4 Door Base D Body Collectors Only 3 Owners on 2040-cars

Auto blog

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.

Junkyard Gem: 1994 Dodge Spirit

Under Lee Iacocca's watch, Chrysler began selling the first of the modern new K-Cars for the 1982 model year, and American sales of Ks and K-derived cars and minivans continued all the way through 1995. While these vehicles saved Chrysler from near-certain doom after the agony of a government bailout in 1979, the platform had become pretty outdated by the middle 1990s (though GM didn't hesitate to sell its similar-vintage J-Cars well into our current century). The Spirit replaced its aging Aries cousin starting in 1989, and has become very tough to find today. Here's a late Spirit with the optional Mitsubishi V6 engine, found in a Denver self-service yard recently. For the 1991 and 1992 model years, the Spirit R/T was the fastest new four-door car you could buy in the United States. With 224 horsepower from a very nervous turbocharged 2.2-liter engine, the Spirit R/T could run the quarter-mile in 14.5 seconds and hit a top speed of 141 mph. Today's Junkyard Gem isn't one of those cars, unfortunately. The base engine in the 1994 Spirit was a 2.5-liter Chrysler straight-four rated at 100 horsepower, but this car has the optional 142-horse Mitsubishi 6G72 V6 engine. The 6G7 family of engines remains in production to this day, 35 years after the first one went into a Galant, and members of this engine family have powered everything from the Diamante to the Sonata. On Chrysler vehicles of all-Mitsubishi design from this era, the engines tended to have big Mitsubishi emblems prominently displayed. For a Chrysler-designed car, though, it made more sense to badge the engine as a Chrysler. Note the British spelling of the unit of displacement here; GM and Ford started that trend back in the 1960s, with the "6.5 litre" Pontiac GTO and "7.0 litre" big Fords. With the big engine plus power windows, decklid luggage rack, and other luxurious (for a Spirit) options, I'm pretty sure this car didn't start life in a fleet. It drove more than 175,000 miles during its time on the road. The resale value of a 26-year-old Detroit sedan with high miles can't be much, even if the interior still looks nice enough, so any mechanical problem (or just a trade-in) spells doom for cars such as this one. The gold insets in the aluminum wheels look very stylish. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. 117 out of 200 Americans preferred the Spirit to the Honda Accord! This content is hosted by a third party.

2014 Dodge Durango leaks ahead of NY rollout

Even though Chrysler will reportedly discontinue the Dodge Durango after the current model's lifespan - said to be around 2016 - that isn't stopping the automaker from improving its full-size, three-row SUV. The vehicle won't debut at the New York Auto Show until tomorrow, but images are already leaking out ahead of the embargo lift, and they show that the 2014 model is getting even more aggressive styling to go with more technology inside and out.
Dodge limited its early press shots of the new Durango to just the R/T trim level, but this new look adds a meaner look to this model with more dramatic projector-beam headlights along with a "floating" crosshair grille and a restyled fascia. At the rear of the Durango, LED racetrack taillights show a family resemblance to the Charger and Dart, while a new rear fascia adds to the styling while also allowing for an integrated trailer hitch.
On the tech side, the instrument panel looks to have been redesigned to include a standard seven-inch thin-film transistor (TFT) gauge cluster, and it also appears as if Chrysler's well-liked UConnect system has been updated with the 8.4-inch touchscreen found in other Chrysler vehicles. The 2013 model's conventional console shifter has been replaced by a rotary knob for gear selection, suggesting that there are transmission changes afoot as well. We'll have more details when the silks slide off this big boy tomorrow, so stay tuned.