1964 Dodge Dart on 2040-cars
Lexington, South Carolina, United States
I bought this car to put a V8 in. The slant six 225 ran very good and the push button automatic transmission did real good too. It has A-body big bolt pattern with front disc brakes and drums in rear, 8 3/4" rear with 4.10 positive gears. I have all the trim for the car and it is in good condition. The original gas tank had a hole in it so I cut the floor out of the trunk redid it and put a 20 gallon fuel cell in it. It has rust over the rear fender wells. I reskinned the front of the trunk lid because it had rust in it too. The only thing I do not have to put it back together is the intake, headers, and carburetor. I sold them. Over all this car is extremely solid and rust free. Please ask any questions you may have and thanks for looking.
|
Dodge Dart for Sale
Auto Services in South Carolina
Tony`s Automotive and Tire ★★★★★
Star Automotive ★★★★★
Sprayglo Auto Refinishing and Body Repair ★★★★★
Speed Street Collision Center ★★★★★
Presnell`s Auto Repair ★★★★★
Peterson`s Auto Service & Detail Shop ★★★★★
Auto blog
Dodge reveals a few of the goodies in the Demon crate
Tue, Mar 14 2017One of the teaser trailers for the eagerly anticipated Dodge Challenger Demon featured a big crate full of goodies for the car. As with the car, though, Dodge was a bit coy about what was inside, simply saying there were 18 items, consisting of tools and parts. Now we know what tools the car gets, and they're some very nice Snap-On pieces. All of the tools and accessories are branded with the Demon logo. And the tools included should be perfect for easy tire changes at the track. Specifically, the tools include a hydraulic jack, cordless impact wrench with charger, torque wrench, and a tire pressure gauge. There's also a fender cover to protect the paint when working under the hood, and a nice carrying bag with the Demon emblem on the side. And, naturally, all of the tools are limited-edition units made specifically to accompany the Demon. If you want to do anything more involved than wheel swaps, you'll need to supply a few tools of your own. But this should be good for the weekend drag racer or autocross driver who wants to drive down to the course on street tires, then throw on the sticky rubber at the track. Also, as you may have noted, these tools only constitute six items in Dodge's count, leaving 12 others that must be car parts. We know that among the parts are some factory Demon wheels, and items that Dodge describes as "Direct Connection Performance Parts" and the "Demon Track Pack System." Details on these remain scarce, but they will probably be revealed closer to the car's debut date of April 11. Related Video:
Chrysler Recalling 870,000 SUVs For Brake Defect
Wed, Apr 2 2014Chrysler is recalling nearly 870,000 SUVs because corrosion may make the vehicles' brakes harder to use. Jeep Grand Cherokee and Dodge Durango SUVs from the 2011 through 2014 model years are involved. Chrysler says crimp joints in the brake boosters can corrode if they're exposed to water. If the water freezes, the boosters won't aid braking as they usually do. Chrysler began investigating after some customers said their brakes felt too firm when pressed down. The company knows of one accident, but no injuries, due to the defect. Dealers will install a shield to protect the boosters for free and replace boosters that aren't working properly. Chrysler has since changed the design to make the boosters more corrosion resistant. Chrysler will notify owners of the recall, which involves 867,795 vehicles. Related Gallery Safest Crossovers For The Budget-Conscious Family View 10 Photos Recalls Chrysler Dodge
Watch Atieva's electric van outrun a BMW i8 and Dodge Viper
Mon, Aug 8 2016A little while back, automotive startup Atieva drag raced its electric van, called Edna, against a Tesla Model S and a Ferrari California in order to compare its performance against known and revered mechanical athletes. Again, the Silicon Valley-based company is putting its prototype up against electrified and conventionally powered performance vehicles on the drag strip. Last time around, Edna, the Mercedes-Benz Vito van equipped with a 900-horsepower, all-wheel-drive powertrain, bested both of its foes. In that showcase, Edna was hitting 60 mph in a little over three seconds. Comparatively, BMW lists the i8's 0-60 time at 4.2 seconds, though Road & Track clocked it at 3.8 seconds, with a quarter-mile time of 12.3 seconds. The Viper does 0-60 in 3.4 seconds. Before you even watch the video above, you can imagine how it will end, as the retuned Atieva Edna rips 0-60 mph in 2.94 seconds. Atieva clocked the quarter mile at 11.3 seconds at 117 mph. It's worth noting that driver skill can have a lot to do with a car's straight-line performance. We've witnessed Viper's elapsing the quarter mile in well under 12 seconds, which means it should be quicker in this test than the i8, if not the Edna. Still, the performance showcased in the video is exceptional. To improve Edna's stats, Atieva says it has used testing data to fine tune its AC induction motors at higher speeds once it got low-speed performance locked in. After testing in the hot California sun, including the race you see above, Atieva drove Edna 90 miles home with range to spare. As for production plans, Atieva will put this powertrain into a sedan slated for sale in 2018. In the meantime, the company will keep testing and tuning its working prototype, and has even invited the public to put their cars up against Edna in future sessions. Related Video: Related Gallery 2015 BMW i8 in Petoskey, MI News Source: Atieva, YouTube: Atieva via Electrek Green Motorsports BMW Dodge Automakers Electric Future Vehicles Videos drag race atieva