Certified Low Miles Automatic Hemi V8 Classic Header Orange Leather Navigation on 2040-cars

Auto blog

Watch these Dodge Demons explode on a Texas drag strip

The Dodge Challenger SRT Demon is extremely quick. It can hit 60 mph from a dead stop in less time than it takes to read this sentence thanks to its supercharged 6.2-liter V8. That engine makes up to 840 horsepower and 770 pound-feet of torque, depending on what octane is running through the fuel lines. That's a ton of power going solely to the rear wheels. So much so that Dodge developed a number of features and a new set of tires specifically for the car. In our time with the Demon, the car took abuse run after run on a drag strip without skipping a beat, but it seems some actual owners aren't quite so lucky. Just take a look at what happened to a few of these cars. You can see the whole car shake and jitter right as the whole rear explodes in front of the tree. It seems the initial shock from the launch — the most taxing bit of any drag run — is what kills the differentials. Catastrophic failure is rarely pretty, but it is neat to see the whole thing occur in slow motion. Three more cars — four stock and one modified in total — suffered similar fates. Not a great look for Dodge or SRT. According to The Drive, a private drag event in Texas drew a number of Demon owners all trying to beat NHRA NHRA Top Fuel racer Leah Pritchett's time in her personal Dodge Demon — 42 stock Demons attended along with five modified cars. While no one managed to match her 9.65-second quarter-mile run, a few owners did dip below 10 seconds. Now, there are a few of caveats we must address. First, with any modified car, you run the risk of breaking something, even with a car that's set up from stock specifically for drag strips. Even a set of tires like the Mickey Thompsons shown in the video above can have an effect on driveline components. Horsepower may be king, but it's torque that's the rear killer. All that torque sends a shock through the car. Adding even more with aftermarket parts increases the risk of something failing. The modified car was apparently pushing out about 1,000 horsepower. That said, four of the five vehicles were stock, so any extra power or torque should theoretically be a non-factor. The drag strip's surface was maintained by a company called Mass Traction. FCA used Mass Traction during the Demon's development, so that too should be a non-factor in the part's failure. It's unclear what exactly caused the failures, though The Drive reports that FCA officials are investigating the matter. Related Video: This content is hosted by a third party.

Stellantis previews 4 electric platforms: Here's how they'll be used

Stellantis EV Day is hitting hard and fast this morning, with big news coming from Dodge and Ram and Jeep and the rest. But to support those brand transformations, a core initiative within Stellantis will help it become a leader in electrification. To do that, the group is developing platforms and technologies with cross-shared components and systems. This starts with four flexible BEV platforms: STLA Small, STLA Medium, STLA Large and STLA Frame. As for targeted numbers, they’re lofty: By 2024, Stellantis aims for over 500 miles of range, 0-62 mph in 2 seconds and charging 200 miles of range in 10 minutes. The four platforms will offer battery capacities from 37 kWh to more than 200 kWh. More specifically, STLA Small will offer 37-82 kWh and up to 300 miles of range. STLA Medium will have 87-104 kWh and up to 440 miles. STLA Large will provide 101-118 kWh and up to 500 miles of range. The truck-focused STLA Frame will provide 159-200+ kWh and up to 500 miles of range (and will support an electric Ram 1500 pickup). Chrysler EV Front 34 View 8 Photos Stellantis has big plans for the STLA Large platform, and is currently developing eight vehicles for it in the next three to five years. Examples of possible vehicles shown include a midsize Ram truck and a Jeep off-roader that could fight against the likes of the Toyota 4Runner. Stellantis design boss Ralph Gilles could be seen in a presentation looking over a Chrysler electric crossover based on this platform. We also saw a Wagoneer badge teased momentarily. There was a rendered silhouette of a crossover that looked like it could compete with the Ford Mustang Mach-E. Gilles said the platform would allow Stellantis to “create a long-range luxury sedan, an all-conquering muscle car, a heart-of-the-market DUV, a heart-of-the-market SUV, a very capable Jeep off-roading white-space opportunity vehicle as well as a new mid-sized truck.” See for yourself in this video starting at the 90-minute mark. As for powertrains, Stellantis is developing three electric drive modules with a shared, scalable inverter, and other common components, as well as in-house software to control them. Those drive units will offer from 70 to 330 kW (94-402 horsepower). More specifically, one EDM will provide 70 kW, a second will provide 125-180 kW, while the most potent can produce 150-330 kW.

Made in America | These cars top the most-American list

The car with the most American/Canadian content for 2022 is ... cue the drumroll ... the Lincoln Corsair, in both standard gasoline-fueled and plug-in hybrid guise. Both versions of Lincoln's compact luxury crossover earned a score of 86 — due to 72% of its parts coming from one of the two aforementioned countries — in the American University Kogod Business School's annual "Made in America Auto Index." Last year's leader, the 2021 Ford Mustang GT (when equipped with a manual transmission) fell all the way to 22nd place with a 50% rating due to a switch in transmissions sourced from Mexico. In case you're interested, that puts Ford's red-blooded American ponycar below vehicles like the Kia Sorento, Mercedes-Benz GLE-Class SUV and Lexus ES. If you're wondering how an American car that's assembled within the borders of the United States could rank below a model from a Korean, German or Japanese automaker, well, we'll let Kogod explain: "The components of the index are based on research performed by the Center for Automotive Research in Ann Arbor Michigan regarding the economic value of different components of auto manufacturing. For example, the highest ranked cars are made by U.S.-based manufacturers using American engines and transmissions, and with a high AALA percentage of U.S. and Canadian parts." There are 25 total vehicles listed in the Top 10 (there are lots of ties this year). Here's the full list: (1) Lincoln Corsair: 86 (1) Lincoln Corsair PHEV: 86 (2) Tesla Model 3 Long Range: 82.5 (3) Chevrolet Corvette Sting Ray: 81 (4) Chevrolet Colorado: 80.5 (5) Jeep Cherokee Latitude 4x4: 80 (5) Jeep Cherokee Trailhawk: 80 (5) Tesla Model 3 Performance: 80 (5) Tesla Model Y: 80 (6) Dodge Durango Citadel: 79.5 (6) Dodge Durango Blacktop AWD: 79.5 (7) Honda Passport Trailsport: 78.5 (8) Ford F-150 2.7L, 3.3L, 5.0L: 77.5 (8) Ford Ranger: 77.5 (8) Ford Bronco automatic: 77.5 (8) Tesla Model S: 77.5 (8) Tesla Model X: 77.5 (9) Jeep Grand Cherokee Laredo 3.6L: 77 (9) Jeep Grand Cherokee L LTD: 77 (9) Jeep Grand Cherokee Overland 3.6L: 77 (9) Chevrolet Camaro automatic: 77 (10) Honda Odyssey: 76 (10) Honda Ridgeline: 76 (10) Honda Pilot: 76 There's a whole long list of reasons for the above scores, with seven criteria that include factory location, headquarters location and where its various bits and pieces come from.