Dodge DA, page #13

Auto blog

2020 Colorado Winter Driver's Notes | Behind the Wheel S02 // E12

2020 Mercedes-AMG GLC 63 I’ve had bad luck with SUVs this winter. Especially performance ones. First, I got a 2019 Range Rover Sport SVR delivered on summers right as two feet of snow fell, rendering it undriveable. Then, coronavirus cancelled Easter Jeep Safari as well as my trip out to Moab in the 2020 Jeep Wrangler Rubicon Diesel. Thankfully, when this 469 horsepower luxury mall crawler was dropped off, the sun shone down and the snow (mostly) held off.  The first thing that I noticed was there were a few blank buttons throughout the cabin, something that you may see in an entry model vehicle, but IÂ’m not accustomed to seeing in an AMG. Not a great look for a vehicle with an $80,000 price tag. Thankfully that was where the disappointment ended. As soon as you press the start button, the engine fires up and the exhaust note is incredible. Hopping on the highway ramp near my house, I floored it, and the biturbo V8 had me pressed back into the driver's seat, and this wasnÂ’t even the S version that our staff drove last year. Inside and out, the GLC 63 was everything youÂ’d expect from Mercedes. The interior was immaculate, and while the infotainment wheel and touch pad may take some getting used to for someone who isnÂ’t familiar, by now I have it down so that I can use it without looking. And while the V8 left me smiling ear to ear, I was most impressed by the amount of useable interior space there is. I happened to be moving at the time of this review and while all of my large furniture was shoved into the back of a moving van, I was able to fit almost everything else in the back of the GLC. 2019 and 2020 Fiat 500X Trekking ItÂ’s hard to say goodbye to an AMG and then turn around and be excited when a Fiat 500X pulls in your driveway (I know, I know, automotive journalist problems). That being said, when the red Fiat pulled up, I found myself admiring it. I am very familiar with the 500X. Back in 2016 Autoblog had one for a year as our long term test vehicle. I drove that car everywhere, multiple trips up north in Michigan, and even tracked it at Gingerman Raceway for a few laps before the brakes started smoking.  The 2019 model I had in my driveway and the 2020 model I drove in the snow up in the mountains feel very similar to that car. The interior is stylish and surprisingly roomy. The greenhouse is airy.

Dodge Charger SRT Hellcat Redeye Widebody expected for 2021

As of writing, Dodge still won't confirm that a Charger SRT Hellcat Redeye Widebody exists, even though camouflaged and debadged versions have already been spotted. Furthermore, before the automaker was forced to cancel this year's LX Sprint Fest 15, a poster advertising the event pictured a Charger SRT with a Dodge Demon-like hood, thought perhaps to be a "concept" version of the sedan in question. Once expected as a product for the 2020 model year, the sedan according to Mopar Insiders is now on the way for 2021 with tweaked looks to go with the centerpiece 6.2-liter Hemi V8 with 797 horsepower and 717 pound-feet of torque. The biggest cosmetic change will be the hood, a larger, redrawn center scoop dominating the front and feeding a cold-intake system pulled from the Demon. The two heat extractors move further back on the hood and rotate 90 degrees to face the sides of the sedan instead of facing the windshield. It will be available only in widebody form, and Redeye badges will adorn the grille, fenders, and decklid. Under the skin, changes compared to the Charger SRT Hellcat include a 6,500-rpm redline, 500 rpm higher than the 707-hp Charger Hellcat, a second dual-stage fuel pump, fitment of the SRT Power Chiller and the SRT After-Run Chiller also from the Demon, as well as stronger prop shafts and half-shafts. MI also mentioned the availability of either a standard 2.62 final drive ratio or an optional 3.09 final gear, production intent for concept wheels that were slated to show at LX Spring Fest, and a new SRT Performance Spoiler. The changes could drop the dash to 60 miles per hour a couple of tenths to 3.4 seconds, and get the widebody's top speed back over the 200-mph mark.  The question now is when the sedan will make its debut. MI thinks the Charger SRT Hellcat Redeye Widebody will first greet the public at FCA's What's New media roundup this summer. However, with this month still obscured by coronavirus clouds and even late summer events still being canceled, its impossible to know when we'll get a look at the new muscle sedan. Related Video:    

Dominic Toretto's 'Fast and Furious' Lego Dodge Charger lives its life a quarter mile at a time

Fan of the "Fast and Furious" franchise and Lego kits? You're in luck. The brick-builder announced that it is now taking pre-orders for a new kit dedicated to the 1970 Dodge Charger widebody driven by Dominic Toretto (Vin Diesel) in the car heist film series.  The release of the latest installment in the "F&F" franchise may have been delayed until next year, but for better or worse, a lot of merchandising that was in the works to cross-promote the new film is still in the pipeline.  The approximately 1,100-piece Technic-line kit can be posed both on four wheels and in a wheelie stance thanks to a flip-down prop stand (which itself looks a bit like a misplaced wheelie bar). The kit includes details such as a trunk-mounted dual-bottle nitrous kit, a detailed roll cage, and other nods to the long-running movie car.  "With 1,077 pieces, this cool building set provides a fun challenge for kids who love toy model cars. Inspired by the original 1970s Dodge Charger R/T, this faithful replica is packed with realistic details," Lego's product page says. The kit features several moving parts, too, including the wheels, suspension, supercharger induction system and steering. It measures more than a foot long (15") and even comes with authentic California replica plates.  Those who want a kit will be able to pre-order it from the Lego website, with shipments starting on April 27. Those who want to roll the dice on retail availability will be able to shop for it in local stores the same day, provided those stores are open, of course.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Building The Fate Of The Furious Cars | Autoblog

Ralph Gilles publishes futuristic sketch that lampoons yellow spoiler guards

FCA design boss Ralph Gilles doesn't want to see yellow spoiler guards on future Dodge models. He joined the chorus of internet users urging Challenger and Charger owners to remove the protective strips installed at the factory by telling the story behind a futuristic-looking design sketch on his official Instagram account. The stylist explained the coronavirus work-from-home order isn't stopping his team from organizing design reviews. And, while he's not normally allowed to post images of future products on social media, he decided to make an exception. "This experimental design of a Dodge of the future fell on the cutting room floor ... because the designer decided to make the yellow spoiler guards a permanent part of the theme," he wrote. This isn't the first time Dodge has spoken out against owners who decided to keep the yellow spoiler guards on their car. The company even recently decided to make them pink to curb their popularity. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Looking beyond the spoiler's yellow accents, the sketch depicts what appears to be a coupe with a front end that shares very few styling cues with Dodge's current design language. The round headlights seen on cars like the Challenger are replaced by ultra-thin LED lines, the grille is little more than a gap, and there's a gaping air vent right below it. The entire front fascia is painted black, a look oddly reminiscent of SEAT's Bocanegra models. Sculpted sides, wheels that stick out of the wheel arches, and a glass roof add a finishing touch to the design. Gilles only posted one sketch, so we don't know what the rear end looks like. His team is busily designing the next-generation Challenger, tentatively due out by 2023, but we don't expect it will look like the sketch that surfaced on Instagram. Mark Trostle, Dodge's head of design, previously affirmed the retro lines are here to stay. The four-door Charger is due for a makeover, too, and its design isn't as firmly anchored to tradition as the Challenger's. Time will tell whether the sketch subtly previews the direction Dodge is taking the model in. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

FCA applies to trademark 'Hornet' and 'Dodge Hornet' names

FCA's trademark binge on March 6 isn't the only time this month that the automaker's appealed to the U.S. Patent and Trademark Office. Motor Trend discovered two applications FCA submitted on March 3, one for "Dodge Hornet," the other simply for "Hornet." The automaker requested to reserve both names in Canada and Mexico, too. The only time Dodge has ever used the Hornet name was on a chunky, four-door subcompact hatchback revealed at the 2006 Geneva Motor Show, planned for the European market with a 170-horsepower engine developed with BMW. Crowds loved the car, encouraging Chrysler to find a way to put it into production. What followed was three years of aborted platform-swapping efforts first with Chinese automaker Chery and then with Nissan before Chrysler gave up. In 2009, analysts suspected new owner Fiat might try to get a Hornet done on one of the Italian automaker's European platforms. Nothing came of that, either, FCA opting to resurrect another historical nameplate for the Dodge Dart sedan in 2011. If a new Dodge model gets the Hornet label, the best guess for a product that needs to succeed in North America is a crossover. With the Grand Caravan soon headed to pasture and the Journey expected to follow soon after, the brand will be left with a big sedan, a big coupe, and a big three-row crossover. A reborn Hornet could pick up where the concept left off, slotting into the compact space left by the outgoing Journey and where models like the Nitro and Caliber once lived. Another guess posits something a little larger, based off the Chrysler Pacifica platform, to lower development costs and increase utilization at the Windsor, Ontario, plant that builds the Pacifica and Grand Caravan. Or the Hornet could be a PSA Group model reworked into service for our market; that opens up the size choices, although PSA is moving all of its products to two platforms, both front-wheel-drive based. It's possible Dodge won't do anything with the name, the recent application nothing more than an attempt to reserve company property. Hudson reserved Hornet in 1950 for a sedan built from 1951 to 1954. After Hudson merged with Nash to form AMC, AMC used the name on a compact sedan built from 1969 to 1977. Chrysler took over AMC in 1987, letting the Hornet trademark expire in 1992.

Fiat Chrysler halts European production as coronavirus hits demand

MILAN — Fiat Chrysler Automobiles (FCA) is halting production for two weeks at most of its European plants to help protect staff against the coronavirus pandemic and adjust to a slump in demand, the Italian-American carmaker said on Monday. Italy has been the European country worst hit by the crisis and the first to enforce a nationwide lockdown, which has now been replicated by Spain and, to a lesser extent, by France as the virus sweeps through the continent. With all non essential services closed, including car dealers, and people forced home except for strict working needs, many forecast a heavy fall in car sales in March. FCA — which according to analyst estimates produces around 25% of its vehicles in Europe — said the suspensions through March 27 would allow it "to effectively respond to the interruption in market demand by ensuring the optimization of supply." Ferrari, meanwhile, said it closed its two plants until March 27. Ferrari said it had so far ensured production continuity, and it already implemented all the health measures decided by the Italian government at the two sites, in hometown Maranello and in Modena. But it was "now experiencing the first serious supply chain issues, which no longer allow for continued production." Marco Opipari, an analyst at Fidentiis, said a few weeks of closures was not a big problem in an over-supplied European auto industry and lost production could be recovered later on. "The real problem is on the demand side, people are not buying cars now, and sales volumes are expected to be very bad in March, with a real impact on automakers' earnings," he said. FCA said in a statement that production for its FCA Italy and luxury Maserati units would stop for two weeks, extending a temporary closure period already planned for some Italian facilities. Affected plants are Melfi, Pomigliano, Cassino, Mirafiori, Grugliasco and Modena in Italy, Kragujevac in Serbia and Tychy in Poland. The FIOM union said FCA's decision was "necessary". The carmaker said the freeze would help it to resume activity promptly once market conditions allow it. "The group is working with its supply base and business partners to be ready to enable our manufacturing operations to deliver previously planned total levels of production despite the suspension when market demand returns," it said.

Dodge Grand Caravan, Journey no longer available in the California emissions states

The Dodge Grand Caravan and the Dodge Journey are no longer available for sale in California or any of the states that follow its emissions standards (often referred to as the ZEV states). As reported by Allpar.com, the 3.6-liter Pentastar V6 in the Grand Caravan does not meet those emissions standards for 2020, and evidently neither does the 2.4-liter four-cylinder that is the sole engine offering in the Journey this year. The Pentastar V6 used in other Dodges, Chryslers and Jeeps is an updated unit that does not face the same emissions issues. The 2020 model year already was due to be the last for the Grand Caravan, which is being replaced in the lineup by a lower-priced and lower-spec version of the Chrysler Pacifica called the Chrysler Voyager. Production of the Grand Caravan at FCA's Windsor, Ontario factory is reportedly due to end in May. As for the Journey, that model has exceeded its sell-by date and is the oldest entrant in its class. The vehicle was introduced as a 2009 model, and not has seen major revisions in the 11 years since. For 2020, Dodge has cut the Journey model lineup to just two trim levels: SE Value and Crossroad (dropping the SE and the GT), and it's front-wheel drive only. But the Journey could continue — in some states at least — into the 2021 model year. Rumors of its replacement, with a sportier model based on the Alfa Romeo Stelvio, don't have it arriving until 2022 or so.

Junkyard Gem: 2007 Dodge Caliber SXT with 5-speed manual transmission

When DaimlerChrysler unleashed the Caliber as a Neon replacement for the 2007 model year, the American car-buying world was put on notice that cute transportation appliances would be kicked to the side by the hobnailed boots of a new generation of angry, brutish, truck-influenced transportation appliances. The Caliber sold well enough at first, but eventually blurred into the fleet-car background noise and got shoved aside by the Alfa-derived Dart after 2012. Since I'm always on the lookout for super-rare three-pedal cars while I'm poking around in junkyards, I check out discarded Calibers in the hope of spying such a machine. This work paid off when I spotted this first-model-year '07 in a Northern California yard last month. In fact, the 5-speed manual transmission came as standard equipment on the non-R/T Calibers in 2007, but nearly every Caliber buyer opted to get the continuously variable automatic instead. That odd-looking horizontal shifter rod reminds me of the one in the early-1970s Honda 600. One reason I check out junkyard Calibers is that I'm trying to find a Boston Acoustics "MusicGate" speaker box, an optional rig that went on the inside of the hatch, to use in my next car-parts boombox project. I haven't managed to find one yet, but I'm not giving up. This car is a luxurious SXT, the trim level that squeezed between the bare-bones SE and the high-zoot R/T. When you bought the SXT, you got the pimp-grade Chill Zone™ (a beverage compartment with internal air-conditioner ducts) as standard equipment. Now this rare Caliber sits among the discarded PT Cruisers and Avengers of the yard's Chrysler section, on the flight path of the big C-5s heading into Travis Air Force Base. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Dodge's marketers tried hard to make the Caliber look tough, even murderous, the kind of car that would use an old Polara bumper jack to beat cuddly cartoon characters to death in a spray of flying teeth and blood-spattered fur. If all Calibers had come with manual transmissions, perhaps this macho image would have stuck better than it did. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Silly little fairy!

Awesomely '80s time-capsule Dodge Daytona Turbo on Bring a Trailer

From the humble K-car, Chrysler in the 1980s was able to spin out all manner of variants, including some fairly credible (for the time) performance machines. One of the most ambitious was the Dodge Daytona Turbo, and a rarely seen example in near-new condition is selling today on Bring a Trailer. [UPDATE: The car was bid to $9,300 but failed to meet reserve. It is now for sale on the dealer's website with an asking price of $19,900.] The Daytona Turbo featured a 2.2-liter four to which was bolted a Garrett To3 turbocharger, bringing output to 143 horses and 160 pound-feet. Naturally, it's paired with a five-speed stick. And dig that black-and-white checkerboard cloth interior, with four bucket seats. The story is that the car was purchased new in Kansas, and that after driving it for two years, the original owner put his prized Daytona up on jack stands and stored it in a climate-controlled garage. This Dodge now has just over 5,000 miles on the clock. If all of the above sounds enticing, you'll be powerless to resist after watching the launch commercial for the Daytona. BaT commenter "Himselvis" posted a link to the 2-minute cinematic masterpiece, which is equal parts "Blade Runner" and Michael Jackson's "Thriller." Some heavy-duty talent was brought to bear on the project, as he recounts: "The director, Bill Butler, was the cinematographer on 'Jaws,' 'Deliverance,' 'Grease,' and 'One Flew Over the Cuckoo’s Nest.' Production designer Jim Spencer had worked on 'Gremlins,' 'Poltergeist,' and 'Stripes.' Director of photography David Watkin shot 'Out of Africa,' the BeatlesÂ’ 'HELP!' and 'Chariots of Fire.' The voiceover was provided by Billy Dee Williams." And the actor was from "Hot Dog the Movie." But the real star is the car, of course. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

One-of-four carbon fiber-bodied Dodge Challenger Demon listed for sale

Exclusivity often comes at a high price; in this case, it's $169,995. That's how much Texas exotic car dealer BJ Motors is asking for one of the four carbon fiber-bodied Dodge Challenger Demons built by Speedkore. Many enthusiasts would balk at the idea of spending Audi R8 money on a Demon, but this example isn't your average Challenger. Unveiled at the 2017 SEMA show, and upgraded with 1,400 horsepower the following year, the model ditches the standard coupe's metal body panels for carbon fiber parts to lose about 200 pounds. The example offered for sale has six miles on the odometer so odds are no one has verified its quarter-mile time. The dealer noted the Demon in its inventory is the fourth and final carbon fiber-bodied example built. It's fitted with the stock engine, meaning power comes from a supercharged, 6.2-liter V8 engine that delivers 840 horsepower and 770 pound-feet of torque when burning 100-octane race gas, or 808 horsepower and 717 pound-feet of torque when slurping pump gas. It pops a 2.9-foot wheelie as it screams to 60 mph in 2.3 seconds. The person who ordered this Demon new ticked nearly every box on the list of options. It's equipped with heated and cooled front seats, an 18-speaker sound system, plus two-tone leather and Alcantara upholstery. However, as AllPar pointed out, the dealer makes no mention of the Demon Crate, which included skinny front tires, a block-off plate for the passenger-side door mirror, and a conical air filter, among other go-fast goodies. While spending $170,000 on a Dodge Challenger sounds utterly insane, we wouldn't be surprised if this rare example in like-new condition finds a new home quicker than the Demon goes down a drag strip. Dodge made 3,300 units and stock, metal-bodied examples with delivery mileage sold for an average of $143,000 in 2018, according to Hagerty. AllPar learned Speedkore charged $90,000 for the carbon fiber conversion. The equation tilts in favor of the buyer, which suggests the car's next owner may be more of an investor than an enthusiast. If you're more into classics, Speedkore also gave a 1970 Charger the carbon fiber treatment and rounded out the modifications with a 996-horsepower Demon crate engine. Alternatively, if you have a family to haul, the company made a carbon fiber-bodied Charger with 1,525 horsepower at the crank when running 26 pounds of boost. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences.