2013 Police 3.6l Auto White on 2040-cars

Auto blog

Chrysler set to make $266M-investment into 8-speed transmission production

Chrysler will shortly make a significant $266-million investment into its Kokomo, IN transmission factory in a bid to expand production of its eight-speed automatic transmissions. The gearboxes, which are built under license from Germany's ZF Friedrichshafen, have been well received by customers and critics, and according to an SEC filing obtained by Automotive News, the transmissions will eventually find their way to all of Chrysler's rear-drive offerings (Viper and heavy-duty Ram models, aside). According to AN, a Chrysler spokesman says the investment has not been confirmed, but once it is, it'll mark the company's latest in a growing line of investments at the facility. Chrysler has poured $1.5 billion into Kokomo since 2009.

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

2020 Dodge Challenger celebrates 50th anniversary with a golden special edition

Next year will mark the 50th anniversary of the original Dodge Challenger. And obviously Dodge wouldn't let that significant date go by without a special version of the 2020 Dodge Challenger. Meet the limited production Dodge Challenger 50th Anniversary Edition. The package is offered on the V6-powered GT with rear-wheel drive, as well as the R/T, R/T Scat Pack and R/T Scat Pack Widebody. The Hellcat and Hellcat Redeye are left out, but every 2020 example will get special 50th Anniversary badges to make up for that. On the outside, the package features a matte black hood, roof and trunk lid. V8 models get a body-color Shaker scoop. This marks the first time the Shaker scoop has been available on a Widebody Challenger. Despite having a Shaker scoop, the special edition cars also get the air intake headlights pioneered by the Hellcat, and they have a "50" printed on them to go with the other 50th Anniversary badging. All models get 20-inch wheels. These are finished in what Dodge calls "Gold School." These Challengers can be painted in one of seven colors: Frostbite, Hellraisin, Sinamon Stick, Go Mango, TorRed, F8 Green or the all-new Gold Rush. Inside the Challenger 50th Anniversary Edition are Nappa leather and Alcantara-covered seats and "Sepia" stitching and embroidery. It's all matched by carbon fiber trim with copper threads woven into it. The instrument cluster and the air vent badge are finished in the car's exterior color. Dodge will build only 70 of each model in each color as a tribute to the original car's 1970 model year. This means that there will be 490 GTs, 490 R/Ts, 490 R/T Scat Packs and 490 R/T Scat Pack Widebody models for a grand total of 1,960 cars. Each model has a different price for the 50th Anniversary package. It costs $4,995 for the GT, $5,495 for the R/T, and $5,995 for the Scat Pack models. The cars go on sale this coming spring.