Dodge Charger R/T 392 HEMI Powered V8 Pro-Touring Restomod, page #13

Auto blog

This government surveillance van is both cool and creepy, and it could be yours

Whether you're planning a heist and need to gather information, or you're a government agency tracking down the leader of a crime ring, Hollywood has taught us that the unmarked van is the ideal machine for gathering intel. And apparently that's not just a Hollywood trope, because you can buy this actual, honest-to-goodness ex-government surveillance van: a 1998 Plymouth Grand Voyager. It's being sold by the Chicago suburb of Streamwood, Ill., on the government surplus auction site GovDeals. According to the description, the van was acquired by the town as part of a drug seizure and converted to surveillance duty. It looks like a plain white Grand Voyager for the most part, except for the amber flashing light on the roof. Or at least it looks like a light. It's actually the disguise for the camera periscope. Open up the sliding door of the van and you'll discover a swivel mount for the camera, a TV mounted to the back of the driver's seat, and a toolbox that holds all the electronic equipment, including battery chargers for the van and the camera. There are also solid panels behind the windows so that people walking by can't peer in and see all the equipment. It's a bit less wild than some of the vans we've seen on film, but those Hollywood vans are usually larger commercial vans that can store more people and stuff. Less interesting details include the fact that this Grand Voyager has a 3.3-liter V6 with an automatic transmission. It has just over 100,000 miles and was good for a little more than 150 horsepower and 200 pound-feet of torque when it was new. The interior looks impressively clean, as does most of the exterior, but the description and photos highlight the fact that the front strut towers are rusty and in need of repair. Included are new strut towers, but obviously the welding in and painting is the expensive part. Also, while we think this van is pretty neat, since it's an actual surveillance van like we've seen on film for years, we would feel creepy actually owning it. After all, it's a vehicle for watching people, and while a government might have a legitimate reason for doing that, your average person doesn't. Unless you need a prop for a film, are going to show it off at car shows, or are another city government needing a cheap surveillance car, we think having this would be a little too weird. But if you have one of those reasons, or are less worried about what people think, you have a few more days to bid.

Fiat/PSA's dominance in small vans hangs up EU's merger approval

BRUSSELS — EU antitrust regulators are concerned about Fiat Chrysler and Peugeot / PSA's combined high market share in small vans and may require concessions to clear their $50 billion merger, people familiar with the matter said. The companies, which are seeking to create the world's fourth biggest carmaker, were told of the European Commission's concerns last week. If Fiat and PSA fail to dispel the European Commission's doubts in the next two days and subsequently decline to offer concessions by Wednesday, the deadline for doing so, the deal would face a four-month-long investigation. The EU competition enforcer, which has set a June 17 deadline for its preliminary review, declined to comment. Fiat was not immediately available for comment while PSA had no immediate comment. Hiving off overlapping businesses, usually a regulatory demand to ensure more competition, could prove tricky for the carmakers because of the technicalities. Fiat and PSA are looking to merge to help offset slowing demand and shoulder the cost of making cleaner vehicles to meet tougher emissions regulations. The deal puts under one roof the Italian carmaker's brands such as Fiat, Jeep, Dodge, Ram, Maserati and the French company's Peugeot, Opel and DS. Related Video: Government/Legal Chrysler Dodge Fiat Jeep Maserati RAM Citroen Opel Peugeot

Watching a 2010 Dodge Challenger become a Plymouth GTX is a restomod education

We cover a lot of restomods, many of them one-off SEMA show cars and low-volume builds from professional shops that sell for hundreds of thousands of dollars. Autoevolution tells the story of Steve Mirabelli, who creates Mopar restomods as a hobby when home from his day job as a NASCAR Sprint Cup car builder for Hendrick Motorsports. Working on his own, the stuff we've seen from Mirabelli so far deserves to sit at the same table as Kore and Ring Brothers. First he spent four years turning a 2006 Dodge Charger SRT8 into a 1968 Dodge Charger, the cardinal feat being the proportions; many builds leave the modern Charger's thick sides uniting a nosecone and high Daytona wing. Mirabelli didn't let himself off so easy, finding a '68 Charger abandoned in a field to lay over the '06 chassis, then working the proportions — such as adding 11 inches to the wheelbase — so that the 20-inch wheels look like they could have been stock fitment in '68.    His current build is recasting a 2010 Dodge Challenger R/T into a thid-gen Plymouth GTX, May 6 representing two years since the first video documenting the process. These videos are another highlight. For anyone who's ever wanted to see every step in how the professionals turn classic cars into modern monsters, Mirabelli's criminally under-watched YouTube channel is the place to go. There are 43 videos so far on the GTX transformation, with Mirabelli taking time to explain and demonstrate his thought process and methods every step of the way. It's an online course in restomodding, maybe the perfect final binge before returning to our outdoor lives.  Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

Cold start comparison: 2020 Alfa Romeo Giulia Quadrifoglio vs. 2013 Dodge Challenger SRT8

The 2020 Alfa Romeo Giulia Quadrifoglio is a five-seat, compact luxury sport sedan packing 505 horsepower thanks to a 2.9-liter twin-turbocharged V6. My personal 2013 Dodge Challenger SRT8 392 is ... well ... not. It's a full-sized muscle coupe whose iron-block 6.4-liter V8 makes 470 hp in the very traditional way: it's freakin' huge, like everything else about the car.  On paper, these two have nothing in common beyond the fact that they were built by the same multi-national manufacturing entity.  But if paper were the be-all and end-all of automotive rankings, everybody would buy the same car. And we don't, especially as enthusiasts. Whether it's looks or tuning or vague "intangibles" or something as simple as the way a car sounds, we often put a priority on the things that trigger our emotions rather than setting out to simply buy whatever the "best" car is at that particular moment.  So, what do these two have in common? They both sound really, really good. Like looks, sounds are subjective. While a rubric most assuredly exists in the world of marketing (attraction is as much a science as any other human response), we have no way of objectively scoring the beauty of either of these cars, and the same applies to the qualities of the sound waves being emitted through their tail pipes.  But we can measure how loud they are. In fact, there's even an app for that. Dozens, as it turns out. So, I picked one at random that recorded peak loudness levels, and set off to conduct an entirely pointless and only vaguely scientific experiment with the two cars that happened to be in my garage at the same time.  For the test, I opened up a window and cracked the garage door (so as not to inflict carbon monoxide poisoning upon myself in the name of discovery), and then placed my phone on a tripod behind the center of each car's trunk lid. I fired each one up and let the app do the rest. I then placed my GoPro on top of the trunk for each test so that I could review the video afterward for any anomalies.  I started with the Challenger. The 6.4-liter Hemi under the hood of this big coupe is essentially the same lump found under the hood of quite a few Ram pickups, and it has the accessories to prove it. Its starter is loud and distinctive. Almost as loud, it turns out, as the exhaust itself. As its loud pew-pew faded behind the V8's barking cold start, we recorded a peak of 83.7 decibels. In the app's judgment, that's roughly the equivalent of a busy street.

Here's how to build the Hellcat-powered Dodge Magnum/Charger widebody wagon of your dreams

Dodge would undoubtedly offer a fire-breathing, Hellcat-powered variant of the Magnum if the model was still in production. It retired in 2008, and it's not coming back anytime soon, so Las Vegas-based tuner Jaye Fab is taking the matter into its own hands. It's developing a conversion kit that transforms an unsuspecting Magnum into a wide-bodied Charger wagon, and it plans to make it available to the public in the near future. If the name Jaye Fab sounds familiar, it's likely because it already made headlines in 2015 when it grafted the front end of a Charger onto a Magnum, gave the wagon a coat of can't-miss-it red paint, and drove it to SEMA. Its latest project takes the concept of a modern-day Dodge wagon a step further with a full body kit that includes wide fender flares and side skirts, among other add-ons. It's a work in progress, but we can already tell it's going to turn more than a few heads when it's finished. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. We don't know which engine the donor Magnum was powered by when it drove into Jaye Fab's shop. What's more interesting is the one it will leave with: a supercharged 6.2-liter Hellcat V8 from a Charger. The eight-cylinder develops 707 horsepower and 650 pound-feet of torque in its standard configuration, and we wouldn't be surprised if it picks up a few additional horses before Jaye Fab lets it loose on the streets of Las Vegas. The firm has done a stellar job at documenting the build on its Instagram account, and AutoEvolution learned it plans to make the kit available to Magnum owners who want a more modern-looking front end in the not-too-distant future. The mighty Hellcat V8 isn't included, but Mopar sells crate engines in search for tires to roast.

2021 Dodge Durango to get SRT Hellcat limited edition

In January, spy photographers caught what we thought might be a mild hybrid version of the coming Dodge Durango, based on information Mopar Insiders gleaned from the UAW contract with Fiat Chrysler. Turns out we were correct, Mopar Insiders citing info from sources at Fiat Chrysler that the base engine on the 2021 Durango will be a 3.6-liter Pentastar V6 with eTorque. We don't have output figures yet, but he current Durango's base engine is the non-hybrid 3.6-liter Pentastar V6 making 293 hp and 260 pound-feet of torque in SXT trim. The V6 hybrid powertrain is offered in the Ram 1500 making 305 horsepower and 269 pound-feet of torque, and the Jeep Wrangler making 285 hp and 260 lb-ft., but doesn't increase output compared to the non-hybrid engine in either of those models. We're sure buyers would love for Dodge to bump the numbers up into Ram territory, but the eTorque unit serves the god of fuel economy and low-end refinement, so we shouldn't be surprised if there's no change. The MI report says Dodge has three other powertrains coming for 2021. The 5.7-liter Hemi V8 that comes standard on the Durango RT will carry over, adding eTorque as an option. That's the same standard and optional configuration Ram offers on the 1500 equipped with the 5.7-liter Hemi V8. The Durango's V8 produces 360 hp and 390 lb-ft., versus 395 hp and 410 lb-ft in the Ram. On the Ram, the eTorque system improves fuel economy by 2 mpg in the city, 1 mpg on the highway. The 6.4-liter Hemi V8 on the Durango SRT moves into 2021 as well. But the Durango SRT will need to cede its crown to a Durango SRT Hellcat coming next year. Dodge has already put the Hellcat engine in a Durango Pursuit model for law enforcement, making the full 797-hp wrought by the Hellcat Redeye motor. A couple of months ago, Road & Track caught a Hellcat badge on a Durango in a now-removed trailer for the new "Fast & Furious" film, leading all to believe a civilian-use version of the muscle SUV was on the way. MI claims we'll get the Hellcat's 707 hp and 645 lb-ft., but the trim will launch as a limited edition bearing numbered plaques on the instrument panel.  The only bad news in all this is that production shutdowns have delayed the 2021 Durango and the brand new three-row Jeep Grand Cherokee "at least three months from their original launch dates." Related Video:    

2020 Dodge Charger R/T and Scat Pack get Daytona Edition Packages

Dodge announced the Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition late last year, limited to 501 examples, one of which has already gone to that big NASCAR infield in the sky. For the rest of the Daytona fandom, Mopar Insiders says Dodge has just opened the order books for the Daytona Edition Package available on the standard Charger R/T and Scat Pack. When optioned with the package, both trims get a Mopar cold air intake under the hood, a black spoiler, and a satin black Daytona graphic across the rear decklid and fenders. Both sedans also upgrade their side mirrors to automatically adjust downward when the transmission is put in reverse, plus an automatically-dimming driver's side mirror. Inside, they share power driver's and passenger's seats in Nappa leather and Alcantara with the Daytona logo, heated seats front and rear, a premium-stitched dash panel with gloss black instrument cluster rings, and a power tilt and telescoping steering wheel. Additional upper and lower LED lighting in the front of the cabin, plus illuminated rear cupholders, memory functions for the driver's seat, radio, and outside mirrors, and black-edge premium floor mats complete the interior changes.  The Charger R/T sits on 20 x 9-inch Lights Out painted wheels, and installs a heated steering wheel and security alarm. The Charger Scat Pack sits on 20 x 9.5-inch forged and painted aluminum wheels, and affixes more satin black decals on the roof and the hood on top of a Daytona badge on the grille. The mirrors are luxxed up further than on the R/T, being powered and heated as well as fold-away, and including a blind-spot warning. Inside the Scat Pack, a Daytona badge on the instrument panel mixes with Carbonite accents throughout the interior.  The Daytona Edition Package can be ordered in any of the 12-strong color palette, including Frostbite (pictured), Hellraisin, and Sinamon Stick that are new for 2020. The kit adds $3,495 to the prices of both cars, so before any other options, the 2020 Charger R/T Daytona comes to $41,385 after destination, the 2020 Charger Scat Pack Daytona comes to $44,985. Related Video:

Junkyard Gem: 1990 Dodge Daytona Shelby

Once Lee Iacocca took the helm at Chrysler and shifted nearly all car models to front-wheel-drive platforms — either members of the convoluted K family or descendants of the Simca-derived Omnirizon platform — he called up his pal Carroll Shelby and made a deal to help with the design of some Shelby-ized, turbocharged Dodges. This relationship resulted in the Shelby Charger starting in 1983 and the Omni GLH in 1984. For 1987, the K-based Dodge Shadow and Daytona got the Shelby treatment, and suddenly the roads of North America were awash in Shelby-badged turbocharged machinery. Most are long gone by now, but I managed to unearth this tattered and rusty '90 Shelby Daytona at a Denver yard. The Shelby Daytona stayed in production through the 1991 model year (when the car got both Shelby and IROC badging, and does anybody remember the IROC Daytona today?), but most of the examples I've found during my wrecking-yard explorations have been earlier models. You won't find many '90 or '91 Daytona Shelbys. Some junkyard shopper pulled the cylinder head and all the turbo-related goodness before I reached this car. That makes sense, because the 1990 Daytona Shelby's turbocharged 2.2-liter engine made 174 horsepower— way more than most previous turbo Chryslers. Maybe someone hot-rodded their Plymouth Caravelle with those parts. This car has the five-speed manual transmission, as it should. Note the New Car Scent Little Tree, which is the second-most common junkyard-found air freshener (after Black Ice). It's not hard to identify the main reason this car got discarded: catastrophic (by Colorado standards) body rot. 171,349 miles is pretty decent for a nervous turbocharged car from 30 years ago. I don't see many Colorado junkyard cars with brewery and/or skiing-related stickers that don't also have stickers from cannabis dispensaries, but here's one. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Pretty much just as good as the Porsche 911 Turbo, and $70,000 cheaper! Featured Gallery Junked 1990 Dodge Daytona Shelby View 21 Photos Auto News Dodge Automotive History Coupe Carroll Shelby shelby Junkyard Gems

Dodge restores Brass Monkey wheels to Challenger and Charger SRT Hellcat

For the first part of 2020, Dodge removed the option of its Devils Rim aluminum wheel design in Brass Monkey finish for the Hellcat-powered Challenger and Charger models. Mopar Insiders reports the wheels will return to the menu once Dodge starts production of its two muscle cars again, tidings to please forum members asking why they couldn't order the rims. The standard fit on the regular cars is a 20-inch Low Gloss Black Performance wheel, the options either a 20-inch Machined w/Granite Pocket wheel or a 20-inch Matte Vapor SRT aluminum wheel. On the widebody cars, standard fit is a 20-inch Carbon Black Aluminum wheel, one option being a 20-inch Warp Speed Granite wheel that's the same design as the Matte Vapor but with a different finish. The 20-inch Brass Monkeys are the second option on widebody versions of the Charger Hellcat and Hellcat Redeye, replacing the 20-inch Matte Vapor SRT Aluminum rim available on the non-widebody.   Those choices are on the Dodge configurator. At the time of writing, what's missing from the online tool are the Brass Monkey options for the standard Challengers and the Charger Hellcat Widedody models that MI says are coming. The wider versions of the Challenger Hellcat bolt on a set of 20-inchers that are 11 inches wide; we're told the standard cars will offer Brass Monkey rims in 20 x 9.5 inches. The Charger Hellcat only comes in two widebody versions, so it should get the 20x11-inch Brass Monkey wheels, but the options haven't showed up on the configurator. The sole choices at the moment are the Carbon Black Aluminum and Warp Speed Granite wheels. The other difference to note is that wheres the optional wheels on the Challenger all cost $1,095, the Charger's upgrades cost $1,295. Whenever production begins in Brampton, Ontario, again, the coveted wheels will bring another extra with them: Exterior badges done in a Black and Dark Bronze finish. Related Video:    

'CSR Racing 2' mobile game adding 'Fast & Furious' pack

Popular mobile drag-racing game CSR Racing 2 (CSR2) is constantly adding new cars, new events, and new features to keep the game fresh. In March, CSR2 released the stunning McLaren Speedtail into the game, and for April, a "Fast & Furious"-themed pack is on the way. CSR2 recently celebrated 100 seasons of racing (the game runs on its own calendar) and announced a new update is on the way. Many new vehicles are coming, including a McLaren F1 LM, a Mercedes-Benz 300 SL Coupe, a Bugatti EB110 Super Sport, a Honda NSX-R, a C3 Chevrolet Corvette ZR1, a Lamborghini Countach LP5000 Quattrovalvole, a Porsche Carrera GT and a Shelby Cobra 427 S/C.  Through various events, players will also be able to unlock more cars such as the Aston Martin Valhalla Concept, the Ferrari Monza SP1 and SP2, a TVR Griffith, a Toyota GR Supra, a Bugatti Chiron Pur Sport, a BMW M8 Competition Coupe, and for the first time in a video game, the Mini John Cooper Works GP. But possibly the most hyped vehicles included in the new update are not cars that come straight from the production line. Update 2.11 will add character cars from the "Fast & Furious" franchise.  As part of a series of special events within the game, CSR2 customers will be able to race with numerous F&F cars such as the 1970 Dodge Charger Daytona, the 2001 Veilside Honda S2000, and Jesse's iconic 1995 Volkswagen Jetta. There are no details about the specifics of the events, but the first will launch in mid-April and the rest will slowly drip the rest of the year. The new cars come after CSR2 released the "Fast & Furious" Toyota Supra, Veilside Mazda RX-7, and Mitsubishi Eclipse back in 2019.  For more information about CSR2 and the upcoming update, visit CSR2's Tumblr. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Featured Gallery CSR Racing 2 Fast and Furious Pack Auto News Toys/Games TV/Movies Dodge Honda Volkswagen Fast & Furious Honda S2000