed its updated FCV concept in November in Japan. The company, however, has delayed its fuel cell sedan a year until 2016. Like Toyota, Honda says its hydrogen-powered car will have a range of 300 miles or more. Meanwhile, Hyundai currently offers leases for fuel-cell powered Tucsons, which have a 265-mile range, in Southern California. Despite the optimism some automakers have for fuel cells, the technology still faces barriers. A lack of filling stations has long held it back, and many consumers are not familiar with the potential benefits.

Speedkore AWD twin-turbo Carbon Charger, best birthday gift ever

The backstory the Speedkore Performance AWD twin-turbo Carbon Charger teased a couple of weeks ago might be cooler than the car itself. Alan Palermo commissioned the carbon-fiber-bodied Dodge Demon Speedkore brought to SEMA last year, the one that supplanted the 6.2-liter Hellcat V8's supercharger with twin 6875 Precision Billet T4 turbos. That blasted the Demon's usual 840 horsepower up to 1,400 hp at the flywheel, 1,203 hp at the rear tires, good for an 8.77-second quarter-mile time at 162 miles per hour. Palermo's older brother remarked, "He liked the car but was more of a four-door guy," so Alan commissioned the AWD Carbon Charger as a 65th birthday gift for his sibling. Speedkore worked with Magnaflow on the sedan, starting with a 2019 Charger Pursuit as a base. The Wisconsin tuner secured a 2020 widebody Charger from Dodge, then 3D-scanned the bodywork to create the molds reproducing most of the sheetmetal in pre-preg carbon fiber. The hood, bumpers, fenders, rockers, rear spoiler, and rear diffuser are all fashioned from the lightweight stuff.  Beyond those Precision turbos laid in by Gearhead Fabrications, Speedkore installed a custom upper plenum, Boost Leash C02 progressive boost controller, custom Thitek heads, a Fore Innovations triple-pump fuel system feeding Injector Dynamics 1,700-cc injectors, and custom HP Tuners engine software calibration. Test results showed 1,525 hp at the crank when running 26 pounds of boost.  Hellraiser Performance engineered a new transmission working an FTI torque converter at one end and a carbon fiber driveshaft at the other. Instead of fortifying an off-the-shelf AWD system, Traction Products supplied a custom transfer case machined from billet shunting power to a set of Bogart Competition Series wheels wearing Mickey Thompson ET street rubber.  Speedkore fitted last year's Demon with a front-exit twin exhaust, with a single opening on each front fender, and left the rear bumper cutouts for the traditional exhaust empty. With the Carbon Charger sedan more of a family guy, Magnaflow sorted out a quad-pipe front-exit exhaust with two openings on each front fender, and ran a three-inch stainless steel Competition Series exhaust to the rear. The driver can switch between the two, the latter version providing a "moderate interior sound."  The folks at Speedkore say they'll keep tweaking the Carbon Charger after the show to get it right for the senior Palermo. We say, "Happy birthday, sir. Enjoy."